Exterior Grade Custom Drawer Fronts

Custom unfinished exterior grade wood cabinet drawer fronts, perfect for use outdoors or on the boat
Design your own indoor/outdoor cabinet doors and drawer fronts and have them shipped, ready to finish

Lead time:  10-11 work days, excluding date of order
(All lead times are subject to variations in workload)

Prices are calculated based on option selections and size

The illustrations below represent typical cabinet doors.

Unfinished cabinet doors and drawer fronts are sanded to 220 prior to shipping.  (see finishing specifications for details)

Design your Cabinet Doors
(Model numbers are listed below style pictures)

Raised, Recessed and Grooved Panel Drawer Fronts
7½" x 5-7/8" minimum w x h 1½" Rails & 2-5/16" Stiles Slant raise shown	7" x 3-7/8" minimum w x h 1½" Rails & 2-5/16" Stiles Select Reverse G-Cove for recessed panel	3½" x 6" minimum w x h 66½" x 29" Maximum w x h (horizontal grain) Machine edge shown
CRP10	Albany	Slab
3" x 3" minimum w x h Matches Slant raise	7" x 3-3/8" minimum w x h 1½" Rails & 2-5/16" Stiles Select Std 1/4" MDF core veneered panel	2-3/4" x 2-3/4" minimum w x h Matches G-Cove raise
#10	TW-10	Keystone
Grooved Panel Drawer Fronts (Grooved Panels REQUIRE selection of Reverse G-Cove Panel Raise)
7" x 5-1/8" minimum w x h 1½" Rails & 2-5/16" Stiles 3/8" Reverse G-Cove raise shown G-015 rout - 1½" spacing	5½" x 5½" minimum w x h 1½" Rails & 2-5/16" Stiles 3/8" Reverse G-Cove raise shown G-121 rout - 2" spacing	7" x 5-1/8" minimum w x h 2-5/16" Framing 3/8" Reverse G-Cove raise shown G-012 rout - 1½" spacing
Ardmore	Woodford	Yardley

Select Your Door Material

Mahogany	Cypress	Brazilian Cherry
Spanish Cedar	Teak	Poplar, Thermal Modified

The next 3 steps will address the framing bead, framing edge and panel raise choices for custom drawer fronts.  Slab Style fronts will require framing edge choice only.

Choose Your Framing Edge
(For all drawer front styles)

B No hinge boring Rabbet 7/16" deep 3/8" high	B-2* Hinge boring okay	C No hinge boring Rabbet 7/16" deep 3/8" high	C-2 No hinge boring	CFP No hinge boring
CFP-2* Hinge boring okay	E-2 No hinge boring	FEP** Finished End Panel Rabbet 11/16" deep 3/16" high	FP No hinge boring	H No hinge boring Rabbet 7/16" deep 3/8" high
H-2* Hinge boring okay	J-2 No hinge boring	L-034* Hinge boring okay	L-059* Hinge boring okay	L-061 No hinge boring
L-120 No hinge boring	L-149* Hinge boring okay	L-253 No hinge boring 5 degree back bevel	L-281* Hinge boring okay	L-297*² Hinge boring okay
L-304² No hinge boring	L-686 No hinge boring 5 degree back bevel	L-772 No hinge boring	L-803* Hinge boring okay	LC-2* Hinge boring okay
LC-Inset*² Hinge boring okay	Machine Edge* Hinge boring okay	PRS-2* Hinge boring okay	RC-2 No hinge boring	V-2 No hinge boring

* indicates edge profiles which can be bored for concealed hinges
² indicates a premium edge which will result in additional charge per door

Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.

Choose Your Framing Bead
(For 5 piece drawer fronts only)

Choose Your Panel Raise Style
(For 5 piece drawer fronts only)

Solid wood panels may be comprised of multiple pieces of wood joined together to achieve the necessary width.  Inverted panel IP115 is charged as raised panel plus the additional charge reflected above in the option menus.  Doors 45" tall and greater will have a center rail installed (RP120) to help prevent warpage (unless otherwise specified).

Panel Choices If Selecting Grooved Doors
(For Ardmore, Woodford and Yardley Only)

You must select the Reverse G-Cove from the Panel Raise Menu

G-012 1½" spacing center to center Groove width 1/4" Groove depth 1/16"	G-121 1½" spacing center to center Groove width 1/4" Groove depth 1/8"	G-015 ¾" or 1½" spacing center to center  Groove width 3/32" Groove depth 3/64"

Optional Hand or Finger Pulls

Back Side Routed Finger Pulls (priced per door)

(Click to enlarge)

Hand Pull Specifications:   Hand pull routs are on the back side of the door and are minimally noticeable from a front view. Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC) Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide. Not available with the following edge profiles:  E-2, FP, L-253, L-304, L-686, L-947 and RC-2 Adds one day to lead time.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Allowable tolerances for warpage and twist for five piece doors are:

• Up to 25-15/16" wide and 47-15/16" high - 1/8"
• Up to 25-15/16" wide and 48" to 64-15/16" high - 1/4"
• Up to 25-15/16" wide and 65" to 83-15/16" high - 5/16"
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products