Savoy
Solid Wood Doors & Drawer Fronts
|
| Savoy Cross Section |
|
Doors
|
|
Drawer Fronts
|
|
Savoy is a 3/4″ thick veneered door that uses a thin, veneered edge tape to cover the comopsite panel’s edges.
The Savoy Is Available In Bamboo (carmelized), Hard Maple, Walnut And Wenge!
| Savoy Door Information |
| Available Wood Species - All |
| Insert Panel |
Slab Style
|
| Framing Edge |
None |
| Framing Bead |
None |
| Height Requirements |
10" Minimum - 96" Maximum |
| Width Requirements |
6" Minimum - 28" Maximum |
| Savoy Drawer Front Information |
| Available Wood Species - All |
| Insert Panel |
Slab Style
|
| Framing Edge |
None |
| Framing Bead |
None |
| Height Requirements |
5" Minimum - 16" Maximum |
| Width Requirements |
6" Minimum - 50" Maximum |
|
| Savoy Wood Veneer Species Options |
 |
|
 |
 |
| Bamboo (Caramelized) |
Hard Maple |
Walnut |
Wenge |
|
Select Hinge Boring
|
|
If you intend to use a concealed European style hinge, here are your boring options. We normally recommend a Compact Style hinge if you have "Face Frame" style cabinets. If you have any questions, just give us a call.
|
|
For FACE FRAME Style Cabinets
|
Compact Style Hinge
|
|
"A" Boring For Compact Style Hinges
|
|
|
|
|
Compact Hinge Bore With Dowel Inserts
Select ("A" with)
Placement Is 3" To Center From Top & Bottom Of Door
|
Compact Hinge Bore Without Dowel Inserts
Select ("A" without)
Placement Is 3" To Center From Top & Bottom Of Door
|
|
|
Long Arm Style Hinges
|
|
"B" Boring For Long Arm Style Hinges
|
|
|
|
|
Long Arm Hinge Bore With Dowel Inserts
Select ("B" with)
Placement Is 3" To Center From Top & Bottom Of Door
|
Long Arm Hinge Bore Without Dowel Inserts
Select ("B" without)
Placement Is 3" To Center From Top & Bottom Of Door
|
|
|
|
For FRAMELESS Style Cabinets Using Long Arm Hinges
|
Long Arm Style Hinges
|
|
"C" Boring For Long Arm Style Hinges
|
|
|
|
|
Long Arm Hinge Bore With Dowel Inserts
Select ("C" with)
Placement Is 3 3/4" To Center From Top & Bottom Of Door
|
Long Arm Hinge Bore Without Dowel Inserts
Select ("C" without)
Placement Is 3 3/4" To Center From Top & Bottom Of Door
|
|
|
Hinge Boring Standards
|
|
Doors 8 13/16"h To 42"h Receive Two Bores
Doors 42-1/16"h To 72"h Receive Three Bores
Doors 72-1/16"h & Longer Receive Four Bores With Center Holes Set 25" In From Each End.
*Custom Boring Locations (Vertically ONLY) Is Available At Additional Cost Per Door. The Dimension From The Vertical Edge Cannot Be Changed As This Dimension Is Determined Specifically By The Hinge Type.
(Contact Customer Service If You Need More Information - Read Line Below)
(Select "Custom Boring (*Applicable Hinge Type)" In The Dropdown Menu)
Dowel Inserts Are NOT Included With Any Door. The Dowel Inserts Come With The Hinge Or Can Be Purchased Separately
|
|
Hinge Boring Dimensional Specifications
|
|
Bore Hole Is 35mm Diameter, 13.5mm Deep & The Insert Holes Are 8mm Diameter & 11.9mm Deep
|
|
|
