BLUM 110º Soft-Close Hinge


Please Choose Or Scroll Down For More Info:





Starting at: $5.19

Add to Cart:

Product Description

Blum 110° Soft-Closing Hinges

  • Choose Hinge and Mounting plate to attain correct overlay or inset as follows:
  • 1/4" Overlay - Hinge B071B3650‚ Mounting Plate B175H710
  • 1/2" Overlay - Hinge B071B3550‚ Mounting Plate B175H713
  • Full Overlay - Hinge B071B3550‚ Mounting Plate B175H710
  • Inset - Hinge B071B3750‚ Mounting Plate B175H710
  • Limited Lifetime Warranty
  • Screws Included with screw-on hinges
  • Mounting Plates for Hinges must be ordered separately
  • 13mm cup depth
  • new insertion ram for press in hinges BMZM.0040
  • Can use on thicker doors up to 1"

Do I need Press-on or Screw-on hinges?

Back side of press-on hinge - note the dowels Back side of screw-on hinge - no dowels
Picture of press-on type hinge, back side Picture of screw-on type hinge, back side
Cabinet door prepared for press-on hinges Cabinet door prepared for screw-on hinges
Picture of reverse side of cabinet door, prepared for press-on type hinge, note the additional dowel holes bored next to the mortise cup Picture of reverse side of cabinet door, prepared for screw-on type hinge, there is only the mortise cup bored
Note:  The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes.  The dowels in that case are already mounted.  If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.

Sold each

Minimum order 2 each

"How to" page for calculating hinge overlay