International Exotic Species Doors

Clean lines and natural wood tones from around the world help to achieve the look of contemporary, high-end European cabinetry. Choose from familiar wood grains or step out of the ordinary with a more exotic look and create that unique contemporary kitchen design. 

This famous maker's International Specie Collection includes nine unique veneers on modern door designs.  Choose from domestic woods including plain sliced Cherry and Maple, or Rift Cut White Oak and Birdseye Maple.  For a more dramatic effect, try the unique looks of Figured Anigre, Bamboo, Wenge, Zebrawood and Macassar Ebony.

Each veneer is available in either vertical or horizontal grain directions and can be further enhanced with the sequential grain matching option.

Whatever your preference, the International Specie Collection provides the look you'll need for your next contemporary kitchen project.

Standard lead time is 9-10 work days unfinished and an additional 6-7 days for finishing.

(Astoria design in Wenge shown)
The "Astoria"
Cherry	Hard Maple	Rift Cut-White Oak
The "Savoy"
Anigre	Bamboo	Birdseye Maple
Macassar Ebony	Wenge	Zebrawood
All doors above are shown in the Savoy (.5mm edgeband) design.  Cherry, Hard Maple and Rift Cut White Oak are also available in the Astoria (3mm edgeband) design.
	Astoria (3mm edgeband)	Savoy (.5mm edgeband)

Astoria & Savoy Door Specifications:

• ¾" thick veneered MDF panel.
• Bamboo uses Grade A vertical/caramelized veneers on face and back
• Cherry uses Grade A book matched veneers on face with Grade 1 veneers on back
• Hard Maple uses Grade A book matched veneers on face with Grade 2 veneers on back
• Rift Cut White Oak uses Grade A rift cut book matched veneers on face with Grade 1 rift cut veneers on back.

Savoy Only Specifications for International Species:

• Anigre uses Grade A book matched veneers on face with Grade 1 veneers on back
• Birdseye Maple uses Grade A rotary cut veneers on face with Grade 1 rotary cut natural maple on back.
• Macassar Ebony, Wenge and Zebrawood use quartered/reconstituted Grade A veneers on face with Grade A quartered/reconsituted veneers on back

Hinge Boring Options

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a compact style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 

• Doors 9" to 42" receive two bores
• Doors 42-1/16" to 72" receive three bores
• Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
• Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
• Custom boring is available at additional cost per door (contact customer service)

For Face Frame Cabinets Using Compact Hinges
Compact hinge bore with dowel inserts Select ("A" with) Placement is 3" to center from top and bottom of door	Compact hinge bore without dowel inserts Select ("A" without) Placement is 3" to center from top and bottom of door
For Face Frame Cabinets Using Long Arm Hinges
Long Arm hinge bore with dowel inserts Select ("B" with) Placement is 3" to center from top and bottom of door	Long Arm hinge bore without dowel inserts Select ("B" without) Placement is 3" to center from top and bottom of door
For Frameless Cabinets Using Long Arm Hinges
Long arm hinge bore pattern with dowel inserts Select ("C" with) Placement is 3-3/4" to center from top and bottom of door	Long arm hinge bore pattern without dowel inserts Select ("C" without) Placement is 3-3/4" to center from top and bottom of door

Product Warranty Information

Information about product and finishing warranties.

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

• Single panel up to 26" wide and 48" tall - 1/8"
• Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
• Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
• Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products