Strata Cabinet Doors & Drawer Fronts - Slab Style

Item #27783

Please Choose Or Scroll Down For More Info:












Starting at: $33.22 / Each

Add to Cart:
Product Description

Strata cabinet doors in Swiss Almond

Shown in Oregon Pine Finish

Contemporary Strata Slab Style Cabinet Doors & Drawer Fronts

When Conestoga first introduced its Strata TSS program, its Thermo Structured Surfaces (TSS) in single textured Slab design and five exclusive colors, it was a hit with customers who were all about modern kitchen design. Since then, Cleaf, our Italian design partner, has taken TSS up more than a few notches for the American market to 26 desirable new colors and some of the most aggressive face textures in the industry. This includes linear grain patterns and textures – as well as registered-embossed textures that match the board’s grain patterns.

In addition to our edgebanded Slab design, we’ve added 3-piece and 5-piece doors and drawer fronts with complementary accessories, including textured sheets of phenolic veneers, cut-to-size 8mm and 19mm board, and 4’ x 8’ sheet stock. So, when it comes to color and texture, the sky’s the limit!”

Conestoga has long been considered the industry leader in uncompromised quality and selection to satisfy customer demand. The new Strata TSS expansion more than lives up to that reputation.
Strata Slab Door Style
Strata Slab Door Design Min: 2-3/4"W x 6-3/8"H (Vertical Grain)
Max: 48"W x 96"H (Vertical Grain)
Min: 6-3/8"W x 2-3/4"H (Horizontal Grain)
Max: 96"W x 48"H (Horizontal Grain)
Vertical grain standard on doors and drawer fronts
Choose Your Color/Pattern
Click on any sample to enlarge
Strata Ash Brown
Ash Brown
DISCONTINUED		 Strata Aspen Oak
Aspen Oak		 Strata Barn Oak
Barn Oak		 Strata Bianco
Bianco
Strata Burned
Burned*		 Strata Cafe
Cafe		 Strata Carbone
Carbone		 Strata City Oak
City Oak
Strata Concrete
Concrete*
Strata Cypress Point
Cyrpress Point
Strata Dark Concrete
Dark Concrete*
Strata Dark Concrete
Dublin*
Strata Engadina
Engadina*
Strata French Grey
French Grey*
Strata French Roast
French Roast
Strata Graphite
Graphite
Strata Light Carbon
Light Carbon*
Strata Lounge Brown
Lounge Brown
Strata Madrid
Madrid*
Strata Nero
Nero
Strata Oregon Pine
Oregon Pine		 Strata Palissandro
Palissandro		 Strata Silver Sand
Silver Sand*		 Strata Stratos
Stratos*
Strata Swiss Almond
Swiss Almond		 Strata Toasted Espresso
Toasted Espresso		 Strata Tuscan Cypress
Tuscan Cypress		 Strata Vineyard Oak
Vineyard Oak

*Indicates non-stock color/finish
Some Strata colors have different levels of texture on the face than on the back.

Lead time for stock patterns is 7-8 work days.  Non-stock patterns is 10-11 work days.
Strata Hand Pull (Optional)
  • Widths: Min. for doors - 2-3/4", drawer fronts - 6-3/8" / Max. 36" for either doors or fronts
  • Available on all Strata colors - Slab only
  • Not available with sequential grain match program
  • Doors and drawer fronts are routed on the top edge to accept hand pull - no other options
  • Hand pulls are cut to size, labeled to match the corresponding panel, wrapped and shipped separately
  • Hand pulls are designed with an integral inset spline.  Silicone caulk or construction adhesive can be used to affix the handle to the panel
  • When ordering Strata doors or drawer fronts with the hand pull option, specify the total height of the door or front, including the hand pull.  The factory will subtract the height of the hand pull and size the panel accordingly

C - Hand Pull

Shown in Polished Chrome

J- Hand Pull

Shown in Natural Aluminum

Hinge Boring Options

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a compact style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 

  • Doors 9" to 42" receive two bores
  • Doors 42-1/16" to 72" receive three bores
  • Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
  • Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
  • Custom boring is available at additional cost per door (contact customer service)
For Face Frame Cabinets Using Compact Hinges
Compact style hinge for Boring type "A"
Compact Style Hinge for "A" boring
Hinge bore pattern for compact hinge with dowel inserts Hinge bore pattern for compact hinges without dowel inserts

Compact hinge bore with dowel inserts
Select ("A" with)
Placement is 3" to center from top and bottom of door

 Compact hinge bore without dowel inserts
Select ("A" without)
Placement is 3" to center from top and bottom of door
For Face Frame Cabinets Using Long Arm Hinges
Long arm style hinge for hinge boring type "B" & "C"
Long Arm Style Hinge for "B" & "C" boring
Hinge bore pattern for long arm hinge with dowel inserts for face frame cabinets Hinge bore pattern for long arm hinge without dowel inserts for face frame cabinets
Long Arm hinge bore with dowel inserts
Select ("B" with)
Placement is 3" to center from top and bottom of door		 Long Arm hinge bore without dowel inserts
Select ("B" without)
Placement is 3" to center from top and bottom of door
For Frameless Cabinets Using Long Arm Hinges
Hinge bore pattern for long arm hinge with dowel insert holes Hinge bore pattern for long arm hinge without dowel insert holes
Long arm hinge bore pattern with dowel inserts
Select ("C" with)
Placement is 3-3/4" to center from top and bottom of door		 Long arm hinge bore pattern without dowel inserts
Select ("C" without)
Placement is 3-3/4" to center from top and bottom of door
 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

Measuring for new or replacement cabinet doors and drawers
(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” Packages. Oversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.