Iron-A-Way Ironing Board Center

Quality, versatility and modern convenience are built right in!

Important Notes:

• To ensure a flat and level ironing surface, be sure to that you have a full 42” in front of the desired installation location when recessing. When surface mounting, ensure there is 46” clearance.
• While not required, we recommend 16” on hinge side to allow the door to open fully against the wall, ensuring optimal standing area when ironing.
• If installing Recessed: Placed into the wall, between 16” on center studs, protruding 3 7/8” into the room. It is recommended to attach a 2” x 4” cleat to studs, level with bottom of the opening to support cabinet when installing.
• If installing Surface Mount: Installed directly onto the wall, with no cutout, centered and anchored on secure stud. Will protrude 7 3/4” into room. Optional surface mount kit is available to finish sides of unit and recommended for complete installation.
• Unit requires 115/120v, 15 amp. supply line. Pigtails are provided in the bottom of wire raceway for hookup to supply line. Make entrance into knockout provided in top of raceway through left-hand vent hole.
• Ironing center comes standard with a flat maple veneer door and a variety of additional door options. Door opens approximately 180°, flush against the wall. Please be sure to allow 16” to the side of unit for the door to open fully open.
• The exterior of the cabinet is unfinished and ready to be painted or stained to match existing decor.