QD10RC3 - Unfinished MDF

Item #28774

Please Choose Or Scroll Down For More Info:












Starting at: $25.13 / Each

Add to Cart:
Product Description

Due to lumber and construction market conditions, lead time:  3-5 weeks for production
(All lead times are subject to variations in workload)

Cabinet Doors & Drawer Fronts Are Made From 3/4" Thick MDF

Our MDF Cabinet Doors & Drawer Fronts Can Also Be Shipped Painted!

QD10RC3
10RC3
Door Specifications
Minimum Door Width 7 11/16"
Minimum Door Height
(See Step 2 Below For Hinge Boring Options)		 7 11/16" For "NO" Hinge Boring
8 13/16" For "A" & "B" Hinge Boring
10" For "C" Hinge Boring
Center Panel Raise Design Specific
Inner Frame Edge Design Specific
Outer Frame Edge Options Available (See Step 1 Below) - *Machine Edge Shown*
Framing Widths 2" - Vertical (Stiles) & Horizontal (Rails)
Mid-Rail Width 1 3/4"
Grain Direction N/A
Drawer Front Specifications
Minimum Drawer Front Width 7 11/16"
Minimum Drawer Front Height 5 15/16"
Center Panel Raise  Design Specific
Inner Frame Edge Design Specific
Outer Frame Edge Options Available (See Step 1 Below) - *Machine Edge Shown*
Framing Width 2" Vertical (Stiles) - 3/4" Horizontal (Rails)
Mid-Rail Width Mid-Rail Not Available
Grain Direction N/A
Construction Cross-Section Images
Door & Drawer Front Cross-Section
(Click Image For Dimensional Specs)
10RC3 Crosscut

Select Your Framing Edge

Use this reference guide to find your framing edge (outer edge of the door).

  • CONCEALED HINGE BORING:  Note the available "Hinge Boring/Hinge Type" options for each profile.  Be sure to select the correct "Hinge Boring" option when placing doors in your cart. (see "Step 6:" for boring details)
  • INSET DOORS:  Inset doors fit INSIDE the cabinet opening.  Some profiles will not allow the door to operate correctly.  If your doors are "Inset" please select ONLY Frame Edges with the (²) designation.  These are the only Framing Edges available for inset applications.
Profiles With NO Hinge Boring Options
B Framing Edge
C Framing Edge
 FP Framing Edge
H Framing Edge
L-061 Framing Edge
B
NO Hinge Boring
Not For Inset Doors
C
NO Hinge Boring
Not For Inset Doors
 FP
NO Hinge Boring
Not For Inset Doors
H
NO Hinge Boring
Not For Inset Doors
L-061
NO Hinge Boring
Not For Inset Doors
L-401 Framing Edge PRS Framing Edge Machine Edge w/ Rabbet Framing Edge
O Framing Edge
 Round-2 Framing Edge
L-401
NO Hinge Boring
Not For Inset Doors
PRS
NO Hinge Boring
Not For Inset Doors
Machine Edge w/ Rabbet
NO Hinge Boring
Not For Inset Doors
O
NO Hinge Boring
Not For Inset Doors
 Round-2
NO Hinge Boring
Not For Inset Doors
Sophisticate Framing Edge V Framing Edge LC-Inset Framing Edge    
Sophisticate
NO Hinge Boring
Not For Inset Doors		 V
NO Hinge Boring
Not For Inset Doors		 L-180
NO Hinge Boring
Not For Inset Doors		    
Profiles With ALL Hinge Boring Options
B-2 Framing Edge LC-2 Framing Edge LC-Inset Framing Edge L-034 Framing Edge L-059 Framing Edge
B-2
"A", "B" & "C" Hinge Boring
​​​​​​​Not For Inset Doors
LC-2
"A", "B" & "C" Hinge Boring
​​​​​​​Not For Inset Doors
LC-Inset²
"A", "B" & "C" Hinge Boring
Inset Doors OK
L-034
"A", "B" & "C" Hinge Boring
​​​​​​​Not For Inset Doors
L-059
"A", "B" & "C" Hinge Boring
​​​​​​​Not For Inset Doors
L-149 Framing Edge L-785 Framing Edge L-803 Framing Edge L-966 Framing Edge L-977 Framing Edge
L-149²
"A", "B" & "C" Hinge Boring
Inset Doors OK
L-785
"A", "B" & "C" Hinge Boring
Not For Inset Doors
L-803
"A", "B" & "C" Hinge Boring
Not For Inset Doors
L-966
"A", "B" & "C" Hinge Boring
Not For Inset Doors
L-977
"A", "B" & "C" Hinge Boring
Not For Inset Doors
Machine Edge Framing Edge PRS-2 Framing Edge V-2 Framing Edge L-297 Framing Edge  
Machine Edge
"A", "B" & "C" Hinge Boring
Not For Inset Doors
PRS-2
"A", "B" & "C" Hinge Boring
Not For Inset Doors
V-2
"A", "B" & "C" Hinge Boring
Not For Inset Doors
 L-297
"A", "B" & "C" Hinge Boring
Not For Inset Doors		  
 Profiles With LIMITED Hinge Boring Options
C-2 Framing Edge
 E-2 Framing Edge
H-2 Framing Edge
 J-2 Framing Edge L-686 Framing Edge
C-2
"B" & "C" Hinge Boring Only
Not For Inset Doors
E-2
"B" & "C" Hinge Boring Only
Not For Inset Doors
H-2
"B" & "C" Hinge Boring Only
Not For Inset Doors
 J-2
"B" & "C" Hinge Boring Only
Not For Inset Doors
L-686²
"B" & "C" Hinge Boring Only
5° back bevel
Inset Doors OK
L-1323 Framing Edge
  
 
 
L-1323²
"B" & "C" Hinge Boring Only
5° back bevel
Inset Doors OK
  
 
 
 

Some Edge Profiles Are NOT Recommended For Use With Euro, Demountable Or Inserta Style Hinges.  SEE HINGE BORING NOTES UNDER EACH PROFILE.

Edges Displayed Above Are Computer Generated To Represent The Actual product As Closely As Possible But May Not Be Exact. If You Are Seeking An Exact Match, Contact Us For A Sample.

Select Hinge Boring
If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a Compact Style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 
For FACE FRAME Style Cabinets
Compact Style HingeCompact style hinge for Boring type "A"
"A" Boring For Compact Style Hinges
Hinge bore pattern for compact hinge with dowel inserts
Hinge bore pattern for compact hinges without dowel inserts
Compact Hinge Bore With Dowel Inserts
Select ("A" with)
Placement Is 3" To Center From Top & Bottom Of Door
Compact Hinge Bore Without Dowel Inserts
Select ("A" without)
Placement Is 3" To Center From Top & Bottom Of Door
Long Arm Style HingesLong arm style hinge for hinge boring type "B" & "C"
"B" Boring For Long Arm Style Hinges
Hinge bore pattern for long arm hinge with dowel inserts for face frame cabinets
Hinge bore pattern for long arm hinge without dowel inserts for face frame cabinets
Long Arm Hinge Bore With Dowel Inserts
Select ("B" with)
Placement Is 3" To Center From Top & Bottom Of Door
Long Arm Hinge Bore Without Dowel Inserts
Select ("B" without)
Placement Is 3" To Center From Top & Bottom Of Door
For FRAMELESS Style Cabinets Using Long Arm Hinges
Long Arm Style HingesLong arm style hinge for hinge boring type "B" & "C"
"C" Boring For Long Arm Style Hinges
Hinge bore pattern for long arm hinge with dowel insert holes
Hinge bore pattern for long arm hinge without dowel insert holes
Long Arm Hinge Bore With Dowel Inserts
Select ("C" with)
Placement Is 3 3/4" To Center From Top & Bottom Of Door
Long Arm Hinge Bore Without Dowel Inserts
Select ("C" without)
Placement Is 3 3/4" To Center From Top & Bottom Of Door
Hinge Boring Standards
Doors 8  13/16"h To 42"h Receive Two Bores
Doors 42-1/16"h To 72"h Receive Three Bores
Doors 72-1/16"h & Longer Receive Four Bores With Center Holes Set 25" In From Each End.

*Custom Boring Locations (Vertically ONLY) Is Available At Additional Cost Per Door.  The Dimension From The Vertical Edge Cannot Be Changed As This Dimension Is Determined Specifically By The Hinge Type.
(Contact Customer Service If You Need More Information - Read Line Below)
(Select "Custom Boring (*Applicable Hinge Type)" In The Dropdown Menu)

Dowel Inserts Are NOT Included With Any Door.  The Dowel Inserts Come With The Hinge Or Can Be Purchased Separately
Hinge Boring Dimensional Specifications
Bore Hole Is 35mm Diameter, 13.5mm Deep & The Insert Holes Are 8mm Diameter & 11.9mm Deep


Optional Back Side Routed Hand/Finger Pulls
(Priced Per Door)
Fingerpull rout selections

Hand/Finger Pull Specifications:

  • Hand/Finger Pull Routs Are On The Back Side Of The Door & Are Minimally Noticeable From A Front View
  • Specify Location: Bottom Left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) Or Top Center (TC)
  • Rout Is 3-5/8" Wide & 3/8" Deep. When Specified As Right Or Left, The Rout Begins 3" From The Edge Of The Door
  • Rout Is Centered On Doors Less Than 10" Wide
  • Routing Not Available With The Following Edge Profiles:  (E-2), (FP), (L-253), (L-304), (L-686), (L-947) & (RC-2)
  • Adds One Additional Day To Lead Time.


Enter Your Dimensions
Use The Dropdowns To Input Your Door Or Drawer Front, Height & Width Dimensions.
See Item Specifications For Minimum Dimension Requirements.
Be Sure To Input Your FINISHED Dimensions.  The Dimensions You Provide Will Be The Final/Finished Size.

Measuring for new or replacement cabinet doors and drawers
(Click On The Image Above For Measuring Guide)


Review Manufacturer's Warranty/Tolerances & Exception Charges
Warranty
Information About Manufacturer's Product & Finishing Warranties
Manufacturer's Allowable Tolerances

Allowable Tolerances For Bow, Warp Or Twist For "Single Panel", "Multi-Panel", "Frame Only" & Mullion Doors Are As Follows:

Single Panel Up To 26" Wide And/Or 48" Tall - 1/8" Acceptable
Multi-Panel Up To 26" Wide & 48-1/16" To 64-15/16" Tall - 1/4" Acceptable
Multi-Panel Up To 26" Wide & 65" To 83-15/16" Tall - 5/16" Acceptable
Single Panel, Single Opening "Frame Only" & "Mullion" Doors Over 26" Wide And/Or 48" Tall Will NOT Be Warranted ("Mullion Lites" Not To Be Included In Panel Count)
Any Door Exceeding 25-15/16" Wide Or 83-15/16" High Will NOT Be Warranted

Allowable Tolerances For Contraction, Expansion & Warpage For One & Three Piece Products Are As Follows:

Up To 12" Wide & 21-15/16" High - 1/8" Acceptable
12-1/16" To 22" Wide Or 22" To 43-15/16" High - 1/4" Acceptable
Any One Piece Product Exceeding 22" Wide Or 43-15/16" High Will NOT Be Warranted
All Three Piece Products Over 30" Wide & 14" High Are NOT Warranted

Finishing Notes

When Ordering Unfinished, Doors Should Be Properly Prepared Prior To Applying Any Finishing Products.  Be Sure To Read & Understand The Instructions Provided By Your Finish Manufacturer.  You May Need To Perform Additional Sanding To Prepare Your Products For Finishing.
Special Handling Charges For Oversized Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” Packages. Oversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx) Any Package Shipped Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019, But Can Be Upwards Of $800.00 Or More.
Please Check Your Shipping Address On Your Order Confirmation To Ensure That It Is Correct.
The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.