Solid Wood Dovetail Rollout with Concealed Vitus Soft-Close, Self-Close, Full Extension Slides

A Single Rollout With Soft Close Undermount Slides & Hardware

Current Production Lead Time For All Drawer Boxes/Rollouts 6 - 9 Business Days

Drawer & slide combination that "ticks all the boxes" at an incredible price.

Drawer box & slide kit Includes:

• Solid Wood, assembled, UV cured clear-coat drawer
• Choose from 5/8" thick Birch or Hard Maple
• Vitus brand concealed undermount, soft-close, self-close, full extension slides
• 75lb capacity standard mount, 100 lb capacity for shelf mount
• Locking devices
• Optional 1/4" or 1/2" thick bottom
• Minimum drawer width 5-5/8"
• As with any brand concealed undermount, you MUST allow up to 1" additional depth clearance to install the hardware.
  • Example:  A nominal length 21" slide requires up to 22" for installation, an 18" slide requires up to 19", etc.
• Shelf mount slide option is pre-drilled for floor/shelf surface installation --- Standard mount with rear brackets is not (see special instructions below for shelf mounting)
• Rear mount brackets
• Mounting screws (for slide)
• Bumpers included with rollout or highback rollout
• *QuikDrawers Limited Lifetime Warranty for drawer and hardware

1/4" Build-Ups For "Cabinet Bottom" Mounting

Some Cabinets Will Have A 1/8" - 1/4" "Lip" Where The Cabinet Bottom Panel Meets The Backside Of The Face Frame.  In Situations Like This, It Is Recommended That You Use A "Build-Up" To Raise The Drawer/Rollout, Off The Bottom, So That the Drawer/Rollout Will Operate As Intended.  Our Build-Ups Are 1/4" Unfinished Plywood And Are A Perfect Solution.

Sizing drawer for use with concealed undermount, soft close slide

How to measure - Be sure to order the size drawer that you want.  We do NOT do any calculations for you. (Use outside dimensions)

(click image to open in new window)

Quikdrawers 5/8" solid Birch or Natural Hard Maple drawer box program designed for any drawer or pullout/rollout shelf need. These pre-finished drawer boxes can be ordered with a variety of options, just scroll down this page for more information. 

Drawer box and rollout shelf construction

Drawer boxes are constructed with 5/8" thick pre-finished solid wood sides, dovetail joints on all four corners and a standard matching 1/4" thick B-3 grade plywood bottom.  1/2" bottoms are available as an upgrade.  All material used is of Standard Grade and will consist of natural colors of the species selected.  Mineral, color and grain variation is allowed and some finger joints may be visible (on top/bottom edge only).

Some companies will tell you that dovetail joints, solid wood and a UV clear coat finish is not important...  That's because they can't offer it, especially at these prices!

All bottoms are recessed 1/2" and all sides have 1/16" eased edges.  Drawer boxes are shipped pre-assembled.  Notching for undermount slides is available (release clips are not supplied unless ordered with our Vitus Under-mount slide).  We strongly recommend a 1/2" thick bottom if your drawer box or rollout shelf is 24" or wider.

Drawer Bottoms Are Inserted Into Dado Groove For Strength
Standard bottom recess on all drawers will allow for use with modern undermount, concealed slides	Dado inset bottom for superior strength and load bearing capacity

---

Every drawer and rollout is branded... your guarantee of quality! (OEM and trade customers only may request "No Logo")
White Birch Drawer	Natural Hard Maple Drawer

Drawer Box Ordering Parameters

Maximum height for rollout and high back rollouts is 12"
Drawer boxes over 36" width or depth will be shipped at higher weights due to dimensional weight rules set by carriers

Drawer Box Types

• Our Standard drawer is designed for new construction or replacement of missing or broken drawer boxes.
• Our Rollout drawer is designed for any storage need and with the attractive scoop cut, "galley handle" can be used in stacks and under counter applications.
• Our High Back Rollout drawer has feature of both the standard drawer box, rollout drawer box and adds the "High Back" option for applications where you may be concerned about pullout shelving contents tipping over.  Regardless of selected rear height, the front will always be 3" high, allowing for easy viewing of the contents.

Standard	*Rollout	**High Back (see note below)
*Scoop handle is 1" x 5" and is standard with Rollout or High Back Rollout boxes. **When ordering the high back drawer, the height of the box is the rear "high side" and has a minimum of 6". The front is 3" regardless of rear height .

Optional Undermount Notching

Optional undermount notching is based on standard manufacturers requirements (1-1/2" wide) and is only available as shown below. (Selecting this option above does not include the slide)  We do NOT offer or perform custom notching or boring.

Rear notching for Undermount Concealed Slides (no changes allowed)

Rear notching Specifications (no alterations)

(Click to enlarge)

Our standard drawer box lead time is just 7-10 work days and may be affected by workload and other conditions not under our control.  This is not a guarantee of production timeframes.

Choosing Drawer Slides for Your Drawer

If you are also changing drawer slides or adding a new drawer and you need some information about choosing drawer slides or how to size your drawer for your drawer slides, click on this link: Choosing drawer slides for your new or replacement drawer box 

Optional Drawer Front Screws

You may choose to include the optional screws for attaching your drawer front to your drawer.  If you do, please read the Drawer Front Screw webpage for important information.  We do NOT drill the holes in the drawer for your drawer front screws.

QuikDrawers Limited Lifetime Warranty

QuikDrawers Lifetime warranty is for defects in materials and craftsmanship for the original purchaser.  This limited lifetime warranty for QuikDrawers custom drawers has specific conditions and exclusions.  Please see Warranty Information page for details.

If you have questions about these options or specifications, just give us a call at

1-866-937-7429 (Mon-Fri 8am - 4pm, central time)

*Some conditions apply.  Drawers may not be combined with other items for free shipping.  Products purchased along with drawers will be charged appropriate shipping for those items.  Contact Sales for other details.  

Drawer Informaion Links

• Drawer box type option
• Bottom Thickness option
• Drawer Front Screws option
• Download a set of "common" undermount slide installation instructions
• "Special" instructions for drilling slides for shelf installation

Sold per kit
Model: wd.csc.kit

*Warranty will require QuikDrawers logo in drawer along with original purchase receipt