Frame Only and Mullion Thermofoil Cabinet Doors
Item #26987
Please Choose Or Scroll Down For More Info:
Starting at: $26.44 / Each
1 Piece RTF Frame Only and Mullion Cabinet Doors
You are guaranteed to find the perfect door style with our extensive selection of Shaker, contemporary and traditional thermofoil doors and drawer fronts. Our 1 piece components are available in any of our standard thermofoil offerings in matte and satin foils. You will appreciate the superior color consistency and quality of our thermofoil doors.
RTF Thermofoil doors and drawer fronts are grouped below into Shaker, Traditional and Contemporary Series groups
Special Note: This manufacturer has a minimum order requirement and product orders less than $37 will have a "Small Order Fee" of $15 added to the order during checkout.
(Products offered by other manufacturers, shipping and handling charges do not apply toward the $37 manufacturer minimum. Actual charge for your selection will be shown after you "Add to cart")
The "Step by Step" guide below offers information about your selection options to be chosen in the menus above. Cabinet doors and drawer fronts will have a minimum charge of 1 square foot. Warranty information below.
Choose the style or shape of your Frame Only or Mullion Cabinet Door
First Choose the Shape of Your Door |
|||
| Square | Arch | Cathedral | |
 |
|
|
|
| Then... | |||
Choose a Lite Pattern |
|||
| Frame Only | Eclipse Frame Left (Select Arch option) |
Eclipse Frame Right (Select Arch option) |
|
|
|
|
|
| Multi Lite (Available with 4, 6, 8, 10 or 12 lites) |
9 Lite Country | 9 Lite Roman | |
|
|
|
|
| 6 Lite | 7 Lite Eclipse Left (Select Arch option) |
7 Lite Eclipse Right (Select Arch option) |
|
|
|
|
|
Select Your Door Framing and Mullion Design
Framing and Mullion Profiles available
|
||||||||||||||
|
||||||||||||||
| 2 Pass Frame and Mullions (click on any image to enlarge) |
||||||||||||||
| A109 | A174 | A201 | ||||||||||||
 |
 |
 |
||||||||||||
| Min/Max Sizing for Cabinet Doors Using A109, A174 & A201 Patterns (All dimensions are Width x Height) |
||||||||||||||
|
|
|
||||||||||||
| 3 Pass Frame and Mullions (click on any image to enlarge) |
||||||||||||||
| A107 | A301 | A501 | ||||||||||||
 |
 |
 |
||||||||||||
| Min/Max Sizing for Cabinet Doors Using A107, A301 & A501 Patterns (All dimensions are Width x Height) |
||||||||||||||
|
|
|
||||||||||||
| A731 | A901 (round corner) | |||||||||||||
 |
 |
|||||||||||||
| Min/Max Sizing for Cabinet Doors Using A731 & A901 Patterns (All dimensions are Width x Height) |
||||||||||||||
|
|
|||||||||||||
| 4 Pass Frame and Mullions (click on any image to enlarge) |
||||||||||||||
| A302 | A401 | A402 | ||||||||||||
 |
 |
 |
||||||||||||
| Min/Max Sizing for Cabinet Doors Using A302, A401 & A402 Patterns (All dimensions are Width x Height) |
||||||||||||||
|
|
|
||||||||||||
| A403 | ||||||||||||||
 |
||||||||||||||
| Min/Max Sizing for Cabinet Doors Using A403 Pattern (All dimensions are Width x Height) |
||||||||||||||
|
||||||||||||||
| 5 Pass Frame and Mullions (click on any image to enlarge) |
||||||||||||||
| A105 | A511 (round corner) | A951 | ||||||||||||
 |
 |
 |
||||||||||||
| Min/Max Sizing for Cabinet Doors Using A105, A511 & A951 Patterns (All dimensions are Width x Height) |
||||||||||||||
|
|
|
||||||||||||
| A961 | ||||||||||||||
 |
||||||||||||||
| Min/Max Sizing for Cabinet Doors Using A961 Pattern (All dimensions are Width x Height) |
||||||||||||||
|
||||||||||||||
Special Notes:
Components manufactured by Northern Contours are warranted against defects occurring in the material or manufacturing process under normal use for 5 (FIVE) years from the date of original purchase. Complete warranty certificate information is available at www.northerncontours.com or can be obtained by contacting Customer Service at 877-998-1814.
Products manufactured outside our normal specifications are not covered by our warranty. Products are not warranted if exposed to excessive heat. Proper installation of heat shields between components and ovens or between components and lighting that generates high temperatures is recommended.
Warranty covers repair or replacement of product only. Northern Contours' liability will not exceed the invoiced amount of the product.
Our manufacturing tolerance is ±1/32" or 1 mm. Warp specification is 1.5 mm per lineal foot. Warp is measured with the door on the cabinet with hinges fully adjusted. We recommend storing all raw components in a temperature-controlled environment upon delivery.
(Cabinet doors and drawer fronts will have a minimum size charge of 1 square foot)
Select Your Door Color From One Of The Color Groups
| RTF Color Group 1 (Click on any image to enlarge) |
||
| Cream (Solid Matte) |
Ontario White (Solid Matte) |
Matte Black (Solid Matte) |
 |
 |
 |
| RTF Color Group 2 (Click on any image to enlarge) |
||
| Antique White (Solid Matte) |
Bisque (Solid Matte) |
Cloud (Solid Matte) |
 |
 |
 |
| Glacier White (Solid Matte) |
Snow White (Solid Matte) |
|
 |
 |
|
Select Your Outside or "Framing Edge"
| B038 | B099 | B102 | B104 |
 |
 |
 |
 |
| B108 | B110 | B111 | B127 |
 |
 |
 |
 |
| B132 | B140 | B158 | |
 |
 |
 |
|
| The drawings above represent the edge profiles as closely as possible and may not be to scale. If dimensions are critical, consider ordering a sample product. | |||
Select Your Glass Retaining Method
| Standard Open Dado | T-Slot |
 |
 |
 |
 |
| Retainer clips and clear glass retainer strips are available for purchase. Our standard rout on frame backs is 1/4" deep and accommodates glass retainer clips. T-slot routing is 3/8" deep and accommodates glass retainer strips for 1/8" thick glass. These frames do not include glass inserts. | |
Select Frame Painting For Glass Retainer Dado
The area on the rear of the door, where the glass dado (notch in Step 4) is placed is not covered with thermofoil. Painting the notch is available in the option choices above.
Hinge Boring Options
If you intend to use a concealed European style hinge, here are your boring options. We normally recommend a compact style hinge if you have "Face Frame" style cabinets. If you have any questions, just give us a call.
- Doors 9" to 42" receive two bores
- Doors 42-1/16" to 72" receive three bores
- Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
- Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
- Custom boring is available at additional cost per door (contact customer service)
| Standard Hinge Placement for RTF Doors (Click on chart to open in new window) |
 |
| For Face Frame Cabinets Using Compact Hinges | |
 |
|
 |
 |
|
Compact hinge bore with dowel inserts |
Compact hinge bore without dowel inserts Select ("HB 2") Placement is 3" to center from top and bottom of door |
| For Face Frame Cabinets Using Long Arm Hinges | |
 |
|
 |
 |
| Long Arm hinge bore with dowel inserts Select ("HB 5") (Custom placement charge applies) Placement is 3 5/8" to center from top and bottom of door |
Long Arm hinge bore without dowel inserts Select ("HB 6") (Custom placement charge applies) Placement is 3 5/8" to center from top and bottom of door |
| For Frameless Cabinets Using Long Arm Hinges | |
 |
 |
| Long arm hinge bore pattern with dowel inserts Select ("HB 3") (Custom placement charge applies) Placement is 3 5/8" to center from top and bottom of door |
Long arm hinge bore pattern without dowel inserts Select ("HB 4") (Custom placement charge applies) Placement is 3 5/8" to center from top and bottom of door |
Optional Finger Pull
| Finger pull cutouts will be on top AND bottom of door panels | |
 |
 |
| Side view of cutout area | Top or bottom view of door or drawer front cutout |
(Click on link or image above for measuring guide)
Components manufactured by Northern Contours are warranted against defects occurring in the material or manufacturing process under normal use for 5 (FIVE) years from the date of original purchase. Complete warranty certificate information is available at www.northerncontours.com or can be obtained by contacting Customer Service at 877-998-1814.
Products manufactured outside our normal specifications are not covered by our warranty. Products are not warranted if exposed to excessive heat. Proper installation of heat shields between components and ovens or between components and lighting that generates high temperatures is recommended.
Warranty covers repair or replacement of product only. Northern Contours' liability will not exceed the invoiced amount of the product.
Remove the protective peel coat from product promptly after installation. Exposure to sun will make the peel coat difficult to remove. Adhesive residue can be cleaned with mineral spirits.
Our manufacturing tolerance is ±1/32" or 1 mm. Warp specification is 1.5 mm per lineal foot. Warp is measured with the door on the cabinet with hinges fully adjusted. We recommend storing all raw components in a temperature-controlled environment upon delivery.
Wood veneer variations in color and grain pattern are natural characteristics of wood and are not considered defects; therefore they are not covered under warranty.
Special Handling Charges For Oversize Products
Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.
If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order. The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges. We Will Notify You Prior To Placing Your Order In Production.
FedEx Oversize Packages
Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” Packages. Oversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s). As of 2020, This Surcharge Will Be $120 Per Oversize Package.
Fedex Peak Oversize Package Surcharge
During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.
UPS Oversize Packages
A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s). As Of 2020, This Surcharge Will Be $115 Per Oversize Package.
Address Changes For FedEx & UPS
Both FedEx & UPS Charge For Address Changes & Corrections. The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019. Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct. The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.
If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.