Unfinished Custom Size "Classic Arch" Slab Style Valance
Design Your Valance & Have It Shipped Ready To Finish In Just 10-11 Business Days
The Actual Price Will Be Shown In Your Cart & Is Calculated Based On Your Selections & Dimensions
The "Classic Arch" Valance Does NOT Have Any Decorative Edge Options. All Edges Will Be Our "Machine Edge" Profile ONLY (Shown Below).
| Review Our Valance Matrix For Dimensional Information |
 |
| QuikDrawers Valance Matrix |
| Understanding The Valance Matrix/Dimensions |
|
Use The Matrix Below To Understand The Dimensional Specifications For Patterned Valances.
Refer To The Image Above When Reviewing The Matrix Below
Find Your Desired Overall Valance Length ("C") In One Of The "C" Rows.
The Top Number, In The Column With Your Desired Overall Length, Is The Cutout Length ("A"). The Cutout Will Be Centered On The Overall Valance Length.
From The "C" Block Containing Your Desired Overall Valance Length ("C"), The Far Right Number (Column "B"), In That Row, Is The Length Of The Flat Areas ("B") On The Left & Right Sides Of The Cutout.
Example: Ordering A Valance With An Overall Valance Length ("C") At 30", Note That:
30" Is Found In The 6th "C" Row & The 4th "A" Column Of The Table.
Referring To The Top Of The Column, In Row "A", You Will Find The Cutout Length ("A") At 19"
Referring Back To The 30" In The "C" Row, At The End Of The Row, In Column "B", You Will Find That The Length Of The Flat Areas ("B") At 5 1/2" For The Left & Right Ends Of The Valance
The Selected 30" Overall Valance Length ("C") Will Have A Cutout Length ("A") Of 19", Centered On The Valance, With 5 1/2" Long Flat Areas ("B") At The Left & Right Ends Of The Valance
**NOTE: Dimensions "A" & "B" Are Determined By Your Overall Valance Length ("C"). The "A" & "B" Dimensions CANNOT Be Changed Manually As They Are Automatically Calculated**
(See Examples Below The Matrix)
|
| A* |
9" |
11" |
14" |
19" |
24" |
30" |
42" |
54" |
66" |
78" |
B |
| C |
15" |
17" |
|
|
|
|
|
|
|
|
3" |
| C |
16" |
18" |
21" |
26" |
31" |
37" |
49" |
61" |
73" |
85" |
3 1/2" |
| C |
|
19" |
22" |
27" |
32" |
38" |
50" |
62" |
74" |
86" |
4" |
| C |
|
20" |
23" |
28" |
33" |
39" |
51" |
63" |
75" |
87" |
4 1/2" |
| C |
|
|
24" |
29" |
34" |
40" |
52" |
64" |
76" |
88" |
5" |
| C |
|
|
25" |
30" |
35" |
41" |
53" |
65" |
77" |
89" |
5 1/2" |
| C |
|
|
|
|
36" |
42" |
54" |
66" |
78" |
90" |
6" |
| C |
|
|
|
|
|
43" |
55" |
67" |
79" |
91" |
6 1/2" |
| C |
|
|
|
|
|
44" |
56" |
68" |
80" |
92" |
7" |
| C |
|
|
|
|
|
45" |
57" |
69" |
81" |
93" |
7 1/2" |
| C |
|
|
|
|
|
46" |
58" |
70" |
82" |
94" |
8" |
| C |
|
|
|
|
|
47" |
59" |
71" |
83" |
95" |
8 1/2" |
| C |
|
|
|
|
|
48" |
60" |
72" |
84" |
96" |
9" |
|
**Note: The "B" Dimensions (Length Of Flat Areas), Listed On The Matrix Above, Are Based On Whole Inch (No Fraction) Overall Valance Lengths ("C").
Any Overall Valance Length ("C") Fraction 1/2" Or Less, Round Down To The Nearest ("C") Dimension On The Matrix & Reference Row "A", Above That Dimension, To Find Your Cutout Length ("A").
To Calculate The "B" Dimension (Length Of Flat Areas), You Will Take Your Overall Valance Length ("C"), Subtract Your "A" Dimension (Cutout Length) & Divide By (2).
Example: If Ordering An Overall Valance Length ("C") Of 25 1/2", Round Down To 25" When Referencing The Matrix Above. At The Top Of The Column, Where 25" Is Listed, You Will Find Your Cutout Length ("A") Dimension Of 14". This Will Be The Width Of The "Arch". The Length Of The Flat Area ("B") Dimensions Will Be Your Overall Valance Length ("C"), Minus Your Cutout Length ("A") Dimension, Divided By (2).
So, Your Overall Valance Length ("C") Will Be 25 1/2", With A Cutout Length ("A") Of 14", & Flat Areas ("B"), On The Left & Right Of The Cutout, At 5 3/4".
(25 1/2 ("C") - 14 ("A")) / (2) = 5 3/4 ("B")
Any Overall Valance Length ("C") Fraction 9/16" Or Greater, Round Up To The Nearest ("C") Dimension On The Matrix & Reference Row "A", Above That Dimension, To Find Your Cutout Length ("A").
To Calculate The "B" Dimension (Length Of Flat Areas), You Will Take Your Overall Valance Length ("C"), Subtract Your "A" Dimension (Cutout Length) & Divide By (2).
Example: If Ordering An Overall Valance Length ("C") Of 25 5/8", Round Up To 26" When Referencing The Matrix Above. At The Top Of The Column, Where 26" Is Listed, You Will Find Your Cutout Length ("A") Dimension Of 19". This Will Be The Width Of The "Arch". The Length Of The Flat Area ("B") Dimensions Will Be Your Overall Valance Length ("C"), Minus Your Cutout Length ("A") Dimension, Divided By (2).
So, Your Overall Valance Length ("C") Will Be 25 5/8", With A Cutout Length ("A") Of 19", & Flat Areas ("B"), On The Left & Right Of The Cutout, At 3 5/16".
(25 5/8 ("C") - 19 ("A")) / (2) = 3 5/16 ("B")
|
|
Instructions for Sizing Valance Arch
- Review the chart picture above and you will use both the "A" dimension and the "C" dimension to size your valance. The height is fixed at 6" on all of these valances and the chart above shows the reveal of the valance from the top of the valance to the top of the arch (2 1/2" or 3", depending on style). The "B" dimension will be the difference between the overall length (C) minus the length of the arch (A) divided by 2.
- It is recommended that you find the length of the arch that you want by going across the "A" row until you come to the length of the arch that comes closest to your design dimensions.
- Go down the "C" Rows until you get to the overall length that you want for the valance. This may be longer than your opening so that you can trim the ends to length.
Example #1: There is a space of 50" and if you look across and find the 50" width in the "C" rows, you will see that this will produce an arch of 42" by going straight up to the "A" Arch length line. So, if you subtract the 42" from the 50" your difference is 8". Divide the 8" by 2 and each "B" dimension will be 4".
Example #2: There is a space of 50" and you want a valance with an arch that will cover as much of that space as possible. Go across the "A" row to find the Arch length that is closest without exceeding your space. In this case it is 42". Now, go straight down to the "C" row to the lengths that are available for that length arch. In this case, the minimum is 49" and the maximum is 60".
Product Warranty Information
Information about Conestoga product and finishing warranties.
Finishing Notes
When ordering unfinished, doors should be properly prepared prior to applying any finishing products. Be sure to read and understand the instructions provided by your finish manufacturer. You may need to perform additional sanding to prepare your products for finishing.
Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen. By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way. Your custom cabinet doors are available in a great selection of wood species which you will finish with your chosen stain, paint or finish.
If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer.
(Click on link or image above for measuring guide)
