Colourtones Painted 1-Piece Routed MDF Cabinet Doors & Drawer Fronts

Item # 26875


Please Choose Or Scroll Down For More Info:















Starting at: $48.39  / Each

Add to Cart:

Product Description

Painted 1-Piece Routed MDF Cabinet Doors
With Colourtones Fine Paint Finishes

Select Your Design & Your Framing Edge Profile & Have Them Shipped Painted, Ready To Install.
Your Price Will Be Calculated Based On Your Style Selection & Size

Finished Cabinet Doors & Drawer Fronts Are Finished With Color Coats & A Conversion Varnish Topcoat.
(See Finishing Specifications For Details)

Lead Time: 15-17 Work Days, Excluding Date Of Order
(All Lead Times Are Subject To Variations In Workload)



Select Your Door Style

1-Piece MDF Door Styles
PAY ATTENTION TO WIDTH & HEIGHT MINIMUMS TO PREVENT DELAYS IN PROCESSING
(**Cabinet Doors & Drawer Fronts Will Have A Minimum Size Charge Of 1 Square Foot**)

 

 

20RC Door Style

20RC Door Crosscut
Door Minimum Width: 7 5/8"
Door Minimum Height: 7 5/8"
Door Framing Width: 2 5/16"

20RC Drawer Front Crosscut
10RC DRAWER FRONT
Drawer Front Minimum Width: 7 5/8"
Drawer Front Minimum Height: 6"
Drawer Front Vertical Frame Width: 2 5/16"
Drawer Front Horizontal Frame Width: 1 3/16"

20RC

20SQ3 Door Style

20SQ3 Door Crosscut
Door Minimum Width: 7 5/8"
Door Minimum Height: 7 5/8"
Door Framing Width: 2 5/16"

20SQ3 Drawer Front Crosscut
10SQ3 DRAWER FRONT
Drawer Front Minimum Width: 7 7/8"
Drawer Front Minimum Height: 5 3/4"
Drawer Front Vertical Frame Width: 2 5/16"
Drawer Front Horizontal Frame Width: 1 1/4"

20SQ3

30RC Door Style

30RC Door Crosscut
Door Minimum Width: 7 5/8"
Door Minimum Height: 7 5/8"
Door Framing Width: 2 5/16"

30RC Drawer Front Crosscut
10RC DRAWER FRONT
Drawer Front Minimum Width: 7 5/8"
Drawer Front Minimum Height: 6"
Drawer Front Vertical Frame Width: 2 5/16"
Drawer Front Horizontal Frame Width: 1 3/16"

30RC

30SQ3 Door Style

30SQ3 Door Crosscut
Door Minimum Width: 7 5/8"
Door Minimum Height: 7 5/8"
Door Framing Width: 2 5/16"

30SQ3 Drawer Front Crosscut
10SQ3 DRAWER FRONT
Drawer Front Minimum Width: 7 7/8"
Drawer Front Minimum Height: 5 3/4"
Drawer Front Vertical Frame Width: 2 5/16"
Drawer Front Horizontal Frame Width: 1 1/4"

30SQ3


 

 

Select Your Finish Color

Your Colourtones Reference Guide

Cadet Grey

Canyon
Discontinued

Chesapeake

Ebony

Gunsmoke

Antique White

Arctic White

Designer White

Frosty White

Crystal White

Hearthstone

Heron

Marina

Metropolitan

Regent Blue


Choose Your Framing Edge
(For All Door Styles)
Select Your Framing Edge

Use this reference guide to find your framing edge (outer edge of the door).

  • CONCEALED HINGE BORING:  Note the available "Hinge Boring/Hinge Type" options for each profile.  Be sure to select the correct "Hinge Boring" option when placing doors in your cart. (see "Step 6:" for boring details)
  • INSET DOORS:  Inset doors fit INSIDE the cabinet opening.  Some profiles will not allow the door to operate correctly.  If your doors are "Inset" please select ONLY Frame Edges with the (²) designation.  These are the only Framing Edges available for inset applications.
Profiles With NO Hinge Boring Options
B Framing Edge
C Framing Edge
FP Framing Edge
H Framing Edge
L-061 Framing Edge
B
NO Hinge Boring
Not For Inset Doors
C
NO Hinge Boring
Not For Inset Doors
FP
NO Hinge Boring
Not For Inset Doors
H
NO Hinge Boring
Not For Inset Doors
L-061
NO Hinge Boring
​​​​​​​Not For Inset Doors
L-401 Framing Edge PRS Framing Edge Machine Edge w/ Rabbet Framing Edge
O Framing Edge
Round-2 Framing Edge
L-401
NO Hinge Boring
​​​​​​​Not For Inset Doors
PRS
NO Hinge Boring
​​​​​​​Not For Inset Doors
Machine Edge w/ Rabbet
NO Hinge Boring
​​​​​​​Not For Inset Doors
O
NO Hinge Boring
​​​​​​​Not For Inset Doors
Round-2
NO Hinge Boring
​​​​​​​Not For Inset Doors
Sophisticate Framing Edge V Framing Edge      
Sophisticate
NO Hinge Boring
​​​​​​​Not For Inset Doors
V
NO Hinge Boring
​​​​​​​Not For Inset Doors
     
Profiles With ALL Hinge Boring Options
B-2 Framing Edge LC-2 Framing Edge LC-Inset Framing Edge L-034 Framing Edge L-059 Framing Edge
B-2
"A", "B" & "C" Hinge Boring
​​​​​​​Not For Inset Doors
LC-2
"A", "B" & "C" Hinge Boring
​​​​​​​Not For Inset Doors
LC-Inset²
"A", "B" & "C" Hinge Boring
Inset Doors OK
L-034
"A", "B" & "C" Hinge Boring
​​​​​​​Not For Inset Doors
L-059
"A", "B" & "C" Hinge Boring
​​​​​​​Not For Inset Doors
L-149 Framing Edge L-785 Framing Edge L-803 Framing Edge L-966 Framing Edge L-977 Framing Edge
L-149²
"A", "B" & "C" Hinge Boring
Inset Doors OK
L-785
"A", "B" & "C" Hinge Boring
Not For Inset Doors
L-803
"A", "B" & "C" Hinge Boring
Not For Inset Doors
L-966
"A", "B" & "C" Hinge Boring
Not For Inset Doors
L-977
"A", "B" & "C" Hinge Boring
Not For Inset Doors
Machine Edge Framing Edge PRS-2 Framing Edge V-2 Framing Edge
 
 
Machine Edge
"A", "B" & "C" Hinge Boring
Not For Inset Doors
PRS-2
"A", "B" & "C" Hinge Boring
Not For Inset Doors
V-2
"A", "B" & "C" Hinge Boring
Not For Inset Doors
   
 Profiles With LIMITED Hinge Boring Options
C-2 Framing Edge
E-2 Framing Edge
H-2 Framing Edge
J-2 Framing Edge L-686 Framing Edge
C-2
"B" & "C" Hinge Boring Only
Not For Inset Doors
E-2
"B" & "C" Hinge Boring Only
Not For Inset Doors
H-2
"B" & "C" Hinge Boring Only
Not For Inset Doors
J-2
"B" & "C" Hinge Boring Only
Not For Inset Doors
L-686²
"B" & "C" Hinge Boring Only
5° back bevel
Inset Doors OK
L-1323 Framing Edge
 
 
 
L-1323²
"B" & "C" Hinge Boring Only
5° back bevel
Inset Doors OK
 
 
 
 

Some Edge Profiles Are NOT Recommended For Use With Euro, Demountable Or Inserta Style Hinges.  SEE HINGE BORING NOTES UNDER EACH PROFILE.

Edges Displayed Above Are Computer Generated To Represent The Actual product As Closely As Possible But May Not Be Exact. If You Are Seeking An Exact Match, Contact Us For A Sample.

 

Choose Your Hinge Boring

Select Hinge Boring
If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a Compact Style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 
For FACE FRAME Style Cabinets
Compact Style HingeCompact style hinge for Boring type "A"
"A" Boring For Compact Style Hinges
Hinge bore pattern for compact hinge with dowel inserts Hinge bore pattern for compact hinges without dowel inserts

Compact Hinge Bore With Dowel Inserts
Select ("A" with)
Placement Is 3" To Center From Top & Bottom Of Door

Compact Hinge Bore Without Dowel Inserts
Select ("A" without)
Placement Is 3" To Center From Top & Bottom Of Door
Long Arm Style HingesLong arm style hinge for hinge boring type "B" & "C"
"B" Boring For Long Arm Style Hinges
Hinge bore pattern for long arm hinge with dowel inserts for face frame cabinets Hinge bore pattern for long arm hinge without dowel inserts for face frame cabinets
Long Arm Hinge Bore With Dowel Inserts
Select ("B" with)
Placement Is 3" To Center From Top & Bottom Of Door

Long Arm Hinge Bore Without Dowel Inserts
Select ("B" without)
Placement Is 3" To Center From Top & Bottom Of Door

For FRAMELESS Style Cabinets Using Long Arm Hinges
Long Arm Style HingesLong arm style hinge for hinge boring type "B" & "C"
"C" Boring For Long Arm Style Hinges
Hinge bore pattern for long arm hinge with dowel insert holes Hinge bore pattern for long arm hinge without dowel insert holes
Long Arm Hinge Bore With Dowel Inserts
Select ("C" with)
Placement Is 3 3/4" To Center From Top & Bottom Of Door
Long Arm Hinge Bore Without Dowel Inserts
Select ("C" without)
Placement Is 3 3/4" To Center From Top & Bottom Of Door

Custom Boring Is Available At Additional Cost Per Door (Contact Customer Service)
Doors 9" To 42" Receive Two Bores
Doors 42-1/16" To 72" Receive Three Bores
Doors 72-1/16" & Longer Receive Four Bores With Center Holes Set 25" In From Each End.
Bore Hole Is 35mm Diameter, 13.5mm Deep & The Insert Holes Are 8mm Diameter & 11.9mm Deep
Dowel Inserts Are NOT Included With Any Door.  The Dowel Inserts Come With The Hinge Or Can Be Purchased Separately


Optional Hand or Finger Pulls

Optional Back Side Routed Hand/Finger Pulls
(Priced Per Door)
Fingerpull rout selections

Hand/Finger Pull Specifications:

  • Hand/Finger Pull Routs Are On The Back Side Of The Door & Are Minimally Noticeable From A Front View
  • Specify Location: Bottom Left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) Or Top Center (TC)
  • Rout Is 3-5/8" Wide & 3/8" Deep. When Specified As Right Or Left, The Rout Begins 3" From The Edge Of The Door
  • Rout Is Centered On Doors Less Than 10" Wide
  • Routing Not Available With The Following Edge Profiles:  (E-2), (FP), (L-253), (L-304), (L-686), (L-947) & (RC-2)
  • Adds One Additional Day To Lead Time.


Need A Mid-Rail?
Adding A Mid-Rail Is Meant To Offer Additional Support To An Oversized Door, Drawer Front Or Panel, Which Will Help To Mitigate Door Warpage Due To The Overall Dimensions Of The Door, Drawer Front Or Panel.
(See "Manufacturer's Product Warranty Information" Below For Acceptable Warpage Tolerances)
Horizontal Mid-Rails
Single Horizontal Mid-Rail

We Recommend Adding A SINGLE HORIZONTAL MID-RAIL When The Door/Panel Is Between 48" & 60" Tall

And A DOUBLE HORIZONTAL MID-RAIL When The Door/Panel Is Between 60" & 96" Tall

Doors Shorter Than 48" Do Not Typically Require A Mid-Rail.  You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.

Double Horizontal Mid-Rail
Vertical Mid-Rails
Doors
Single Vertical Mid-Rail

We Recommend Adding A SINGLE VERTICAL MID-RAIL When The Door Is Between 24" & 36" Wide

We Recommend Adding A DOUBLE VERTICAL MID-RAIL When The Door Is Greater Than 36" Wide

Doors Narrower Than 24" Do Not Typically Require A Mid-Rail.  You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.

Double Vertical Mid-Rail
Drawer Fronts

Typically, Drawer Fronts Will Not Require A Mid-Rail.  However, On Larger/Oversized Drawer Fronts, It Is Good Practice To Use A Mid-Rail When The Drawer Box Is Less Than Or Equal To 1/2 The Height Of The Drawer Front.

You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.

Information about Conestoga product and finishing warranties.

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

Measuring for new or replacement cabinet doors and drawers
(Click on link or image above for measuring guide)

Warranty Information
Special note about door sizing:

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

  • Single panel up to 26" wide and 48" tall - 1/8"
  • Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
  • Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
  • Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
  • Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

  • Up to 12" wide and 21-15/16" high - 1/8"
  • 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
  • Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
  • All three piece products over 30" wide and 14" high are not warranted

We warrant that all of our products are free from defects in material and workmanship for a period of one year from the date of shipment. Natural characteristics found in wood will not be considered defects. Wood will expand and contract in accordance with its environment. Please call for specific warranty information. Photography on this site is for illustration purposes only. Actual wood color and finish may vary slightly due to the electronic rendering process. For accurate color selection, we recommend that you obtain a product sample. Conestoga Wood Specialties reserves the right to change or modify our products as part of its ongoing product development.

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” PackagesOversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.