Blum Face Frame Mounting Plate

• Overlay Face Frame Adapter plate
• Front tabs align mounting plate
• B175H6000 (0mm) steel plate
• B175H6030 (3mm) steel plate
• B175H6060 (6mm) steel plate
• B175L6030.21 (3mm) cast metal plate (shown below)

Using Blum face frame mounting plate for inset doors

B175H5030.21 Inset Mount for Face Frame Cabinets	Blum Long Arm Hinge with B175H5030.21 Mount

• Use B175H5030.21 which mounts on back side of face frame and is used with half crank Blum hinge

These hinges can also be used with the Blum 170 degree hinge.

Attach mounting plates with #6 wood screws

How to determine mounting plate thickness - 

Selection of the hinge mounting plate will determine the amount of "overlap" or "overlay" of the door.

To determine plate requirement:

0mm = 3/4" overlay 
3mm = 1/2" overlay
6mm = 3/8" overlay

-OR-

You can measure the thickness of the plate like this:

0MM	3MM	6MM
1/4" thick	3/8" thick	1/2" thick

Sold as each

Minimum order: 4

"How to" page for calculating hinge overlay

Questions? Visit the Cabinet Hinge Glossary