5 "Deluxe" Full Extension Pullout Shelves
Item # 27433
Please Choose Or Scroll Down For More Info:
Starting at: $341.99 / Set
5 Deluxe, Solid Birch Pullout/Rollout Shelves
Solid Birch, Dovetail Pullout/Rollout Shelves In Widths 10" To 32"*
Full Extension, 100lb Capacity, Ball-Bearing Slide Hardware Included
Questions? Call 866-937-7429 Mon-Fri, 8am until 4pm, Central
Take A Look At These Shelves & You'll Agree... You Can't Beat This Price For This Quality Of A Pullout Shelf Package.
(Image For Illustration Only, Kit contains (5) 3" Tall Shelves With Full Extension, Side Mount Slides Only.)
Included In Your 5 Shelf "Deluxe" Rollout Kit | |
(5) Standard Pullout Shelves OR Rollout Style Shelves w/ "Scoop" Cut Handle | (5) Sets Of Standard OR Soft Close Full Extension Slides |
![]() ![]() |
|
Wood Species Options | Mounting Hardware |
Birch Maple |
![]() |
|
|
![]() |
|
Every Shelf Is Branded... Your Guarantee Of Quality! |
Click here for helpful information about preparing and installing the pullout/rollout shelf kit
- Type in the clear, unobstructed opening of your cabinet to the nearest 1/16" on the "Unit Width" line for each of your pullout/rollout shelves. Your pullout /rollout shelves and hardware will be dimensioned to fit. Watch out for hinges or doors that don't open out of the way and make allowances in your clear unobstructed measurement, if this applies. If you are not shelf mounting these pullout/rollout shelves, using the 4L bracket method, choose one of the other mounting methods below. If you are mounting your shelves direct to the cabinet frame, you will want to order your shelves to fit the entire clear opening (see step 4).
- Choose your Mounting Style:
- 4 "L" brackets - Normally for a full depth shelf or base shelf where the new pullout/rollout will sit completely on the existing shelf or cabinet base. Subract 1/4" from clear opening. Both upper and lower pullout/rollout will use the 4 "L" bracket method for installation.
-
4L Method for Base and Full Shelf
(Click to open in new window)4L Method for Base and Full Shelf - 2 "L" brackets - Normally for a half depth shelf, the rear of the new pullout/rollout uses 2 "L" brackets and will sit on the shelf in the rear and the front of the shelf is attached to the cabinet face/frame. Do NOT subtract the 1/4". The bottom or base pullout/rollout will use the 4 "L" bracket method for installation.
-
2L Method on Half Shelf
(Click to open in new window)2L Method on Half Shelf - 2 rear mounting brackets - Normally used if there is no mid shelf and the new shelf will need to be mounted to the rear wall with the front of the pullout/rollout attached to the cabinet face/frame. Do NOT subtract the 1/4". The bottom or base pullout/rollout will use the 4 "L" bracket method for installation
-
2RB Method for No Shelf
(Click to open in new window)2RB Method for No Shelf - Other - please give us a call with any questions about your particular pullout/rollout installation
- View the diagrams for how to measure and select your installation hardware
- Repeat steps 1, 2, 3 & 4 for all pullout shelving
- We strongly recommend that you add the Pullout Bumpers which are offered in the pulldown menus above. If you have hinges on both sides of the cabinet opening, you will need 2 bumpers per pullout tray. If you have hinges only on 1 side of the opening, you will only need 1 bumper per pullout tray. These will help to protect the interior of your cabinet doors from being marred by the pullout shelves as they are pulled out or if the doors are not fully opened or closed prematurely. See pullout bumpers here.
If using the 4 "L" brackets, just measure your clear, unobstructed opening, and then subtract 1/4", this will be your Unit Width (Example: 15" opening, order a 14 3/4" wide set). Watch out for hinges or doors that don't open out of the way. Your assembled unit will be calculated to fit into the dimension of the opening that your order specifies. Use a 22" depth in most kitchens and 18" depth in most common bathroom or vanity cabinets.
View the diagrams for how to measure and select your installation hardware
These pullout shelves may be mounted to a shelf or base deck of your cabinet or the pullout shelves can be mounted directly to the cabinet face frame and/or the side or rear wall (request rear mounting bracket instead of base bracket if needed).
Full extension drawer slide installation instructions.
Here is some helpful information about preparing and installing the pullout/rollout shelf kit
Be sure to see our QuikDrawers "All in One Kit' if you want adjustable pullout shelving.
Production lead time for the 5 pack is approximately 15 work days.
Pullout shelf widths above 23" are constructed with 1/2" thick bottom, included in the up-charge.