Applied Moulding Doors & Drawer Fronts
Item # 26940
Please Choose Or Scroll Down For More Info:
Starting at: $66.91 / Each
Custom Applied Molding Doors and Drawer Fronts
Select your applied molding doors or drawer fronts and wood specie below. These custom applied moulding doors will suit the most discriminating tastes..
Due to lumber and construction market conditions, lead time: 7-8 weeks for production
(All lead times are subject to variations in workload)
Just follow the steps below to select the options for your new doors.
Choose your Cabinet Door Style or Drawer Front Style
Click on any image to enlarge
(Minimum Width x Height Shown Under Profile Image)
Cornwall | Cotswald | ||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
CRP10797 | CRP10772 | ||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
CRP10A48 | Hancock | ||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
Discontinued |
LaSalle | ||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
Marquis | Discontinued |
||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
Newbury | Ridgemont | |||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
Royal | Saxony | ||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
TW101486 | TW101547 | ||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
TW10164 | Verona | ||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
(Drawing may vary from picture above, see specifications above) |
Versailles | ||||||||||||||||||
|
||||||||||||||||||
(Drawing may vary from picture above, see specifications above) |
Select Door or Drawer Front
Make a selection for whether you are ordering a cabinet door or the matching drawer front.
Default value is CABINET DOOR
Select Your Door Material
Alder | Alder, Knotty | Birch, White* | Cherry* |
Cherry, Rustic | Maple, Hard* | Maple, Hard Rustic | Maple, Soft |
Oak, Red* | Oak, Red, Qtr Sawn | Oak, Red, Rustic | Oak, White* |
Oak, White, Qtr Sawn | Paint Grade Hard Maple | Hickory* | Hickory, Rustic |
Pine, Knotty* | Walnut* | ||
* Premium Grade is available. Click here for more information about wood species and grades |
Choose Your Framing Edge
(For all drawer front styles)
B No hinge boring Rabbet 7/16" deep 3/8" high |
B-2* Hinge boring okay |
C No hinge boring Rabbet 7/16" deep 3/8" high |
C-2 No hinge boring |
CFP No hinge boring |
CFP-2* Hinge boring okay |
E-2 |
FEP** Finished End Panel Rabbet 11/16" deep 3/16" high |
FP No hinge boring |
H No hinge boring Rabbet 7/16" deep 3/8" high |
H-2* Hinge boring okay |
J-2 No hinge boring |
L-034* Hinge boring okay |
L-059* Hinge boring okay |
L-061 No hinge boring |
L-120 No hinge boring |
L-149* Hinge boring okay |
L-253 No hinge boring 5 degree back bevel |
L-281* Hinge boring okay |
L-297*² Hinge boring okay |
L-304² No hinge boring |
L-686 No hinge boring 5 degree back bevel |
L-772 No hinge boring |
L-803* Hinge boring okay |
LC-2* Hinge boring okay |
LC-Inset*² Hinge boring okay |
Machine Edge* Hinge boring okay |
PRS-2* Hinge boring okay |
RC-2 No hinge boring |
V-2 No hinge boring |
* indicates edge profiles which can be bored for concealed hinges
² indicates a premium edge which will result in additional charge per door
Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.
Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact. If you are seeking an exact match, contact us for a sample.
Hinge Boring Options
If you intend to use a concealed European style hinge, here are your boring options. We normally recommend a compact style hinge if you have "Face Frame" style cabinets. If you have any questions, just give us a call.
- Doors 9" to 42" receive two bores
- Doors 42-1/16" to 72" receive three bores
- Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
- Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
- Custom boring is available at additional cost per door (contact customer service)
- Dowel inserts are not included with any door. The dowel inserts come with the hinge or can be purchased separately.
For Face Frame Cabinets Using Compact Hinges | |
Compact Style Hinge for "A" boring |
|
Compact hinge bore with dowel inserts |
Compact hinge bore without dowel inserts Select ("A" without) Placement is 3" to center from top and bottom of door |
For Face Frame Cabinets Using Long Arm Hinges | |
Long Arm Style Hinge for "B" & "C" boring |
|
Long Arm hinge bore with dowel inserts Select ("B" with) Placement is 3" to center from top and bottom of door |
Long Arm hinge bore without dowel inserts Select ("B" without) Placement is 3" to center from top and bottom of door |
For Frameless Cabinets Using Long Arm Hinges | |
Long arm hinge bore pattern with dowel inserts Select ("C" with) Placement is 3-3/4" to center from top and bottom of door |
Long arm hinge bore pattern without dowel inserts Select ("C" without) Placement is 3-3/4" to center from top and bottom of door |
Optional Hand or Finger Pulls
Back Side Routed Finger Pulls (priced per door) |
|
(Click to enlarge) |
Hand Pull Specifications:
|
Product Warranty Information
Information about Conestoga product and finishing warranties.
Allowable tolerances for warpage and twist for five piece doors are:
- Up to 25-15/16" wide and 47-15/16" high - 1/8"
- Up to 25-15/16" wide and 48" to 64-15/16" high - 1/4"
- Up to 25-15/16" wide and 65" to 83-15/16" high - 5/16"
- Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.
Allowable tolerances for contraction, expansion and warpage for one and three piece products are:
- Up to 12" wide and 21-15/16" high - 1/8"
- 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
- Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
- All three piece products over 30" wide and 14" high are not warranted
Finishing Notes
When ordering unfinished, doors should be properly prepared prior to applying any finishing products. Be sure to read and understand the instructions provided by your finish manufacturer. You may need to perform additional sanding to prepare your products for finishing.
Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen. By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way. Your custom cabinet doors are available in a great selection of wood species which you will finish with your chosen stain, paint or finish.
If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer.
(Click on link or image above for measuring guide)
Special Handling Charges For Oversize Products
Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.
If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order. The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges. We Will Notify You Prior To Placing Your Order In Production.
FedEx Oversize Packages
Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” Packages. Oversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s). As of 2020, This Surcharge Will Be $120 Per Oversize Package.
Fedex Peak Oversize Package Surcharge
During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.
UPS Oversize Packages
A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s). As Of 2020, This Surcharge Will Be $115 Per Oversize Package.
Address Changes For FedEx & UPS
Both FedEx & UPS Charge For Address Changes & Corrections. The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019. Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct. The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.
If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.