Semi-Custom Thermofoil Cabinet Doors

Popular Styles With "Unique" Finishes!!

You are guaranteed to find the perfect door style with our extensive selection of Shaker, contemporary and traditional thermofoil doors and drawer fronts.  Our 1 piece components are available in any of our standard thermofoil offerings in matte and satin foils.  You will appreciate the superior color consistency and quality of our thermofoil doors.

RTF Thermofoil doors and drawer fronts are grouped below into Shaker, Traditional and Contemporary Series groups

Special Note:  This manufacturer has a minimum order requirement and product orders less than $37 will have a "Small Order Fee" of $15 added to the order during checkout.
(Products offered by other manufacturers, shipping and handling charges do not apply toward the $37 manufacturer minimum.  Actual charge for your selection will be shown after you "Add to cart")

The "Step by Step" guide below offers information about your selection options to be chosen in the menus above.  Cabinet doors and drawer fronts will have a minimum charge of 1 square foot.  Warranty information below.

Typical Lead Time For Thermofoil Is 3 - 4 Weeks

Choose your Cabinet Door or Drawer Front Design

Shaker Style Thermofoil Cabinet Doors and Drawer Fronts
Bradford	Double Shaker		Lancaster
Minimum 5-3/8"w x 5-3/8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 5-3/8"w x 3"h	Minimum 5-3/8"w x 5-3/8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 5-3/8"w x 3"h		Minimum 5-3/8"w x 5-3/8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 5-3/8"w x 3"h
Lancaster Elite	Shaker		Shaker Elite
Minimum 5-3/8"w x 5-3/8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 5-3/8"w x 3"h	Minimum 5-3/8"w x 5-3/8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 5-3/8"w x 3"h		Minimum 5-3/8"w x 5-3/8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 5-3/8"w x 3"h

Shaker Door Styles	Available RTF Finish Groups
	Group 1	Group 2	Group 3	Group 4
Shaker, Double Panel Shaker, Lancaster, Shaker with Ogee, Shaker Elite, Lancaster Elite, Bradford

Traditional Style Thermofoil Cabinet Doors and Drawer Fronts
Amesbury II	Amesbury II Glazed	Breckenridge Glazed
Minimum 6-3/4"w x 6-3/4"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 6-3/4"w x 3-13/16"h	Minimum 6-3/4"w x 6-3/4"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 6-3/4"w x 3-13/16"h	Minimum 8"w x 8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 8"w x 6"h
Classic	Classic Glazed	Manchester II
Minimum 8"w x 8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 8"w x 5-3/8"h	Minimum 8"w x 8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 8"w x 5-3/8"h	Minimum 8-5/8"w x 8-5/8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 8"w x 5-7/8"h
Manchester II Glazed	Manchester III	Manchester III Glazed
Minimum 8-5/8"w x 8-5/8"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 8"w x 5-7/8"h	Minimum 9-1/16"w x 9-1/16"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 8-1/4"w x 5-7/8"h	Minimum 9-1/16"w x 9-1/16"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 8-1/4"w x 5-7/8"h
Stonebridge Glazed	Wellington
Minimum 7-1/4"w x 7-1/4"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 7-1/4"w x 4-1/4"h	Minimum 9"w x 9"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h Reduced Rail Drawer Front 9"w x 6-3/16"h

Traditional Door Styles	Available RTF Finish Groups
	Group 1	Group 2	Group 3	Group 4
Breckenridge, Classic, Manchester II, Machester III, Amesbury II, Stonebridge, Wellington
Breckenridge Glazed, Classic Glazed, Manchester II Glazed, Manchester III Glazed, Amesbury Glazed

Contemporary Style Thermofoil Cabinet Doors and Drawer Fronts
Cortina	Elegante II	Italia II
Minimum 3-1/8"w x 3-1/8"h Maximum 48"w x 96"h Slab Front Minimum 3-1/8"w x 3-1/8"h	Minimum 3"w x 3"h Maximum 48"w x 96"h Slab Front Minimum 3"w x 3"h	Minimum 3-1/8"w x 3-1/8"h Maximum 48"w x 96"h Slab Front Minimum 3-1/8"w x 3-1/8"h
Novara	Turino
Minimum 3-1/8"w x 3-1/8"h Maximum 48"w x 96"h Slab Front Minimum 3-1/8"w x 3-1/8"h	Minimum 3-1/2"w x 3-1/2"h Maximum 48"w x 96"h Slab Front Minimum 3-1/2"w x 3-1/2"h

Contemporary Door Styles	Available RTF Finish Groups
	Group 1	Group 2	Group 3	Group 4
Elegante II, Novara, Cortina, Italia II, Turino

Special Notes:

Components manufactured by Northern Contours are warranted against defects occurring in the material or manufacturing process under normal use for 5 (FIVE) years from the date of original purchase. Complete warranty certificate information is available at www.northerncontours.com or can be obtained by contacting Customer Service at 877-998-1814.
Products manufactured outside our normal specifications are not covered by our warranty. Products are not warranted if exposed to excessive heat. Proper installation of heat shields between components and ovens or between components and lighting that generates high temperatures is recommended.
Warranty covers repair or replacement of product only. Northern Contours' liability will not exceed the invoiced amount of the product.
Our manufacturing tolerance is ±1/32" or 1 mm. Warp specification is 1.5 mm per lineal foot. Warp is measured with the door on the cabinet with hinges fully adjusted. We recommend storing all raw components in a temperature-controlled environment upon delivery.

(Cabinet doors and drawer fronts will have a minimum size charge of 1 square foot)

Select Your Color

Hinge Boring Options

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a compact style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 

• Doors 9" to 42" receive two bores
• Doors 42-1/16" to 72" receive three bores
• Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
• Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
• Custom boring is available at additional cost per door (contact customer service)

For Face Frame Cabinets Using Compact Hinges
Compact hinge bore with dowel inserts Select ("HB 1") Placement is 3" to center from top and bottom of door	Compact hinge bore without dowel inserts Select ("HB 2") Placement is 3" to center from top and bottom of door
For Face Frame Cabinets Using Long Arm Hinges
Long Arm hinge bore with dowel inserts Select ("HB 5") (Custom placement charge applies) Placement is 3 5/8" to center from top and bottom of door	Long Arm hinge bore without dowel inserts Select ("HB 6") (Custom placement charge applies) Placement is 3 5/8" to center from top and bottom of door
For Frameless Cabinets Using Long Arm Hinges
Long arm hinge bore pattern with dowel inserts Select ("HB 3") (Custom placement charge applies) Placement is 3 5/8" to center from top and bottom of door	Long arm hinge bore pattern without dowel inserts Select ("HB 4") (Custom placement charge applies) Placement is 3 5/8" to center from top and bottom of door

Optional Finger Pull 

Finger pull cutouts will be on top AND bottom of door panels
Side view of cutout area	Top or bottom view of door or drawer front cutout

(Click on link or image above for measuring guide)

WARRANTY

Components manufactured by Northern Contours are warranted against defects occurring in the material or manufacturing process under normal use for 5 (FIVE) years from the date of original purchase. Complete warranty certificate information is available at www.northerncontours.com or can be obtained by contacting Customer Service at 877-998-1814.
Products manufactured outside our normal specifications are not covered by our warranty. Products are not warranted if exposed to excessive heat. Proper installation of heat shields between components and ovens or between components and lighting that generates high temperatures is recommended.
Warranty covers repair or replacement of product only. Northern Contours' liability will not exceed the invoiced amount of the product.
Remove the protective peel coat from product promptly after installation. Exposure to sun will make the peel coat difficult to remove. Adhesive residue can be cleaned with mineral spirits.
Our manufacturing tolerance is ±1/32" or 1 mm. Warp specification is 1.5 mm per lineal foot. Warp is measured with the door on the cabinet with hinges fully adjusted. We recommend storing all raw components in a temperature-controlled environment upon delivery.
Wood veneer variations in color and grain pattern are natural characteristics of wood and are not considered defects; therefore they are not covered under warranty.

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” Packages. Oversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.