Shaker Style Stained Drawer Fronts


Please Choose Or Scroll Down For More Info:













Starting at: $48.04  / Each

Add to Cart:

Product Description

Custom Shaker Drawer Fronts With Veneer Center Panels Stained In Your Choice Of Stain & Glaze Combinations

Lead time: 15-16 work days, excluding date of order
(Excludes date of order)


Price will be calculated based on option selections and size

The illustrations below represent typical cabinet doors.

Cabinet doors are 3/4" wood frames with 1/4" or 3/8" veneer on MDF core panels, sanded and finished with color coats and conversion varnish topcoat.  (see finishing specifications for details)



Select your Shaker Style Drawer Front
(Model numbers are listed below style pictures)

Select model name/number below image

Albany Shaker Drawer Front Albany Shaker Drawer Front
Std 1/4" Panel for flat panel doors and drawer fronts
7½" x 3-3/8" minimum w x h
1½" Rails & 2-5/16" Stiles
1/4" MDF core veneered panel Only
Std 1/4" Panel for flat panel doors and drawer fronts
7½" x 4" minimum w x h
1½" Rails & 2-5/16" Stiles
3/8" MDF core veneered panel Only
TW-10 TW-1038


Select Your Shaker Door Material and Finish
Click On A Wood Type To See Stain & Glaze Options

Alder Alder, Knotty Birch, White* Cherry*
Cherry, Rustic Maple, Hard* Maple, Hard Rustic Maple, Soft
Oak, Red* Oak, Red, Qtr Sawn Oak, Red, Rustic Oak, White*
Paint Grade Hard Maple
Oak, White, Qtr Sawn Paint Grade Hard Maple Hickory* Hickory, Rustic
   
Pine, Knotty* Walnut*    
* Premium Grade is available

See the 
Select An Optional Glaze Color

The only valid stain and glaze options are those shown on the charts in Step Two above.


Optional Hand or Finger Pulls

Back Side Routed Finger Pulls
(priced per door)
Fingerpull rout selections
(Click to enlarge)

Hand Pull Specifications:

  • Hand pull routs are on the back side of the door and are minimally noticeable from a front view.
  • Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC)
  • Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide.
  • Not available with the following edge profiles:  E-2, FP, L-253, L-304, L-686, L-947 and RC-2
  • Adds one day to lead time.

 


Product Warranty Information

Information about Conestoga product and finishing warranties.

Special note about door sizing:

Allowable tolerances for warpage and twist for five piece doors are:

  • Up to 25-15/16" wide and 47-15/16" high - 1/8"
  • Up to 25-15/16" wide and 48" to 64-15/16" high - 1/4"
  • Up to 25-15/16" wide and 65" to 83-15/16" high - 5/16"
  • Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

  • Up to 12" wide and 21-15/16" high - 1/8"
  • 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
  • Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
  • All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 


(Click on link or image above for measuring guide)