Custom painted wood cabinet front face frames
with Colourtones Fine Paint Finishes

Choose your custom front face frame from 162 different configurations.

If you need a custom design, just submit a drawing with the specifications and we can quote and build your design.

Whether you choose one of our custom wood cabinet front face frames or design your own, have them shipped direct to you and ready to finish.

The illustrations below represent our standard face frame layouts for the selected number of openings.
You may submit for quote, any custom layout with 1 to 8 openings - you are not limited to the configurations shown below.  Your front face frame price will be calculated based on option selections and dimensions.

For custom front face frames:

Submit a drawing with the following information to receive your quote:

• Overall cabinet front face height
• Overall cabinet front face width
• Width of each stile or rail (stiles run vertically, rails run horizontally)
• Stiles and rails can vary in widths within the same front face frame.  Example:  You can have a top rail that is 3" wide and the bottom rail remains the standard 1½" width or you can have one of the side stiles 2¼" wide because it will butt to a wall on that side.
• Maximum size available is 96" x 48" in either direction, height x width or width x height.  There are no exceptions
• Standard framing widths are 1½", additional widths are available, upcharge applies.  Each non-standard stile or rail will be charged additionally
• Minimum framing width is 3/4"
• Standard framing thickness is 3/4", 1" is available at additional charge
• Assembled face frames are sanded and finished with color coats and conversion varnish topcoat.  (seefinishing specifications for details)
• Framing wider than 4½" may have one glue joint.  Framing wider than 6½" may have two glue joints
• Minimum charge is 2 sq. ft.

Just draw out your configuration and fax it or scan and email.

Our face frames can also be shipped in a stained finish or you can choose from over 1,000 beautiful paint colors. 

Select the number of openings in your front face frame
Click on any image below for the full standard selection
(Dimensions shown are for illustration only)

Select Your Colourtones Paint Color
Pictures below are representative of the Colourtone Paints and glaze combinations available.

Consider ordering a sample of your finish color/wood combination.

Colourtones Paint Finishes (Click on picture for larger image)
Antique White	Burgundy	Cadet Grey	Chesapeake	Creamy Butter
Crystal White	Designer White	Ebony	Ebony on Red Oak	Frosty White
Hearthstone Grey	Metropolitan Grey	Sage	Sandstone	Slate Blue
Colourtone Paint Finishes with Glaze (Click on picture for larger image)
Burgundy with Coffee	Chesapeake with Caramel	Chesapeake with Coffee	Chesapeake with White	Creamy Butter with Chai
Creamy Butter with Coffee	Creamy Butter with White	Crystal White with Caramel	Crystal White with Chai	Crystal White with Coffee
Crystal White with Oyster	Crystal White with Pewter	Designer White with Coffee	Designer White with Oyster	Designer White with Pewter
Frosty White with Chai	Frosty White with Coffee	Frosty White with Pewter	Hearthstone Grey with Coffee	Hearthstone Grey with Pewter
Sage with Coffee	Sage with Pewter	Sage with White	Sandstone with Coffee	Sandstone with Pewter
Sandstone with White	Slate Blue with Coffee

Standard or Non-Standard Stile or Rail Width Charges
The standard stile and rail width for front frames is 1½".  If you wish to order either stiles or rails in a non-standard width, this can be done at an additional charge per stile or rail.  This cost adjustment will be made after you submit your order and before we put your front frame into the production queue.

Optional Face Frame Groove
Cabinet side panels can be joined to face with glue & splines, biscuits & glue, pocket screws or your favorite method.  Plastic splines are available for sale in our fastener category.

No Groove
CWSA	CWSE
Example of spline use to join cabinet side with CWSA groove	Example of spline use to join cabinet side with CWSE groove

Submit Your Order

(Your product will not be submitted to the production queue until your design plans have been received, and approved by our customer.  Any additional charges must also be paid prior to submitting your order to production.  This process will normally be completed within one business day.)