Custom Mullion Doors - MDF Unfinished

Whether you are looking for classic clean designs of single or multi-lite mullion doors, these Conestoga custom mullion doors will suit the most discriminating tastes.

Due to lumber and construction market conditions, lead time:  7-8 weeks for production
(All lead times are subject to variations in workload)

Just follow the steps below to select the options for your new doors.

Design your Cabinet Doors

Choose The Shape Of Your Mullion Doors
CRP-10	CRP-20		CRP-30
Choose The Lite Arrangement Or Style Of Your Mullion Doors (All lites evenly spaced.  Clear glass retainer moulding supplied with all doors.  Glass is not included.)
M1	M4	M6	M8
Minimum W x H 7-7/8" x 7-7/8" See Special Notes	Minimum W x H 7-7/8" x 7-7/8"	Minimum W x H 7-7/8" x 11-7/8"	Minimum W x H 7-7/8" x 14-7/8"
M10	M12	*M9 Offset (CRP10 frame only)	*M11 Offset (CRP10 frame only)
Minimum W x H 7-7/8" x 19-7/8"	Minimum W x H 11-7/8" x 17-7/8"	Minimum W x H 11-7/8" x 11-7/8"	Minimum W x H 11-7/8" x 14-5/8"
Odyssey
Minimum W x H 14-7/8" x 11-3/8" (Dimensional Sketch Required)
Special Notes
Frame Only Doors:  Frame only doors over 50" require hand sanding and will have an upcharge of $75 per door added to the order
Caution:  Long, continuous mullion strips are highly susceptible to bowing and warping.  This condition is typically the result of moisture absorption and expansion of door framing which applies pressure against the mullion strips.  Conestoga does not warranty mullions that bow due to exposure to high humidity conditions or environments.  A clear adhesive applied between the back of the mullion strip and glass panel may help reduce the amount of noticeable mullion movement.  Standard mullions are recommended for use in high moisture conditions. Glass is not included with any of the above doors. Shop your local glazier for your choices of glass and installation services.

Special Order Custom Design Mullion Doors

Contact QuikDrawers Sales for assistance with any designs below
(allow 3 business days for quotes)

Diamond	Double Diamond	Arched Lite	Double Arched Lite
Arched Lite with Horizontal Lite	Double Bow	Vesica	Double Bow Diamond
Hourglass Diamond	20Lite Double Diamond	Elliptical	X Lite
X Lite with Open Hub	X Lite with Solid Hub	X-Lite with Panel	Double X Lite
Double X Lite with Horizontal Lite	Triple X Lite	Triple X Lite with Horizontal Lite

Select Your Door Material

3/4" MDF

The next 2 steps will address the framing bead and framing edge choices for custom mullion doors.

Choose Your Framing Edge

B-2* Hinge boring okay	C-2 No hinge boring	H-2* Hinge boring okay	L-059* Hinge boring okay	L-149* Hinge boring okay
LC-2* Hinge boring okay	Machine Edge* Hinge boring okay	PRS-2* Hinge boring okay	V-2 No hinge boring

*Indicates edge profiles which can be bored for concealed hinges.

Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.

Choose Your Framing Bead

Regular	Ogee	Square

Hinge Boring Options

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a compact style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 

• Doors 9" to 42" receive two bores
• Doors 42-1/16" to 72" receive three bores
• Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
• Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
• Custom boring is available at additional cost per door (contact customer service)
• Dowel inserts are not included with any door.  The dowel inserts come with the hinge or can be purchased separately.

For Face Frame Cabinets Using Compact Hinges
Compact Style Hinge for "A" boring
Compact hinge bore with dowel inserts Select ("A" with) Placement is 3" to center from top and bottom of door	Compact hinge bore without dowel inserts Select ("A" without) Placement is 3" to center from top and bottom of door
For Face Frame Cabinets Using Long Arm Hinges
Long Arm Style Hinge for "B" & "C" boring
Long Arm hinge bore with dowel inserts Select ("B" with) Placement is 3" to center from top and bottom of door	Long Arm hinge bore without dowel inserts Select ("B" without) Placement is 3" to center from top and bottom of door
For Frameless Cabinets Using Long Arm Hinges
Long arm hinge bore pattern with dowel inserts Select ("C" with) Placement is 3-3/4" to center from top and bottom of door	Long arm hinge bore pattern without dowel inserts Select ("C" without) Placement is 3-3/4" to center from top and bottom of door

Product Warranty Information

Information about Conestoga product and finishing warranties.

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

• Single panel up to 26" wide and 48" tall - 1/8"
• Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
• Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
• Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products