Iron-A-Way Ironing Board Center
Item # 14741
Please Choose Or Scroll Down For More Info:
$644.26 / Kit
Add to Cart:
Iron-A-Way Ironing Board Center
Quality, versatility and modern convenience are built right in!
Product Dimensions | ||
Overall Size | ||
Height | Width | Depth |
52 | 15" | 7 3/4" |
Rough-In Opening | ||
Height | Width | Depth |
51 1/4" | 14 3/8" | 3 7/8" |
Depth Into Room | ||
Recessed | Surface Mount | |
3 7/8" | 7 3/4" |
Installation Heights | ||
Mounting Height Above Floor | Desired Ironing Height | |
29" | 36" | |
28" | 35" | |
27" | 34" | |
26" | 33" | |
25" | 32" |
Important Notes:
- To ensure a flat and level ironing surface, be sure to that you have a full 42” in front of the desired installation location when recessing. When surface mounting, ensure there is 46” clearance.
- While not required, we recommend 16” on hinge side to allow the door to open fully against the wall, ensuring optimal standing area when ironing.
- If installing Recessed: Placed into the wall, between 16” on center studs, protruding 3 7/8” into the room. It is recommended to attach a 2” x 4” cleat to studs, level with bottom of the opening to support cabinet when installing.
- If installing Surface Mount: Installed directly onto the wall, with no cutout, centered and anchored on secure stud. Will protrude 7 3/4” into room. Optional surface mount kit is available to finish sides of unit and recommended for complete installation.
- Unit requires 115/120v, 15 amp. supply line. Pigtails are provided in the bottom of wire raceway for hookup to supply line. Make entrance into knockout provided in top of raceway through left-hand vent hole.
- Ironing center comes standard with a flat maple veneer door and a variety of additional door options. Door opens approximately 180°, flush against the wall. Please be sure to allow 16” to the side of unit for the door to open fully open.
- The exterior of the cabinet is unfinished and ready to be painted or stained to match existing decor.