MuV+ Plus Concealed Drawer Slide
Item # 3896
Please Choose Or Scroll Down For More Info:
Starting at: $34.75 / Pair
KV MuV+ Plus Undermount Drawer Slides
The MuV+ drawer slide is a concealed full extension undermount drawer slide with a 3 stage hydraulic dampener filled with silicon oil, housed in a polished stainless steel piston. When the dampener is engaged, drawers will not slam but will slowly progress through the 3 stages of dampening; initial contact, braking and gentle close.
If that were not enough, the MuV+ undermount slides are available in 2" increments in addition to the traditional 3" increments of other slide manufacturers. When you need drawer slides, consider making the smart "MuV".
| When You Buy | You Save* |
| 6 | 7.5% |
| 30 or more | 10% |
| *Discounted price will be shown in your shopping cart | |
- For either framed or frameless construction
- Height of 1-7/8" (including dampener)
- Load Range: 75 pound dynamic load rating
- Travel: Full extension for slides 18" & 21"
- Finish: Zinc finish
- Three new release levers allow adjustments on installed drawers (sold separately)
- Available for 1/2" & 5/8" " thick drawer side stock (select above)
- Drawer slides are pre-drilled for base or shelf mounting
- Self close feature is enhanced by hydraulic dampener
- Easy drawer removal with front release levers
- Minimum drawer width 8" with 1/2" or 5/8" thick sides
- Optional rear mounting bracket and slide mounting jig are available for standard duty slides
- Available in the following lengths: 18" & 21"
Here is a video that is made by KV that will help most first time installers
Choosing A Release Lever
 |
 |
 |
| MuV1D RL Up/Down Adjust |
MuV2D RL Up/Down & Side to Side Adjust |
MuV3D RL Up/Down, Side to Side and In/Out Adjust |
| Click to enlarge | ||
Release Lever Adjustment Ranges
| Part | Up/Down | Side to Side | In/Out |
| MuV1D RL | + 1/8" (3mm) | ||
| MuV2D RL | + 1/8" (3mm) | ±1/16" (1.5mm) | |
| MuV3D RL | + 1/8" (3mm) | ±1/16" (1.5mm) | + 3/32" (2.5mm) |
Drawer sizing
Sizing drawer boxes is the same as it is for most popular concealed drawer slides --
- If drawer stock is 1/2" thick, subtract 5/8" from the opening width for drawer box width
- If drawer stock is 5/8" thick, subtract 3/8" from the opening width for drawer box width
- Minimum drawer width 8" with 1/2" or 5/8" thick sides
- All drawer boxes should allow minimum difference of 3/4" for drawer box height
| KV MuV+ Undermount Slide Selection Chart for Face Frame Cabinets | |||||||
|---|---|---|---|---|---|---|---|
| Slide | Cabinet Depth | Slide Length | Drawer Length | Max Interior Depth | Min Interior Depth | Max Material Thickness | Setback |
| MuV 21 | 24" | 21.4" | 21" | 23-9/16" | 21-7/8" | 5/8" | 5/32" |
| MuV 18 | 21" | 18.4" | 18" | 20-9/16" | 18-7/8" | 5/8" | 5/32" |
| KV MuV+ Undermount Slide Selection Chart for Frameless Cabinets | ||||||
|---|---|---|---|---|---|---|
| Slide | Cabinet Depth | Min Interior Depth | Slide Length | Drawer Length | Max Material Thickness | Setback |
| MuV 21 | 24" | 21-3/4" | 21.4" | 21" | 5/8" | 5/32" |
| MuV 18 | 21" | 18-7/8" | 18.4" | 18" | 5/8" | 5/32" |
Sold as pairs
Release clips may be added in dropdown above
Rear mounting brackets may be added in dropdown above
Mounting screws may be added in dropdown above
Download Mounting Instructions for 1/2" & 5/8" thick drawers here