Shaker Style Unfinished Cabinet Doors w/Solid Panel

Item # 27072


Please Choose Or Scroll Down For More Info:













Starting at: $52.07  / Each

Add to Cart:

Product Description

Custom Shaker Unfinished Cabinet Doors With Solid Wood Panels

  PRODUCTION LEAD TIME APPROX 11 to 13 BUSINESS DAYS


Price will be calculated based on option selections and size
The illustrations below represent typical drawer fronts.

Doors are 3/4" thick wood frames with 3/8" thick wood panels, sanded with 220 grit prior to shipping.  (see finishing specifications for details)



Select Your Shaker Cabinet Door Style
(Model numbers are listed below style pictures)

Albany Shaker Style Door  Sheldon Shaker Style Door
Sheldon Shaker Style Door Profile
7½" x 6¾" minimum w x h
2-5/16" Framing
Solid Wood Center Panel
Sheldon Shaker Style Door Profile
11-3/8" x 6¾" minimum w x h
2-5/16" Framing
Solid Wood Center Panels
Albany Sheldon 


Select Your Shaker Cabinet Door Material

Standard Grade Alder Rustic Knotty Alder Standard Grade White Birch Standard Grade Cherry
Alder Alder, Knotty Birch, White* Cherry*
Rustic Knotty Cherry Standard Grade Hard Maple Rustic Knotty Hard Maple Paint Grade Hard Maple
Cherry, Rustic Maple, Hard* Maple, Hard Rustic Maple, Soft
Standard Grade Red Oak Standard Grade Quarter Sawn Red Oak Rustic Knotty Red Oak Standard Grade White Oak
Oak, Red* Oak, Red, Qtr Sawn Oak, Red, Rustic Oak, White*
Standard Grade Quarter Sawn White Oak Paint Grade Hard Maple Standard Grade Hickory Rustic Knotty Hickory
Oak, White, Qtr Sawn Paint Grade Hard Maple Hickory* Hickory, Rustic
Standard Grade Knotty Pine Standard Grade Walnut    
Pine, Knotty* Walnut*    
* Premium Grade is available

See the 
Hinge Boring Options

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a compact style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 

  • Doors 9" to 42" receive two bores
  • Doors 42-1/16" to 72" receive three bores
  • Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
  • Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
  • Custom boring is available at additional cost per door (contact customer service)
  • Dowel inserts are not included with any door.  The dowel inserts come with the hinge or can be purchased separately.
For Face Frame Cabinets Using Compact Hinges
Compact style hinge for Boring type "A"
Compact Style Hinge for "A" boring
Hinge bore pattern for compact hinge with dowel inserts Hinge bore pattern for compact hinges without dowel inserts

Compact hinge bore with dowel inserts
Select ("A" with)

Placement is 3" to center from top and bottom of door

Compact hinge bore without dowel inserts
Select ("A" without)

Placement is 3" to center from top and bottom of door
For Face Frame Cabinets Using Long Arm Hinges
Long arm style hinge for hinge boring type "B" & "C"
Long Arm Style Hinge for "B" & "C" boring
Hinge bore pattern for long arm hinge with dowel inserts for face frame cabinets Hinge bore pattern for long arm hinge without dowel inserts for face frame cabinets
Long Arm hinge bore with dowel inserts
Select ("B" with)

Placement is 3" to center from top and bottom of door
Long Arm hinge bore without dowel inserts
Select ("B" without)

Placement is 3" to center from top and bottom of door
For Frameless Cabinets Using Long Arm Hinges
Hinge bore pattern for long arm hinge with dowel insert holes Hinge bore pattern for long arm hinge without dowel insert holes
Long arm hinge bore pattern with dowel inserts
Select ("C" with)

Placement is 3-3/4" to center from top and bottom of door
Long arm hinge bore pattern without dowel inserts
Select ("C" without)

Placement is 3-3/4" to center from top and bottom of door


Optional Hand or Finger Pulls

Back Side Routed Finger Pulls
(priced per door)
Fingerpull rout selections
(Click to enlarge)

Hand Pull Specifications:

  • Hand pull routs are on the back side of the door and are minimally noticeable from a front view.
  • Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC)
  • Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide.
  • Not available with the following edge profiles:  E-2, FP, L-253, L-304, L-686, L-947 and RC-2
  • Adds one day to lead time.


Optional Mid Rail

This is an option for adding a horizontal rail at the mid point of your door height to divide it into two panels.  Sometimes this is adviseable for tall doors and can help in mitigating door twist or warp.


Product Warranty Information

Information about Conestoga product and finishing warranties.

Special note about door sizing:

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

  • Single panel up to 26" wide and 48" tall - 1/8"
  • Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
  • Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
  • Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
  • Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

  • Up to 12" wide and 21-15/16" high - 1/8"
  • 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
  • Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
  • All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 


(Click on link or image above for measuring guide)

 

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” PackagesOversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.