Exterior Grade Custom Drawer Fronts

Item # 26883


Please Choose Or Scroll Down For More Info:














Starting at: $57.45

Add to Cart:

Product Description

Custom unfinished exterior grade wood cabinet drawer fronts, perfect for use outdoors or on the boat
Design your own indoor/outdoor cabinet doors and drawer fronts and have them shipped, ready to finish

Lead time:  10-11 work days, excluding date of order
(All lead times are subject to variations in workload)

Prices are calculated based on option selections and size

The illustrations below represent typical cabinet doors.

Unfinished cabinet doors and drawer fronts are sanded to 220 prior to shipping.  (see finishing specifications for details)



Design your Cabinet Doors
(Model numbers are listed below style pictures)

Raised, Recessed and Grooved Panel Drawer Fronts

Standard Square Raised Panel Drawer Front Albany Shaker Drawer Front Slab Front
Standard Square Raised Panel Door Profile
7½" x 5-7/8" minimum w x h
1½" Rails & 2-5/16" Stiles
Slant raise shown
P-057 Panel for flat panel doors and drawer fronts
7" x 3-7/8" minimum w x h
1½" Rails & 2-5/16" Stiles
Select Reverse G-Cove for recessed panel
Standard Slab Style Drawer Front
3½" x 6" minimum w x h
66½" x 29" Maximum w x h
(horizontal grain)
Machine edge shown
CRP10 Albany Slab
#10 Flat Panel Drawer Front TW-10 Flat Panel Drawer Front  Keystone Flat Panel Drawer Front

#10 drawer fronts
3" x 3" minimum w x h
Matches Slant raise
 

Std 1/4" Panel for flat panel doors and drawer fronts
7" x 3-3/8" minimum w x h
1½" Rails & 2-5/16" Stiles
Select Std 1/4" MDF core veneered panel
Keystone drawer fronts
2-3/4" x 2-3/4" minimum w x h
Matches G-Cove raise
 
#10 TW-10  Keystone

 Grooved Panel Drawer Fronts
(Grooved Panels REQUIRE selection of Reverse G-Cove Panel Raise)

FSC Certified - Ardmore grooved panel door FSC Certified - Woodford grooved panel door FSC Certified - Yardley grooved panel door
Ardmore grooved panel door profile
7" x 5-1/8" minimum w x h
1½" Rails & 2-5/16" Stiles
3/8" Reverse G-Cove raise shown
G-015 rout - 1½" spacing
Woodford grooved panel door profile
5½" x 5½" minimum w x h
1½" Rails & 2-5/16" Stiles
3/8" Reverse G-Cove raise shown
G-121 rout - 2" spacing  
Yardley grooved panel door profile
7" x 5-1/8" minimum w x h
2-5/16" Framing
3/8" Reverse G-Cove raise shown
G-012 rout - 1½" spacing 
Ardmore Woodford Yardley


Select Your Door Material

Brazilian Cherry exterior or outdoor cabinet door Cypress exterior or outdoor cabinet doors Brazilian Cherry exterior or outdoor cabinet door
Mahogany Cypress Brazilian Cherry
Spanish Cedar exterior or outdoor cabinet doors Teak exterior or outdoor cabinet door Poplar, Thermally modified for exterior or outdoor use
Spanish Cedar Teak Poplar, Thermal Modified

The next 3 steps will address the framing bead, framing edge and panel raise choices for custom drawer fronts.  Slab Style fronts will require framing edge choice only.

Framing bead, framing edge and panel raise selections


Choose Your Framing Edge
(For all drawer front styles)

B Framing Edge B-2 Framing Edge C Framing Edge C-2 Framing Edge CFP Framing Edge
B
No hinge boring
Rabbet 7/16" deep
3/8" high
B-2*
Hinge boring okay
C
No hinge boring
Rabbet 7/16" deep
3/8" high
C-2
No hinge boring
CFP
No hinge boring
CFP-2 Framing Edge E-2 Framing Edge FEP Framing Edge FP Framing Edge H Framing Edge
CFP-2*
Hinge boring okay

E-2
No hinge boring

FEP**
Finished End Panel
Rabbet 11/16" deep
3/16" high
FP
No hinge boring
H
No hinge boring
Rabbet 7/16" deep
3/8" high
H-2 Framing Edge J-2 Framing Edge L-034 Framing Edge L-059 Framing Edge L-061 Framing Edge
H-2*
Hinge boring okay
J-2
No hinge boring
L-034*
Hinge boring okay
L-059*
Hinge boring okay
L-061
No hinge boring
L-120 Framing Edge L-149 Framing Edge L-253 Framing Edge L-281 Framing Edge L-297 Framing Edge
L-120
No hinge boring
L-149*
Hinge boring okay
L-253
No hinge boring
5 degree back bevel
L-281*
Hinge boring okay
L-297*²
Hinge boring okay
L-304 Framing Edge L-686 Framing Edge L-772 Framing Edge L-803 Framing Edge LC-2 Framing Edge
L-304²
No hinge boring
L-686
No hinge boring
5 degree back bevel
L-772
No hinge boring
L-803*
Hinge boring okay
LC-2*
Hinge boring okay
LC-2 Framing Edge RC-2 Framing Edge Machine Framing Edge PRS-2 Framing Edge RC-2 Framing Edge
LC-Inset*²
Hinge boring okay
Machine Edge*
Hinge boring okay
PRS-2*
Hinge boring okay
RC-2
No hinge boring
V-2
No hinge boring
Finished end panel edge

* indicates edge profiles which can be bored for concealed hinges
² indicates a premium edge which will result in additional charge per door

Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.


Choose Your Framing Bead
(For 5 piece drawer fronts only)

Framing Beads for Inside Frame


Choose Your Panel Raise Style
(For 5 piece drawer fronts only)

Cabinet Door Panel Options

Solid wood panels may be comprised of multiple pieces of wood joined together to achieve the necessary width.  Inverted panel IP115 is charged as raised panel plus the additional charge reflected above in the option menus.  Doors 45" tall and greater will have a center rail installed (RP120) to help prevent warpage (unless otherwise specified).


Panel Choices If Selecting Grooved Doors
(For Ardmore, Woodford and Yardley Only)

You must select the Reverse G-Cove from the Panel Raise Menu

G-012 Groove, 1-1/2" spacing from center to center G-121 Groove, 1-1/2" spacing from center to center G-015 Groove, 1-1/2" spacing from center <br>to center
G-012
1½" spacing center to center

Groove width 1/4"
Groove depth 1/16"
G-121
1½" spacing center to center

Groove width 1/4"
Groove depth 1/8"

G-015
¾" or 1½" spacing center to center
 
Groove width 3/32"
Groove depth 3/64"


Optional Hand or Finger Pulls

Back Side Routed Finger Pulls
(priced per door)
Fingerpull rout selections
(Click to enlarge)
Hand Pull Specifications:
 
  • Hand pull routs are on the back side of the door and are minimally noticeable from a front view.
  • Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC)
  • Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide.
  • Not available with the following edge profiles:  E-2, FP, L-253, L-304, L-686, L-947 and RC-2
  • Adds one day to lead time.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Special note about door sizing:

Allowable tolerances for warpage and twist for five piece doors are:

  • Up to 25-15/16" wide and 47-15/16" high - 1/8"
  • Up to 25-15/16" wide and 48" to 64-15/16" high - 1/4"
  • Up to 25-15/16" wide and 65" to 83-15/16" high - 5/16"
  • Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

  • Up to 12" wide and 21-15/16" high - 1/8"
  • 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
  • Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
  • All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

 

Measuring for new or replacement cabinet doors and drawers
(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” PackagesOversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.