Painted Custom Designed MDF Cabinet Doors
With Colourtones Fine Paint Finishes

DUE TO LUMBER AND CONSTRUCTION MARKET CONDITIONS, LEAD TIME APPROX 4-5 WEEKS--SUBJECT TO WORKLOAD VARIATIONS

Select Your Style & Your Profile Details & Have Them Shipped Painted, Ready To Install.
Your Price Will Be Calculated Based On Your Style Selection & Size

Cabinet Doors & Drawer Fronts Are Finished With Color Coats & A Conversion Varnish Topcoat.
(See Finishing Specifications For Details)

Lead Time: 15-17 Work Days, Excluding Date Of Order
(All Lead Times Are Subject To Variations In Workload)

Choose Your Door Design & Style

Custom Door Designs
1-Piece Style	5-Piece Styles
Slab Style	Square Style	Arch Style	Cathedral Style

Choose Your Finish Color

Your Colourtones Reference Guide
Cadet Grey	Canyon Discontinued	Chesapeake	Ebony	Gunsmoke
Antique White	Arctic White	Designer White	Frosty White	Crystal White
Hearthstone	Heron	Marina	Metropolitan	Regent Blue

Choose Your "Framing Edge"
Pay Close Attention To Notes About Hinge Boring Restrictions

Select Your Framing Edge
Use this reference guide to find your framing edge (outer edge of the door). Also note the available "Hinge Boring/Hinge Type" options for each profile.  Be sure to select the correct "Hinge Boring" option when placing doors in your cart. (see "Step 6:" for boring details)
	Profiles With NO Hinge Boring Options B NO Hinge Boring Rabbet 7/16" Deep - 3/8" High Bullnose NO Hinge Boring C NO Hinge Boring Rabbet 7/16" Deep - 3/8" High CFP NO Hinge Boring E NO Hinge Boring Rabbet 7/16" Deep - 3/8" High FP NO Hinge Boring H NO Hinge Boring Rabbet 7/16" Deep - 3/8" High L-021 NO Hinge Boring L-058 NO Hinge Boring L-061 NO Hinge Boring L-120 NO Hinge Boring L-151 NO Hinge Boring L-392 NO Hinge Boring L-401 NO Hinge Boring L-534 NO Hinge Boring L-772 NO Hinge Boring L-780 NO Hinge Boring L-904 NO Hinge Boring L-946 NO Hinge Boring L-991 NO Hinge Boring L-1120 NO Hinge Boring 5º Back Bevel Machine Edge w/ Rabbet NO Hinge Boring Rabbet 7/16" Deep - 3/8" High O NO Hinge Boring PRS NO Hinge Boring Rabbet 7/16" Deep - 3/8" High Round-2 NO Hinge Boring       Sophisticate NO Hinge Boring V NO Hinge Boring Rabbet 7/16" Deep - 3/8" High
Profiles With ALL Hinge Boring Options CFP-2 "A", "B" & "C" Hinge Boring L-034 "A", "B" & "C" Hinge Boring L-059 "A", "B" & "C" Hinge Boring PRS-2 "A", "B" & "C" Hinge Boring LC-2 "A", "B" & "C" Hinge Boring   L-281 "A", "B" & "C" Hinge Boring L-149 "A", "B" & "C" Hinge Boring LC-Inset "A", "B" & "C" Hinge Boring V-2 "A", "B" & "C" Hinge Boring B-2 "A", "B" & "C" Hinge Boring            Machine Edge "A", "B" & "C" Hinge Boring L-1201 "A", "B" & "C" Hinge Boring L-109 "A", "B" & "C" Hinge Boring L-171 "A", "B" & "C" Hinge Boring L-297 "A", "B" & "C" Hinge Boring L-180 "A", "B" & "C" Hinge Boring L-382 "A", "B" & "C" Hinge Boring L-443 "A", "B" & "C" Hinge Boring L-538 "A", "B" & "C" Hinge Boring L-631 "A", "B" & "C" Hinge Boring L-687 "A", "B" & "C" Hinge Boring L-723 "A", "B" & "C" Hinge Boring L-746 "A", "B" & "C" Hinge Boring L-770 "A", "B" & "C" Hinge Boring L-785 "A", "B" & "C" Hinge Boring L-787 "A", "B" & "C" Hinge Boring L-803 "A", "B" & "C" Hinge Boring L-850 "A", "B" & "C" Hinge Boring L-894 "A", "B" & "C" Hinge Boring L-966 "A", "B" & "C" Hinge Boring L-967 "A", "B" & "C" Hinge Boring 5º Back Bevel L-977 "A", "B" & "C" Hinge Boring L-978 "A", "B" & "C" Hinge Boring L-996 "A", "B" & "C" Hinge Boring 5º Back Bevel L-997 "A", "B" & "C" Hinge Boring L-1003 "A", "B" & "C" Hinge Boring L-1057 "A", "B" & "C" Hinge Boring L-1099 "A", "B" & "C" Hinge Boring L-1117 "A", "B" & "C" Hinge Boring 5º Back Bevel L-1160 "A", "B" & "C" Hinge Boring     L-1169 "A", "B" & "C" Hinge Boring L-1194 "A", "B" & "C" Hinge Boring 5º Back Bevel L-981 "A", "B" & "C" Hinge Boring
Profiles With LIMITED Hinge Boring Options C-2 "B" & "C" Hinge Boring Only E-2 "B" & "C" Hinge Boring Only 5º Back Bevel H-2 "B" & "C" Hinge Boring Only 5º Back Bevel J-2 "B" & "C" Hinge Boring Only L-253 "B" & "C" Hinge Boring Only 5º Back Bevel   L-304 "B" & "C" Hinge Boring Only 5º Back Bevel L-686 "B" & "C" Hinge Boring Only 5º Back Bevel L-947 "B" & "C" Hinge Boring Only 5º Back Bevel L-1323 "B" & "C" Hinge Boring Only 5º Back Bevel
Some Edge Profiles Are NOT Recommended For Use With Euro, Demountable Or Inserta Style Hinges.  SEE HINGE BORING NOTES UNDER EACH PROFILE. Edges Displayed Above Are Computer Generated To Represent The Actual product As Closely As Possible But May Not Be Exact. If You Are Seeking An Exact Match, Contact Us For A Sample.

Choose Your "Framing Bead"
Pay Close Attention To Notes About Door Styles

MDF Framing Beads
Use This Reference Guide To Find Your "Framing Bead" (Inner Edge Of The Door Frame). For SLAB Style Doors, You Will Select ONLY "Slab" In The "Framing Bead" Dropdown. "SLAB" STYLE DOES NOT HAVE A "FRAMING BEAD".
	Profiles For ALL 5-Piece Styles Elite F-007 F-877 F-1223 Ogee       Regular Square        Additional Profiles For Square Style ONLY     F-472 F-722 Reverse G-Cove, P-112, P-116 Or P-240 "Center Panel" ONLY F-1140
Edges Displayed Above Are Computer Generated To Represent The Actual product As Closely As Possible But May Not Be Exact. If You Are Seeking An Exact Match, Contact Us For A Sample.

Choose Your "Center Panel"
Pay Close Attention To Notes About Door Styles

MDF Center Panels
Use This Reference Guide To Find Your "Center Panel" (Center Panel Of The Door). For SLAB Style Doors, You Will Select ONLY "Slab" In The "Center Panel" Dropdown. "SLAB" STYLE DOES NOT HAVE A "CENTER PANEL".
	Profiles For ALL 5-Piece Styles G-Cove Louis Xlll M-Bead P-057 (Flat) P-125 Short Presidential P-139 P-225 P-420 P-456 P-602 Presidential Raise Reverse G-Cove RM-Raise Slant U-Cove  Additional Profiles For Square Style ONLY     P-259 P-369 P-704
Edges Displayed Above Are Computer Generated To Represent The Actual product As Closely As Possible But May Not Be Exact. If You Are Seeking An Exact Match, Contact Us For A Sample.

Choose Your Hinge Boring

Select Hinge Boring

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a Compact Style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call.

For FACE FRAME Style Cabinets

Compact Style Hinge "A" Boring For Compact Style Hinges Compact Hinge Bore With Dowel Inserts Select ("A" with) Placement Is 3" To Center From Top & Bottom Of Door Compact Hinge Bore Without Dowel Inserts Select ("A" without) Placement Is 3" To Center From Top & Bottom Of Door

Long Arm Style Hinges "B" Boring For Long Arm Style Hinges Long Arm Hinge Bore With Dowel Inserts Select ("B" with) Placement Is 3" To Center From Top & Bottom Of Door Long Arm Hinge Bore Without Dowel Inserts Select ("B" without) Placement Is 3" To Center From Top & Bottom Of Door

For FRAMELESS Style Cabinets Using Long Arm Hinges

Long Arm Style Hinges "C" Boring For Long Arm Style Hinges Long Arm Hinge Bore With Dowel Inserts Select ("C" with) Placement Is 3 3/4" To Center From Top & Bottom Of Door Long Arm Hinge Bore Without Dowel Inserts Select ("C" without) Placement Is 3 3/4" To Center From Top & Bottom Of Door Hinge Boring Standards Doors 8  13/16"h To 42"h Receive Two Bores Doors 42-1/16"h To 72"h Receive Three Bores Doors 72-1/16"h & Longer Receive Four Bores With Center Holes Set 25" In From Each End. *Custom Boring Locations (Vertically ONLY) Is Available At Additional Cost Per Door.  The Dimension From The Vertical Edge Cannot Be Changed As This Dimension Is Determined Specifically By The Hinge Type. (Contact Customer Service If You Need More Information - Read Line Below) (Select "Custom Boring (*Applicable Hinge Type)" In The Dropdown Menu) Dowel Inserts Are NOT Included With Any Door.  The Dowel Inserts Come With The Hinge Or Can Be Purchased Separately Hinge Boring Dimensional Specifications Bore Hole Is 35mm Diameter, 13.5mm Deep & The Insert Holes Are 8mm Diameter & 11.9mm Deep

Optional Hand or Finger Pulls

Optional Back Side Routed Hand/Finger Pulls (Priced Per Door)

Hand/Finger Pull Specifications: Hand/Finger Pull Routs Are On The Back Side Of The Door & Are Minimally Noticeable From A Front View Specify Location: Bottom Left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) Or Top Center (TC) Rout Is 3-5/8" Wide & 3/8" Deep. When Specified As Right Or Left, The Rout Begins 3" From The Edge Of The Door Rout Is Centered On Doors Less Than 10" Wide Routing Not Available With The Following Edge Profiles:  (E-2), (FP), (L-253), (L-304), (L-686), (L-947) & (RC-2) Adds One Additional Day To Lead Time.

Need A Mid-Rail?
Adding A Mid-Rail Is Meant To Offer Additional Support To An Oversized Door, Drawer Front Or Panel, Which Will Help To Mitigate Door Warpage Due To The Overall Dimensions Of The Door, Drawer Front Or Panel. (See "Manufacturer's Product Warranty Information" Below For Acceptable Warpage Tolerances)
Horizontal Mid-Rails
Single Horizontal Mid-Rail	We Recommend Adding A SINGLE HORIZONTAL MID-RAIL When The Door/Panel Is Between 48" & 60" Tall And A DOUBLE HORIZONTAL MID-RAIL When The Door/Panel Is Between 60" & 96" Tall Doors Shorter Than 48" Do Not Typically Require A Mid-Rail.  You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.	Double Horizontal Mid-Rail
Vertical Mid-Rails
Doors
Single Vertical Mid-Rail	We Recommend Adding A SINGLE VERTICAL MID-RAIL When The Door Is Between 24" & 36" Wide We Recommend Adding A DOUBLE VERTICAL MID-RAIL When The Door Is Greater Than 36" Wide Doors Narrower Than 24" Do Not Typically Require A Mid-Rail.  You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.	Double Vertical Mid-Rail
Drawer Fronts
Typically, Drawer Fronts Will Not Require A Mid-Rail.  However, On Larger/Oversized Drawer Fronts, It Is Good Practice To Use A Mid-Rail When The Drawer Box Is Less Than Or Equal To 1/2 The Height Of The Drawer Front. You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.

Product Warranty Information

Information About Conestoga Product & Finishing Warranties

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

(Click on link or image above for measuring guide)

Warranty Information

Special notes about door sizing:

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

• Single panel up to 26" wide and 48" tall - 1/8"
• Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
• Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
• Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

We warrant that all of our products are free from defects in material and workmanship for a period of one year from the date of shipment. Natural characteristics found in wood will not be considered defects. Wood will expand and contract in accordance with its environment. Please call for specific warranty information. Photography on this site is for illustration purposes only. Actual wood color and finish may vary slightly due to the electronic rendering process. For accurate color selection, we recommend that you obtain a product sample. Conestoga Wood Specialties reserves the right to change or modify our products as part of its ongoing product development.

Special Packaging/Handling/Shipping Charges For Oversize Products