Custom Solid Wood Drawer With Sliding Cutlery Insert

Increase Your Storage Efficiency With A New Solid Wood Drawer And Sliding Cutlery Divider Kit

Allow 12 - 13 work days lead time for most orders

General Information Includes Outer Drawer Box & Sliding Cutlery Divider ONLY - Drawer Slides Are NOT Included Order OUTER DRAWER BOX Dimensions - NOT Sliding Divider Dimensions (Click Here For How To Measure And Size Your Drawer Box) Sliding Cutlery Divider Is Automatically Sized Based On Outer Drawer Box Dimensions Minimum Outer Drawer Box Height Is 4" Sliding Cutlery Divider Will Be 1-5/16" Smaller In Width & Depth (Front To Back) Than Outer Drawer Box Width & Depth (Front To Back) Depth (Front To Back) Available Between 16" & 22".  Refer To Specific Design For Width Range. Drawer Boxes And Sliding Cutlery Dividers Are Available In Natural Birch & Hard Maple Outer Drawer Boxes Are 5/8" Thick Solid Wood Sides With A 1/4" Thick Matching Plywood Bottom Panel Inner Sliding Cutlery Divider Is 3/8" Thick Solid Wood Sides With A 1/4" Thick Matching Plywood Bottom Panel ALL Sliding Cutlery Dividers Are 1 5/8" Overall Height (Including 1/4" Thick Bottom Panel) Recommended Maximum Drawer Box Width Is 24" To Ensure Proper Operation (Drawer Boxes Wider Than 24" Are NOT Covered By Warranty) Ordering Information Please Stay Within The Specified Sliding Cutlery Divider Width Ranges, Shown At The "Sliding Cutlery Divider Options" Table, To Avoid Delays In Processing Your Order Specify The Design Of Sliding Cutlery Divider And Wood Specie (Example: A - Nat Birch, B - Hard Maple, etc...) Order OUTER DRAWER BOX Dimensions - NOT Sliding Divider Dimensions (Click Here For How To Measure And Size Your Drawer Box) Outer Drawer Boxes Are Available In Height Increments Of 1/2" Only.  Standard Drawer Height Is 4".  Taller Sizes Available At Additional Charge Specify Drawer Box Depth (Front To Back) & Width In 1/16" Increments.  Both Dimensions Are Measured From Outside Edge To Outside Edge

Quikdrawers 5/8" Solid Birch Or Natural Hard Maple Drawer Box Program Designed For Any Drawer Or Pullout/Rollout Shelf Need. These Pre-Finished Drawer Boxes Can Be Ordered With A Variety Of Options, Just Scroll Down This Page For More Information. 

How To Measure (Use outside dimensions)
Sizing Drawer For Use With Concealed Undermount Slides	Sizing Drawer For Use With Side Mounted, Full Extension, Ball Bearing Slides	Sizing Drawer For Use With Side Mounted, Partial Extension, Euro Style Slides
Sizing The Depth For New Or Replacement Drawer
(click image to open in new window)

Drawer Box & Rollout Shelf Construction

Our Drawer boxes are constructed with 5/8" thick pre-finished solid wood sides, dovetail joints on all four corners and a standard matching 1/4" thick B-3 grade plywood bottom.  1/2" bottoms are available as an upgrade.  Birch drawers will receive Birch veneer plywood bottoms and Hard Maple drawers will receive Maple veneer plywood bottoms.  Solid wood staves (wood strips) are stacked and used on ALL materials to acheive finished drawer heights.  All material used is of Standard Grade and will consist of natural colors of the species selected.  Mineral, color and grain variation is allowed and some finger joints may be visible (on top/bottom edge only).

Some companies will tell you that dovetail joints, solid wood and a UV clear coat finish is not important...  That's because they can't offer it, especially at these prices!

All bottoms are recessed 1/2" and all sides have 1/16" eased edges.  Drawer boxes are shipped pre-assembled.  Notching for undermount slides is available (release clips are not supplied unless ordered with our Vitus Under-mount slide).  We strongly recommend a 1/2" thick bottom if your drawer box or rollout shelf is 24" or wider.

Drawer Bottoms Are Inserted Into Dado Groove For Strength
Standard bottom recess on all drawers will allow for use with modern undermount, concealed slides	Dado inset bottom for superior strength and load bearing capacity

---

Every drawer and rollout is branded... your guarantee of quality! (OEM and trade customers only may request "No Logo")
White Birch Drawer	Natural Hard Maple Drawer

Optional Undermount Notching

Optional undermount notching is based on standard manufacturers requirements (1-1/2" wide) and is only available as shown below. (Selecting this option above does not include the slide)  We do NOT offer or perform custom notching or boring.

Rear notching for Undermount Concealed Slides (no changes allowed)

Rear notching Specifications (no alterations)

(Click to enlarge)

Choosing Drawer Slides for Your Drawer

If you are also changing drawer slides or adding a new drawer and you need some information about choosing drawer slides or how to size your drawer for your drawer slides, click on this link: Choosing drawer slides for your new or replacement drawer box 

Optional Drawer Front Screws

You may choose to include the optional screws for attaching your drawer front to your drawer.  If you do, please read the Drawer Front Screw webpage for important information.  We do NOT drill the holes in the drawer for your drawer front screws.

QuikDrawers Limited Lifetime Warranty

QuikDrawers Lifetime warranty is for defects in materials and craftsmanship for the original purchaser.  This limited lifetime warranty for QuikDrawers custom drawers has specific conditions and exclusions.  Please see Warranty Information page for details.

If you have questions about these options or specifications, just give us a call at

1-866-937-7429 (Mon-Fri 8am - 4pm, central time)

*Some conditions apply.  Drawers may not be combined with other items for free shipping.  Products purchased along with drawers will be charged appropriate shipping for those items.  Contact Sales for other details.  Read shipping guidelines.