Dura-Close™ 24" Heavy Duty Synchronized Soft-close Slides

State of the Art in Rack and Pinion mechanism provides for the smoothest slide experience -even on wide drawers!  

Take a look at these Specifications:

• Grade 1 ANSI/BHMA certified for 50,000 cycles...
• 100lb dynamic weight rating
• Compatible with our "best-in-class" line of 500 series attachment clips (sold separately)
• Positive, no worry drawer box engagement
• Full extension travel
• For 1/2" and 5/8" thick drawer box material
• Maximum drawer application flexibility - side mount, bottom mount, small or large!
• Screw holes for bottom mounting
• Slotted mounting holes for micro adjustments  

Ordering information:

Measurement specifications for using the Vitus 500 Series Undermount Slide

• Maximum drawer width for 1/2" and 5/8" thick drawer stock - Opening width minus 3/8"
• Minimum drawer box width for 5/8" thick drawer stock - 7 1/4"
• Minimum drawer box width for 1/2" thick drawer stock - 7"
• Maximum drawer box height - Opening height minus 3/4"
• Minimum depth clearance - length of slide plus 7/8"
• Drawer box depth must be same as length of slide
• Drawer box must be notched/bored for undermount slide (select above)

Download Tech/Spec Sheet

Select a locking device in the pulldown menu above
(locking device is REQUIRED for installation)

Undermount Release Clips for the 500 Series Slides
500 Series 6-Way Heavy Duty Adjustable Clip with Zinc Base
	Vertical adjustment up to 3mm (1/8") Horizontal adjustment +/- 2mm (5/64") Depth adjustment up to 3mm (1/8")	For inset door applications Heavy duty die cast zinc base
	Description	Part Number	Ctn Qty
	6-way adjustable clip with zinc base	USClip500-2-6wz	200/per carton Packaged by pair (L/R)
500 Series 4-Way Heavy Duty Adjustable Clip with Zinc Base
	Vertical adjustment up to 3mm (1/8") Horizontal adjustment up to +/- 2mm (5/64") Heavy duty die cast zinc base
	Description	Part Number	Ctn Qty
	4-way adjustable clip with zinc base	USClip500-2-4wz	200/per carton Packaged by pair (L/R)
500 4-Way Standard Duty Adjustable Clip
	Vertical adjustment up to 3mm (1/8") Horizontal adjustment up to +/- 2mm (5/64")
	Description	Part Number	Ctn Qty
	4-way adjustable clip	USClip500-2-4w	200/per carton Packaged by pair (L/R)

Drawer release clip is attached to the underside of the drawer and this model release clip is only for use with current model Vitus undermount drawer slides.

Optional parts available in pulldown menus above

Steel Rear Bracket for Face Frame Application	Installation Screws
USE.STEEL	#6 x 5/8" Flat Head Screws

Model: use58-500.24
Slides Sold per pair
Locking device and screws sold separately
Packaged for the trade only (no screws or instructions in package)
Download a set of common installation instructions