HR/Vitus Clip On/Long Arm "Soft Close" Hinge

Item # 28220


Please Choose Or Scroll Down For More Info:






Starting at: $3.82  / Each

Add to Cart:

Product Description

Concealed Cabinet Door Hinge With Built In Soft Close Mechanism

Finally!  An integrated soft close cabinet door hinge that is priced right and is easy to install.

If you are already familiar with using a clip top hinge, you will love this new cam adjustable hinge that is as easy to install as the standards that you are familiar with.

90° Door Swing 110° Door Swing 125° Door Swing
**NOTE** To Help Identify Your Hinge's "Door Swing" Angle, Notice How Much Your Hinge Pivots When Fully Open. The 90° Hinge Shows The "Arm" & The "Cup" Are Parrellel To Each Other.  The 110° Hinge Shows The "Arm" & The "Cup" Are Slightly Out Of Parrellel & The 125° Hinge Shows The "Arm" & The "Cup" Are Far From Parrellel.

Check out these great benefits:

  • Built-in soft close dampers bring doors to a soft and quiet close
  • 110° opening angle
  • Available as "press-in" w/8mm dowels or "screw on" 
  • Hinge and plate together provide 6 way adjustment (3 dimensional)
  • Clip-on base plates available for a wide variety of European and face frame applications
  • Cam adjustable plates allow full cam adjustment
  • Cold rolled steel construction with nickel plating
  • Tested beyond 100,000 cycles - Guaranteed to surpass all ANSI, BHMA & KCMA requirements

Concealed Soft Close Cabinet Hinge

Do I need Press-on or Screw-on hinges?

Standard hinge installation screws work well in solid wood stock and plywood, but screws lose strength in medium density fiberboard (MDF) or particleboard. If your cabinet doors or cases are made from these materials, you may want to choose hinges that include barbed plastic inserts (Dowels) that fit in predrilled holes. Tightening the installation screw pushes each dowel against the wall of the hole for a firm grip.

Back side of press-on hinge - note the dowels Back side of screw-on hinge - no dowels
Picture of press-on type hinge, back side Picture of screw-on type hinge, back side
Cabinet door prepared for press-on hinges Cabinet door prepared for screw-on hinges
Picture of reverse side of cabinet door, prepared for press-on type hinge, note the additional dowel holes bored next to the mortise cup Picture of reverse side of cabinet door, prepared for screw-on type hinge, there is only the mortise cup bored
Note:  The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes.  The dowels in that case are already mounted.  If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.

Mounting plates are conveniently offered with the hinges:

Choose your overlay from the pulldown menu above

  • 0mm for 5/8" overlay (600.3553.65) for face frame cabinets
  • 3mm for 1/2" overlay (600.3554.65) for face frame cabinets
  • 6mm for 3/8" overlay (600.3555.65) for face frame cabinets

Hinges and mounting plates are sold each (one hinge and one mounting plate) - Minimim order of 2

"Screw on" hinges and mounting plates shipped with or without screws.  "Press in" hinges have dowels and screws pre-installed.

Minimum order 2 each

Model 700 series

"How to" page for calculating hinge overlay