Custom painted wood valance
Finished with Colourtones paints and glazes

Your valance can be shipped painted, ready to install in just 15-16 work days

Your price will be calculated based on option selections and size

The illustrations below represent typical valances.

Finished valances are sanded and finished with color coats and conversion varnish topcoat.  (see finishing specifications for details)

Our valances can also be shipped unfinished or you can choose from a wide variety of stain and glaze colors. 

Choose your valance design

Classic Arch	Elegant Arch
Roman Arch	Straight
Traditional Arch

Review Sizing Chart

(Click to open in new window)

(Click to open in new window)

Instructions for Sizing Valance Arch Review the chart picture above and you will use both the "A" dimension and the "C" dimension to size your valance.  The height is fixed at 6" on all of these valances and the chart above shows the reveal of the valance from the top of the valance to the top of the arch (2 1/2" or 3", depending on style).  The "B" dimension will be the difference between the overall length (C) minus the length of the arch (A) divided by 2. It is recommended that you find the length of the arch that you want by going across the "A" row until you come to the length of the arch that comes closest to your design dimensions. Go down the "C" Rows until you get to the overall length that you want for the valance.  This may be longer than your opening so that you can trim the ends to length. Example #1:  There is a space of 50" and if you look across and find the 50" width in the "C" rows, you will see that this will produce an arch of 42" by going straight up to the "A" Arch length line.  So, if you subtract the 42" from the 50" your difference is 8".  Divide the 8" by 2 and each "B" dimension will be 4". Example #2:  There is a space of 50" and you want a valance with an arch that will cover as much of that space as possible.  Go across the "A" row to find the Arch length that is closest without exceeding your space.  In this case it is 42".  Now, go straight down to the "C" row to the lengths that are available for that length arch.  In this case, the minimum is 49" and the maximum is 60".

Select Your Door Material

Paint Grade Hard Maple

Select Your Colourtones Paint Color
Pictures below are representative of the Colourtone Paints and glaze combinations available.

Consider ordering a sample of your finish color/wood combination.

Colourtones Paint Finishes (Click on picture for larger image)
Antique White	Burgundy	Cadet Grey	Chesapeake	Creamy Butter
Crystal White	Designer White	Ebony	Ebony on Red Oak	Frosty White
Hearthstone Grey	Metropolitan Grey	Sage	Sandstone	Slate Blue
Colourtone Paint Finishes with Glaze (Click on picture for larger image)
Burgundy with Coffee	Chesapeake with Caramel	Chesapeake with Coffee	Chesapeake with White	Creamy Butter with Chai
Creamy Butter with Coffee	Creamy Butter with White	Crystal White with Caramel	Crystal White with Chai	Crystal White with Coffee
Crystal White with Oyster	Crystal White with Pewter	Designer White with Coffee	Designer White with Oyster	Designer White with Pewter
Frosty White with Chai	Frosty White with Coffee	Frosty White with Pewter	Hearthstone Grey with Coffee	Hearthstone Grey with Pewter
Sage with Coffee	Sage with Pewter	Sage with White	Sandstone with Coffee	Sandstone with Pewter
Sandstone with White	Slate Blue with Coffee

Select An Optional Glaze Color

Straight valance has edge options below
ALL other valances come with Machine Edge Only

B Rabbet 7/16" deep 3/8" high	B-2	C Rabbet 7/16" deep 3/8" high	C-2	CFP-2
E-2	FEP** Finished End Panel Rabbet 11/16" deep 3/16" high	FP	H Rabbet 7/16" deep 3/8" high	H-2
J-2	L-034	L-059	L-061	L-120
L-149	L-253 5 degree back bevel	L-281	L-297²	L-304²
L-686  5 degree back bevel	L-772	L-803	LC-2²	LC-Inset
Machine Edge	PRS-2	RC-2	V-2

² indicates a premium edge which will result in additional charge per door, if available

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

(Click on link or image above for measuring guide)