Quik-Shelf Pullout Shelf Kit 

Comes complete with Premium Solid Wood Pullout Shelf and Full extension, soft-close, self-close, concealed/undermount slides

The Quik-Shelf kit installs in just minutes and provides years of superior service.  Use the Quik-Shelf to organize base cabinet shelving as well as tall pantry shelves, increasing the efficiency of your kitchen storage.  These solid wood rollout shelves and concealed soft-close, self-close drawer slides will make storage access a breeze and at the same time, keep you off of your knees.  

The Quik-Shelf complete kit includes:

• Installs in minutes with just 4 included screws
• Solid wood pullout/rollout shelf
• Scoop cut "Galley" handle in front
• Dovetail joints on all four corners
• UV cured clear finish
• Concealed, soft-closing, self-closing slides can be mounted to shelf or cabinet walls/face frame
• 100lb capacity, full extension slides
• Locking device pre-installed on shelf
• Pullout shelf bumper(s)
• Option of 1/4" or 1/2" thick bottom
• Enjoy the security of our Limited Lifetime Warranty on shelf and hardware

Ordering Instructions

Available heights: 3 1/2", 4", 6", 8", 10" or 11"
Available Widths: 12", 14", 16", 18", 20", 22" & 24"
Available Depths: 15", 18", 21" & 24" (requires 1" additional for installation)

To Order Your Quik-Shelf:

• Select Solid Birch or Hard Maple for your shelf material
• Select the height of your Quik-Shelf
• Measure the width of your "Clear Opening" at your rollouts intended location.  ***"Clear Opening" is the measurement from frame to hinge, hinge to hinge or frame to frame, based on your rollout's intended location.
• Select the width closest to the "Clear Opening" measurement, without going over. This will be the width of your assembled Quik-Shelf kit.
• Select the depth of your Quik-Shelf.  Installation will require one additional inch beyond the length of the unit.
• Add to Cart -- price will be shown in your shopping cart

Tools For Ordering and Installation

Tools & materials for ordering and installation:  Double stick tape, pencil, measuring tape, screw driver or drill

The Quik-Shelf Single Pullout Kit may be installed directly to a shelf or to your cabinet face frame or walls.  Be sure to include the rear mounting bracket if you are mounting from face frame to rear wall

Tips for installing the Quik-Shelf Pullout Single Shelf Unit

One of the "delicate" steps of installation of a pullout shelf using shelf mount slides or brackets is sliding the pullout/drawer unit forward to expose the screw holes in the slides or in the brackets, depending on what hardware you are using.

The pictures below show how to use double stick tape to solve the problem of trying to pull the pullout/drawer forward without moving the slides or the mounting brackets.

Double Stick Foam Tape	Bottom View of Undermount Slides	Bottom View, Rear End of Undermount Slide
Bottom View, Front End of Undermount Slide	Place Tape Over Rear Screw Holes	Place Tape Over Front Screw Holes
Remove Paper To Expose Adhesive	Remove Paper To Expose Adhesive	Place Unit In Position On Cabinet Shelf
Slide Unit Carefully Forward, Exposing Screw Holes & Install 4 Screws

Note:  The slides should be installed on the pullout shelf before you set and press into position on your cabinet shelf.

Model: QS.wood.300