5 Shelf Budget Pullout Kit

Item # 28042


Please Choose Or Scroll Down For More Info:
























Starting at: $299.99  / Set

Add to Cart:

Product Description

5 Budget Friendly, Birch Plywood Pullout/Rollout Shelves

1/2" Birch plywood, dovetail pullout/rollout shelves in widths 10" to 32"*
3/4 extension slide hardware included

$50 SHIPPING**
(**Continental USA only. Other restrictions may apply. Call for details)
Questions? Call 866-937-7429 Mon-Fri, 8am until 4pm, Central

Take a look at these shelves and you'll agree...you can't beat this price for this quality of a pullout shelf package.

5 Pack of Birch Plywood Pullout Shelves
(Image for illustration only, kit contains five 3" shelves with partial extension side mounted slides only)

What comes in the 5 shelf special?
(Click on pictures below for larger product image)

Here's your pullout shelf Here's your hardware
Solid Wood Pullout shelving 3/4 extension L bracket shelf mounting slides
  • 5 assembled, Birch plywood, 1/2" thick dovetail pullout shelves, UV cured clearcoat finish, ¼" plywood bottom panel
  • 2-1/2" tall sides
  • 10" to 32" Width in 1/16" increments
  • *Pullout shelves over 23" wide get a ½" thick plywood bottom panel and are priced as upgrades
  • Depths of either 18", 20" or 22"
  • 5 sets of 18", 20 or 22" deep slides with selected mounting hardware
  • Mounting screws
  • Instructions for generic drawer slide installation are downloadable below
  • Pullout slide hardware ships separately
QuikDrawers Logo
Every shelf is branded... your guarantee of quality!


How to Measure and Order Shelves
Click here for helpful information about preparing and installing the pullout/rollout shelf kit

  1. In the Product Specification menu above, select your pullout shelf width range
  2. Select 18", 20" or 22" for the depth of Pullout Shelf
  3. Type in the clear, unobstructed opening of your cabinet to the nearest 1/16", minus 1/4".  Your trays and hardware will be dimensioned to fit.  Watch out for hinges or doors that don't open out of the way.  If you are not shelf mounting these pullout/rollout shelves, choose one of the other mounting methods below.  If you are mounting your shelves direct to the cabinet frame, you will want to order your shelves to fit the entire clear opening (see step 4).
  4. Choose your Mounting Style:
    • 4 "L" brackets - Normally for a full depth shelf or base shelf where the new pullout/rollout will sit completely on the existing shelf or cabinet base.  Subract 1/4" from clear opening.  Both upper and lower pullout/rollout will use the 4 "L" bracket method for installation.
    • 4L Method for Base and Full Shelf
      (Click to open in new window)
      4L Method for Base and Full Shelf
      (Click to open in new window)
      Full Depth Mid-Shelf Full Depth Mid-Shelf
    • 2 "L" brackets - Normally for a half depth shelf, the rear of the new pullout/rollout uses 2 "L" brackets and will sit on the shelf in the rear and the front of the shelf is attached to the cabinet face/frame.  Do NOT subtract the 1/4".  The bottom or base pullout/rollout will use the 4 "L" bracket method for installation.
    • 2L Method on Half Shelf
      (Click to open in new window)
      2L Method on Half Shelf
      (Click to open in new window)
      Half Depth Mid-Shelf Half Depth Mid-Shelf
    • 2 rear mounting brackets - Normally used if there is no mid shelf and the new shelf will need to be mounted to the rear wall with the front of the pullout/rollout attached to the cabinet face/frame.  Do NOT subtract the 1/4".  The bottom or base pullout/rollout will use the 4 "L" bracket method for installation
    • 2RB Method for No Shelf
      (Click to open in new window)
      2RB Method for No Shelf
      (Click to open in new window)
       4L brackets on base - 2L brackets for upper - no Shelf Full Depth Mid-Shelf
      Brackets used for 2 RB method of installation
      Bracket used for 2 RB method of installation (per pair)
    • Other - please give us a call with any questions about your particular pullout/rollout installation
    • View the diagrams for how to measure and select your installation hardware
  5. Repeat steps 1, 2, 3 & 4 for all pullout shelving
  6. We strongly recommend that you add the Pullout Bumpers which are offered in the pulldown menus above. These will help to protect the interior of your cabinet doors from being marred by the pullout shelves as they are pulled out or if the doors are not fully opened or closed prematurely.  The pullout shelf bumper is attached only on the hinge side of the pullout shelf front.  If your cabinet openings are hinged on only one side, then you will need only 1 bumper per shelf.  If your cabinet opening is hinged on both sides, then you will need two bumpers per pullout shelf.  See pullout bumpers here.

If using the 4 "L" brackets, just measure your clear, unobstructed opening, and then subtract 1/4", this will be your width (Example: 15" opening, order a 14 3/4" wide set).  Watch out for hinges or doors that don't open out of the way.  Your assembled unit will be calculated to fit into the dimension of the opening that your order specifies.  Use a 22" depth in most kitchens and 18" depth in most common bathroom or vanity cabinets.

View the diagrams for how to measure and select your installation hardware

Pullout/Rollout Shelf Dimensions With 4 "L" Brackets, Full Depth Shelf
(Full extension and partial extension slides require the same side clearance)
Shelf width dimensions
Picture above shows the finished width of this actual pullout/rollout shelf is 15"
Shelf width combined with full extension slide dimensions
Picture shows the 15" pullout/rollout shelf with the full extension slides attached and is now 16-1/16" wide.  This will be fine for 2 "L" bracket or 2 rear bracket method of installation.
Our formula recommends 16-5/16" clear opening width to install this pullout/rollout shelf with 4 "L" brackets

These pullout shelves may be mounted to a shelf or base deck of your cabinet or the pullout shelves can be mounted directly to the cabinet face frame and/or the side or rear wall (request rear mounting bracket instead of base bracket if needed).

Rear mounting bracket used for 2 RB method of installation
Rear mounting bracket which is used for 2 RB installation method (per pair)

You will install the "Epoxy Euro" drawer slides to your shelves at the time of installation.

Here is some helpful information about preparing and installing the pullout/rollout shelf kit

Production lead time for the 5 pack is 8-10 work days.

Download generic drawer slide instructions.

Pullout shelf widths above 23" are constructed with 1/2" thick bottom, included in the up-charge.