10 Deluxe, Solid Birch Pullout Shelves

Solid Birch, dovetail pullout/rollout shelves in widths 10" to 32"^*
full extension, 100lb capacity, ball-bearing slide hardware included

DUE TO HIGH DEMAND AND LOW SUPPLY OF WHITE BIRCH MATERIAL, RUBBERWOOD MAY BE USED AS A SUBSTITUTE ON YOU ORDER...

(The two species are very similar in their appearance and quality)

$Free Shipping**
(**Continental USA only. Other restrictions may apply. Call for details)
Questions? Call 866-937-7429 Mon-Fri, 8am until 4pm, Central

Take a look at these shelves and you'll agree...you can't beat this price for this quality of a pullout shelf package.

(Image for illustration only, kit contains ten 3" shelves with full extension, side mount slides only)

What comes in the 10 shelf special?
(Click on pictures below for larger product image)

Here's your pullout shelf	Here's your hardware
10 assembled, solid Birch, 5/8" thick dovetail pullout shelves, UV clearcoat finish, ¼" plywood bottom panel 3" tall sides 10" to 32" Width in 1/16" increments *Pullout shelves over 23" wide get a ½" thick plywood bottom panel and are priced as upgraded shelves Depths of either 18", 20" or 22" CURRENT LEAD TIME APPROXIMATELY 3 WEEKS	10 sets of full extension, 100# capacity ball bearing slides 10 sets of selected mounting hardware Mounting screws Instructions for drawer slide installation are downloadable below Pullout slide hardware ships separately
Every shelf is branded... your guarantee of quality!

How to Measure and Order Shelves
Click here for helpful information about preparing and installing the pullout/rollout shelf kit

1. In the Product Specification menu above, select your pullout shelf width range
2. Select 18", 20" or 22" for the depth of Pullout Shelf
3. Measure your opening width from left to right--then subtract if you have hinges intruding into that opening measurement or if your door doesnt swing completely out of the way-----That is your Clear Opening.  If you are using the 4L bracket method of installation, Also subtract an additional 1/4" for your UNIT WIDTH.  If you are using the 2L bracket method or rear bracket method, DO NOT subtract the additional 1/4" for your UNIT WIDTH.    Report your UNIT WIDTH to the nearest 1/16".  
4. Choose your Mounting Style:
   • 4 "L" brackets - Normally for a full depth shelf or base shelf where the new pullout/rollout will sit completely on the existing shelf or cabinet base.  Subract 1/4" from clear opening.  Both upper and lower pullout/rollout will use the 4 "L" bracket method for installation.

   • 4L Method for Base and Full Shelf (Click to open in new window)	4L Method for Base and Full Shelf

   • 2 "L" brackets - Normally for a half depth shelf, the rear of the new pullout/rollout uses 2 "L" brackets and will sit on the shelf in the rear and the front of the shelf is attached to the cabinet face/frame.  Do NOT subtract the 1/4".  The bottom or base pullout/rollout will use the 4 "L" bracket method for installation.

   • 2L Method on Half Shelf (Click to open in new window)	2L Method on Half Shelf

   • 2 rear mounting brackets - Normally used if there is no mid shelf and the new shelf will need to be mounted to the rear wall with the front of the pullout/rollout attached to the cabinet face/frame.  Do NOT subtract the 1/4".  The bottom or base pullout/rollout will use the 4 "L" bracket method for installation

   • 2RB Method for No Shelf (Click to open in new window)	2RB Method for No Shelf

   • Other - please give us a call with any questions about your particular pullout/rollout installation
   • View the diagrams for how to measure and select your installation hardware
5. Repeat steps 1, 2, 3 & 4 for all pullout shelving
6. We strongly recommend that you add the Pullout Bumpers which are offered in the pulldown menus above. These will help to protect the interior of your cabinet doors from being marred by the pullout shelves as they are pulled out or if the doors are not fully opened or closed prematurely.  The pullout shelf bumper is attached only on the hinge side of the pullout shelf front.  If your cabinet openings are hinged on only one side, then you will need only 1 bumper per shelf.  If your cabinet opening is hinged on both sides, then you will need two bumpers per pullout shelf.  See pullout bumpers here.

  ****   Your assembled pullout  will be calculated to fit into the dimension of the UNIT WIDTH that your order specifies.  Use a 22" depth in most kitchens and 18" depth in most common bathroom or vanity cabinets.

View the diagrams for how to measure and select your installation hardware

Pullout/Rollout Shelf Dimensions With 4 "L" Brackets, Full Depth Shelf (Full extension and partial extension slides require the same side clearance)

Picture above shows the finished width of this actual pullout/rollout shelf is 15"

Picture shows the 15" pullout/rollout shelf with the full extension slides attached and is now 16-1/16" wide.  This will be fine for 2 "L" bracket or 2 rear bracket method of installation. Our formula recommends 16-5/16" clear opening width to install this pullout/rollout shelf with 4 "L" brackets

These pullout shelves may be mounted to a shelf or base deck of your cabinet or the pullout shelves can be mounted directly to the cabinet face frame and/or the side or rear wall (request rear mounting bracket instead of base bracket if needed).  

Full extension drawer slide installation instructions

Here is some helpful information about preparing and installing the pullout/rollout shelf kit

Be sure to see our QuikDrawers "All in One Kit' if you want adjustable pullout shelving.

Production lead time for the 10 pack is 8-10 work days.

Pullout shelf widths above 23" are constructed with 1/2" thick bottom, included in the up-charge.