Iron-A-Way Ironing Board Center

Item # 28495


Please Choose Or Scroll Down For More Info:



$810.42  / Kit

Add to Cart:

Product Description

Iron-A-Way Ironing Board Center

Quality, versatility and modern convenience are built right in!

Product Dimensions
Overall Size
Height Width Depth
60 5/8" 15" 7 3/4"
Rough-In Opening
Height Width Depth
59 7/8" 14 3/8" 3 7/8"
Depth Into Room
Recessed   Surface Mount
3 7/8"   7 3/4"
Installation Heights
Mounting Height Above Floor Desired Ironing Height
25" 36"
24" 35"
23" 34"
22" 33"
21" 32"

Important Notes:

  • To ensure a flat and level ironing surface, be sure to that you have a full 46 1/4” in front of the desired installation location when recessing. When surface mounting, ensure there is 50 1/4” clearance.
  • While not required, we recommend 16” on hinge side to allow the door to open fully against the wall, ensuring optimal standing area when ironing.
  • If installing Recessed: Placed into the wall, between 16” on center studs, protruding 3 7/8” into the room. It is recommended to attach a 2” x 4” cleat to studs, level with bottom of the opening to support cabinet when installing.
  • If installing Surface Mount: Installed directly onto the wall, with no cutout, centered and anchored on secure stud. Will protrude 7 3/4” into room. Optional surface mount kit is available to finish sides of unit and recommended for complete installation.
  • Unit requires 115/120v, 15 amp. supply line. Pigtails are provided in the bottom of wire raceway for hookup to supply line. Make entrance into knockout provided in top of raceway through left-hand vent hole.
  • Ironing center comes standard with a flat maple veneer door and a variety of additional door options. Door opens approximately 180°, flush against the wall. Please be sure to allow 16” to the side of unit for the door to open fully open.
  • The exterior of the cabinet is unfinished and ready to be painted or stained to match existing decor.