Blum 39C Soft Close Hinge

Item # 14754

Please Choose Or Scroll Down For More Info:




Starting at: $4.52  / Each

Add to Cart:
Product Description

Blumotion 39C Compact Hinge by Blum

Specifications

Blum soft-close compact Hinge

Shown With Blum Compact Cover Cap

(Sold Separately - Available Above)
  • Compact One Piece European Hinge With Built-In Blumotion
  • Mounting Plate & The Hinge Are Combined Into One Unit
  • Blumotion Soft Closing Mechanism Allows The Cabinet Door To Close Softly
  • This Hinge May Be Used To Replace Any Compact One Piece European Hinge That Is Installed With The Following:
    • The Same Overlay Dimension
    • A Bore Distance Of 1/8" (3mm) (The Bore Distance Is The Distance Between The Edge Of The Door & The Edge Of The Cup Drilled In The Back Of The Door)
    • A Cup Diameter Of 35mm (1-3/8")
    • 1/2" Cup Depth
  • This Hinge Features:
    • Overload Safety Feature (Protects The Soft Close Mechanism If The Door Is Slammed)
    • Deactivation Switch For Small Or Light Weight Doors Allows One Of The Hinges To Be Deactivated For Less Dampening Action Per Door
  • Hinge Is 6-way Adjustable After Installation
  • Screws Are Included

Screw-On Model (No Dowels)

 Model Overlay Press-In or Screw-On
355B.16 1" Screw-on
355B.20 1-1/4" Screw-on
355B.21 1-5/16" Screw-on
355B.22 1-3/ 8" Screw-on
355B.24 1- 1/ 2" Screw-on
355B.25 1- 9/16" Screw-on

Press-In Model (With Dowels)

 358B.16 1" Press-In
358B.20 1-1/4" Press-In
358B.21 1-5/16" Press-In
358B.22 1-3/8" Press-In
358B.24 1-1/2" Press-In
358B.25 1-9/16" Press-In

We Advise When Changing Hinges On Your Door, You Should Change All Of The Hinges. Mixing Different Types Or Brands Of Hinges May Cause Door Binding Problems.

Do I Need Press-In Or Screw-On Hinges?

Picture of press-on type hinge, back side

Back Side Of Press-In Hinge - (Note The Dowels)

Picture of screw-on type hinge, back side

Back Side Of Screw-On Hinge - (Note NO Dowels)

Picture of reverse side of cabinet door, prepared for press-on type hinge, note the additional dowel holes bored next to the mortise cup

Cabinet Door Prepared For Press-In Hinges

Picture of reverse side of cabinet door, prepared for screw-on type hinge, there is only the mortise cup bored

Cabinet Door Prepared For Screw-On Hinges
Note:  The "Press-In" Type Hinge Was Developed For The Manufacturers As A Way To Automatically Align Hinges & Place Them On The Cabinet Door In The Proper Location By Just "Pressing" Them Into The Holes.  For That Reson, The Dowels Are Aready Secured To The Hinge.  If You aAe Replacing This Type Of Hinge, You Can Get Either Type Of Hinge & Either Use The New Dowels (Already Attached To The Hinge) Or You Can Use The Screw-On Model & Just Use You Existing Screws Already In Your Doweled Door.

Sold Each - Minimum Quantity (4)

"How to" page for calculating hinge overlay