Due To Lumber & Construction Market Conditions, Lead Time:  7-8 Weeks For Production
(All Lead Times Subject To Variations In Workload)

Barcelona

Door Specifications Minimum Door Width 9 5/8" Minimum Door Height 9 5/8" For "A" & "B" Hinge Boring * 10" For "C" Hinge Boring Center Panel Raise Design Specific (G-Cove Raised Panel) Inner Frame Edge Design Specific (Applied Molding) Outer Frame Edge Options Available (See Step 3 Below) - *Machine Edge Shown* Framing Width 3 3/8" - Stiles & Rails Mid-Rail Width 3 3/4" Drawer Front Specifications Minimum Drawer Front Width 9 1/16" Minimum Drawer Front Height 7 3/4" Center Panel Raise Design Specific (P-398) Inner Frame Edge Design Specific (Applied Molding) Outer Frame Edge Options Available (See Step 3 Below) - *Machine Edge Shown* Framing Width 3 3/8" - Stiles / 2 1/4" Rails Mid-Rail Width 3 3/4" (Single Vertical ONLY) Construction Cross-Section Images Door Cross-Section (Click Image For Dimensional Specs) Drawer Front Cross-Section (Click Image For Dimensional Specs)

Select Your Wood Species
* Premium Grade Available  Click Here For More Information About Wood Species & Grades (Click Images Below For Grain Detail)
Alder	Alder, Rustic (Not Available With Mitered Doors)	Birch, White*	Cherry*
Cherry, Rustic (Not Available With Mitered Doors)	Maple, Hard*	Maple, Hard Rustic (Not Available With Mitered Doors)	Hickory*
Hickory, Rustic (Not Available With Mitered Doors)	Pine, Knotty (Not Available With Mitered Doors)	Oak, Red*	Oak, Red, Qtr Sawn
Oak, Red, Rustic (Not Available With Mitered Doors)	Oak, White*	Walnut*	Maple, Paint Grade - Wood Panel
Maple, Paint Grade - MDF Panel

Select Your Framing Edge
Use This Reference Guide To Find Your Framing Edge (Outer Edge Of  Door). Also Note The Available "Hinge Boring/Hinge Type" Options For Each Profile.  Be Sure To Select The Correct "Hinge Boring" Option When Placing Doors In Your Cart. (See "Step 4" For Boring Details)
	Profiles With NO Hinge Boring Options B NO Hinge Boring Rabbet 7/16" Deep - 3/8" High C NO Hinge Boring Rabbet 7/16" Deep - 3/8" High CFP NO Hinge Boring FP NO Hinge Boring H NO Hinge Boring Rabbet 7/16" Deep - 3/8" High L-061 NO Hinge Boring L-120 NO Hinge Boring L-401 NO Hinge Boring L-946 NO Hinge Boring L-1120 NO Hinge Boring 5º Back Bevel Machine Edge w/ Rabbet NO Hinge Boring Rabbet 7/16" Deep - 3/8" High O NO Hinge Boring PRS NO Hinge Boring Rabbet 7/16" Deep - 3/8" High RC-2 NO Hinge Boring Round-2 NO Hinge Boring       Sophisticate NO Hinge Boring V NO Hinge Boring Rabbet 7/16" Deep - 3/8" High
Profiles With ALL Hinge Boring Options B-2 "A", "B" & "C" Hinge Boring CFP-2 "A", "B" & "C" Hinge Boring L-034 "A", "B" & "C" Hinge Boring L-059 "A", "B" & "C" Hinge Boring L-149 "A", "B" & "C" Hinge Boring   L-281 "A", "B" & "C" Hinge Boring L-297 "A", "B" & "C" Hinge Boring L-382 "A", "B" & "C" Hinge Boring L-723  "A", "B" & "C" Hinge Boring L-746 "A", "B" & "C" Hinge Boring L-785 "A", "B" & "C" Hinge Boring L-787 "A", "B" & "C" Hinge Boring L-803 "A", "B" & "C" Hinge Boring L-966 "A", "B" & "C" Hinge Boring L-977 "A", "B" & "C" Hinge Boring                L-1117 "A", "B" & "C" Hinge Boring 5º Back Bevel L-1160 "A", "B" & "C" Hinge Boring  L-1169 "A", "B" & "C" Hinge Boring L-1185 "A", "B" & "C" Hinge Boring L-1194 "A", "B" & "C" Hinge Boring 5º Back Bevel LC-2 "A", "B" & "C" Hinge Boring LC-Inset "A", "B" & "C" Hinge Boring Machine Edge "A", "B" & "C" Hinge Boring PRS-2 "A", "B" & "C" Hinge Boring V-2 "A", "B" & "C" Hinge Boring
Profiles With LIMITED Hinge Boring Options C-2 "B" & "C" Hinge Boring Only E-2 "B" & "C" Hinge Boring Only 5º Back Bevel H-2 "B" & "C" Hinge Boring Only 5º Back Bevel J-2 "B" & "C" Hinge Boring Only L-253 "B" & "C" Hinge Boring Only 5º Back Bevel     L-304 "B" & "C" Hinge Boring Only 5º Back Bevel L-686 "B" & "C" Hinge Boring Only 5º Back Bevel L-1323 "B" & "C" Hinge Boring Only 5º Back Bevel
Some Edge Profiles Are NOT Recommended For Use With Euro, Demountable Or Inserta Style Hinges.  SEE HINGE BORING NOTES UNDER EACH PROFILE. Edges Displayed Above Are Computer Generated To Represent The Actual product As Closely As Possible But May Not Be Exact. If You Are Seeking An Exact Match, Contact Us For A Sample.

Select Hinge Boring

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a Compact Style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call.

For FACE FRAME Style Cabinets

Compact Style Hinge "A" Boring For Compact Style Hinges Compact Hinge Bore With Dowel Inserts Select ("A" with) Placement Is 3" To Center From Top & Bottom Of Door Compact Hinge Bore Without Dowel Inserts Select ("A" without) Placement Is 3" To Center From Top & Bottom Of Door

Long Arm Style Hinges "B" Boring For Long Arm Style Hinges Long Arm Hinge Bore With Dowel Inserts Select ("B" with) Placement Is 3" To Center From Top & Bottom Of Door Long Arm Hinge Bore Without Dowel Inserts Select ("B" without) Placement Is 3" To Center From Top & Bottom Of Door

For FRAMELESS Style Cabinets Using Long Arm Hinges

Long Arm Style Hinges "C" Boring For Long Arm Style Hinges Long Arm Hinge Bore With Dowel Inserts Select ("C" with) Placement Is 3 3/4" To Center From Top & Bottom Of Door Long Arm Hinge Bore Without Dowel Inserts Select ("C" without) Placement Is 3 3/4" To Center From Top & Bottom Of Door Hinge Boring Standards Doors 8  13/16"h To 42"h Receive Two Bores Doors 42-1/16"h To 72"h Receive Three Bores Doors 72-1/16"h & Longer Receive Four Bores With Center Holes Set 25" In From Each End. *Custom Boring Locations (Vertically ONLY) Is Available At Additional Cost Per Door.  The Dimension From The Vertical Edge Cannot Be Changed As This Dimension Is Determined Specifically By The Hinge Type. (Contact Customer Service If You Need More Information - Read Line Below) (Select "Custom Boring (*Applicable Hinge Type)" In The Dropdown Menu) Dowel Inserts Are NOT Included With Any Door.  The Dowel Inserts Come With The Hinge Or Can Be Purchased Separately Hinge Boring Dimensional Specifications Bore Hole Is 35mm Diameter, 13.5mm Deep & The Insert Holes Are 8mm Diameter & 11.9mm Deep

Need A Mid-Rail?
Adding A Mid-Rail Is Meant To Offer Additional Support To An Oversized Door, Drawer Front Or Panel, Which Will Help To Mitigate Door Warpage Due To The Overall Dimensions Of The Door, Drawer Front Or Panel. (See "Manufacturer's Product Warranty Information" Below For Acceptable Warpage Tolerances)
Horizontal Mid-Rails
Single Horizontal Mid-Rail	We Recommend Adding A SINGLE HORIZONTAL MID-RAIL When The Door/Panel Is Between 48" & 60" Tall And A DOUBLE HORIZONTAL MID-RAIL When The Door/Panel Is Between 60" & 96" Tall Doors Shorter Than 48" Do Not Typically Require A Mid-Rail.  You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.	Double Horizontal Mid-Rail
Vertical Mid-Rails
Doors
Single Vertical Mid-Rail	We Recommend Adding A SINGLE VERTICAL MID-RAIL When The Door Is Between 24" & 36" Wide We Recommend Adding A DOUBLE VERTICAL MID-RAIL When The Door Is Greater Than 36" Wide Doors Narrower Than 24" Do Not Typically Require A Mid-Rail.  You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.	Double Vertical Mid-Rail
Drawer Fronts
Typically, Drawer Fronts Will Not Require A Mid-Rail.  However, On Larger/Oversized Drawer Fronts, It Is Good Practice To Use A Mid-Rail When The Drawer Box Is Less Than Or Equal To 1/2 The Height Of The Drawer Front. You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.

Enter Your Dimensions

Use The Dropdowns To Input Your Door Or Drawer Front, Height & Width Dimensions. See Item Specifications For Minimum Dimension Requirements. Be Sure To Input Your FINISHED Dimensions.  The Dimensions You Provide Will Be The Final/Finished Size.

(Click On The Image Above For Measuring Guide)