Unfinished Custom Sized Solid Wood Cabinet Front Face Frames

Shipped Direct To You Ready To Finish
Your front face frame price will be calculated based on option selections and size

The illustrations below represent typical cabinet layouts for the number of openings.
You may submit any layout with 1 to 8 openings - not limited to the configurations shown below.

Submit a drawing with the following information to receive your quote:

• Overall cabinet front face height
• Overall cabinet front face width
• Width of each stile or rail (stiles run vertically, rails run horizontally)
• Stiles and rails can vary in widths within the same front face frame.  Example:  You can have a top rail that is 3" wide and the bottom rail remains the standard 1½" width or you can have one of the side stiles 2¼" wide because it will butt to a wall on that side.
• Maximum size available is 96" x 48" in either direction, height x width or width x height.  There are no exceptions
• Standard framing widths are 1½", additional widths are available, upcharge applies.  Each non-standard stile or rail will be charged additionally
• Minimum framing width is 3/4"
• Standard framing thickness is 3/4", 1" is available at additional charge
• Assembled face frames are front sanded only with 220 grit paper.
• Framing wider than 4½" may have one glue joint.  Framing wider than 6½" may have two glue joints
• Minimum charge is 2 sq. ft.

Just draw out your configuration and fax it or scan and email.

Our face frames can also be shipped in a stained finish or you can choose from over 1,000 beautiful paint colors. 

Select the number of openings in your front face frame

Click on any image below for the full standard selection
(Dimensions shown are for illustration only)

One Opening
Two Openings
Three Openings
Four Openings
Shop 1 Opening Designs			Shop 2 Opening Designs
Shop 3 Opening Designs			Shop 4 Opening Designs
Shop 5 Opening Designs			Shop 6 Opening Designs
Shop 7 Opening Designs			Shop 8 Opening Designs

Choose Wood Species

***Important***
Standard or Non-Standard Stile or Rail Width Charges
The standard stile and rail width for front frames is 1½".  If you wish to order either stiles or rails in a non-standard width, there will be an additional charge per stile or rail.  Select the number of non-standard stiles and/or rails in the pulldown above and this will added to your cost.

Optional Face Frame Groove
Cabinet side panels can be joined to face with glue & splines, biscuits & glue, pocket screws or your favorite method.  Plastic splines are available for sale in our fastener category.

No Groove
CWSA	CWSE
Example of spline use to join cabinet side with CWSA groove	Example of spline use to join cabinet side with CWSE groove

Submit Your Plans

(Your product will not be submitted to the production queue until your design plans have been received, a CAD drawing produced and the CAD drawing approved by customer.  Any additional charges must also be paid prior to submitting your order to production.  This process will normally be completed within one business day.)