Custom Sized Unfinished "Solid" Or "Open" Louver Cabinet Doors

Current Lead Time:  12-14 Business Days For Production
(All lead times are subject to variations in workload)

Choose Your Louvered Door Style
"Solid" Louver Door (Available Unfinished or Painted)		"Open" Louver Door (Available Unfinished Only)
(Shown In Walnut)		(Shown In Walnut)
Door Specifications
Louvered Doors With The "Closed" Louver Look Air & Light Will Not Pass Through The Door Built With Solid Wood Outer Frames & Solid Wood "Louvered Panel" Center Panel Staves (See Crosscut Image Below)		Louvered Doors With The "Open" Louver Look & Purpose Air & Light Will Pass Through The Door Built With Solid Wood Outer Frames & Solid Wood "Louver Strip" Center Panel (See Crosscut Image Below)
(("B")Slat Width Appearance From The Face View = 1.531")		(("B" & "D") Louver Size Is 1.095" Wide x .36" Thick, Spaced At .36" Between Louvers)
Dimensional Specifications
"Solid" Louver Door		"Open" Louver Door
Minimum Door Width	7  1/2"	Minimum Door Width	7  1/2"
Minimum Door Height (See Step 4 Below For Hinge Boring Options)	7  1/2" For "NO" Hinge Boring 8 13/16" For "A" & "B" Hinge Boring 10" For "C" Hinge Boring	Minimum Door Height (See Step 4 Below For Hinge Boring Options)	7  1/2" For "NO" Hinge Boring 8 13/16" For "A" & "B" Hinge Boring 10" For "C" Hinge Boring
Center Panel Raise	N/A	Center Panel Raise	N/A
Inner Frame Edge	Design Specific (Cannot Be Changed)	Inner Frame Edge	Design Specific (Cannot Be Changed)
Outer Frame Edge	Options Available (Image Above Shows "Machine Edge")	Outer Frame Edge	Options Available (Image Above Shows "Machine Edge")
Grain Direction	N/A	Grain Direction	N/A
Outer Frame Width Specifications
"Solid" Louver Door		"Open" Louver Door
Stiles (Vertical Frame Pieces)	2  1/4" Default (Can Be Changed) IMPORTANT NOTE: (2  1/8" Minimum With Hinge Boring)	Stiles (Vertical Frame Pieces)	2  1/4" Default (Can Be Changed) IMPORTANT NOTE: (2  1/8" Minimum With Hinge Boring)
Rails (Horizontal Frame Pieces)	Varies - 2" Thru 2  13/16" On Visible Face Surface (Based On Overall Door Height)	Rails (Horizontal Frame Pieces)	Varies - 2  1/8" Thru 2  15/16" On Visible Face Surface (Based On Overall Door Height)
Mid-Rail Width	Equal To Top & Bottom Rail Widths**	Mid-Rail Width	Equal To Top & Bottom Rail Widths**
**Based On The Overall Height Of The Door, Sometimes The Midrail Width Cannot Be Exactly Equal To The Top & Bottom Rails. By Default, We Will Work To Match The Midrail Dimension ToThe Top & Bottom Rail Dimension.**

Select Your Wood Species
* Premium Grade Available  Click Here For More Information About Wood Species & Grades (Click Images Below For Grain Detail)
Alder	Birch, White*	Cherry*	Maple, Hard*
Hard Maple, Paint Grade	Hickory*	Oak, Red*	Oak, White*
Walnut*

Choose Your Framing Edge
The next step will address the framing edge choices for custom louvered doors.

Your Framing Edge Guide
B No hinge boring Rabbet 7/16" deep 3/8" high	B-2* Hinge boring okay	C No hinge boring Rabbet 7/16" deep 3/8" high	C-2 No hinge boring	CFP No hinge boring
CFP-2* Hinge boring okay	E-2 No hinge boring	FEP** Finished End Panel Rabbet 11/16" deep 3/16" high	FP No hinge boring	H No hinge boring Rabbet 7/16" deep 3/8" high
H-2* Hinge boring okay	J-2 No hinge boring	L-034* Hinge boring okay	L-059* Hinge boring okay	L-061 No hinge boring
L-297* Hinge boring okay Premium Edge Profile (+18.90)	L-149* Hinge boring okay	L-253 No hinge boring 5 degree back bevel	L-281* Hinge boring okay	L-120 No hinge boring
L-304 No hinge boring Premium Edge Profile (+18.90)	L-686 No hinge boring 5 degree back bevel	L-772 No hinge boring	L-803* Hinge boring okay	LC-2* Hinge boring okay
LC-Inset* Hinge boring okay Premium Edge Profile (+18.90)	Machine Edge* Hinge boring okay	PRS-2* Hinge boring okay	RC-2 No hinge boring	V-2 No hinge boring

* indicates edge profiles which can be bored for concealed hinges

Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.

Select Hinge Boring

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a Compact Style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call.

For FACE FRAME Style Cabinets

Compact Style Hinge "A" Boring For Compact Style Hinges Compact Hinge Bore With Dowel Inserts Select ("A" with) Placement Is 3" To Center From Top & Bottom Of Door Compact Hinge Bore Without Dowel Inserts Select ("A" without) Placement Is 3" To Center From Top & Bottom Of Door

Long Arm Style Hinges "B" Boring For Long Arm Style Hinges Long Arm Hinge Bore With Dowel Inserts Select ("B" with) Placement Is 3" To Center From Top & Bottom Of Door Long Arm Hinge Bore Without Dowel Inserts Select ("B" without) Placement Is 3" To Center From Top & Bottom Of Door

For FRAMELESS Style Cabinets Using Long Arm Hinges

Long Arm Style Hinges "C" Boring For Long Arm Style Hinges Long Arm Hinge Bore With Dowel Inserts Select ("C" with) Placement Is 3 3/4" To Center From Top & Bottom Of Door Long Arm Hinge Bore Without Dowel Inserts Select ("C" without) Placement Is 3 3/4" To Center From Top & Bottom Of Door Hinge Boring Standards Doors 8  13/16"h To 42"h Receive Two Bores Doors 42-1/16"h To 72"h Receive Three Bores Doors 72-1/16"h & Longer Receive Four Bores With Center Holes Set 25" In From Each End. *Custom Boring Locations (Vertically ONLY) Is Available At Additional Cost Per Door.  The Dimension From The Vertical Edge Cannot Be Changed As This Dimension Is Determined Specifically By The Hinge Type. (Contact Customer Service If You Need More Information - Read Line Below) (Select "Custom Boring (*Applicable Hinge Type)" In The Dropdown Menu) Dowel Inserts Are NOT Included With Any Door.  The Dowel Inserts Come With The Hinge Or Can Be Purchased Separately Hinge Boring Dimensional Specifications Bore Hole Is 35mm Diameter, 13.5mm Deep & The Insert Holes Are 8mm Diameter & 11.9mm Deep

Choose Your Other Options

Your "Other Options" Guide
Add Mid-Rail(s)
(click to enlarge)	Why Add a Mid-Rail? The addition of the midrails will assist in avoiding any door warpage or twist. Read the warranty size information below for additional details about your warrranty protection.
Back Side Routed Finger Pulls (priced per door)
(Click to enlarge)	Hand Pull Specifications: Hand pull routs are on the back side of the door and are minimally noticeable from a front view. Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL),    Top Right (TR) or Top Center (TC) Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide. Not available with the following edge profiles: E-2, FP, L-253, L-304, L-686, L-947 and RC-2.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

• Single panel up to 26" wide and 48" tall - 1/8"
• Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
• Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
• Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

**When ordering unfinished, doors should be properly prepared prior to applying any finishing products. Be sure to read and understand the instructions provided by your finish manufacturer. You may need to perform additional sanding to prepare your products for finishing.**

(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products