Custom Unfinished Mitered Mullion Doors

Select your mitered door style and material below.  These Conestoga custom mitered drawer fronts will suit the most discriminating tastes.

Due to lumber and construction market conditions, lead time:  7-8 weeks for production
(All lead times are subject to variations in workload)

Just follow the steps below to select the options for your new doors.

Choose your Cabinet Door Style
Click on any image to enlarge
Disregard the panel shown in these illustrations.
(Minimum Width x Height Shown Under Profile Image.  Glass is not included.)

CRP10 7½" x 7½" (Min W x H) 2-5/16" framing	CRP1389 7½" x 7½" (Min W x H) 2-5/16" framing	CRP1420 8¼" x 8¼" (Min W x H) 2-11/16" framing	CRP1999 7¾" x 7¾" (Min W x H) 2-11/16" framing	CRP10191 7-1/8" x 7-1/8" (Min W x H) 2½" framing
CRP10318 8-7/8" x 8-7/8" (Min W x H) 2-15/16" framing ¼" radius corners std	CRP10334 7½" x 7½" (Min W x H) 2-5/16" framing	CRP10382 6¾" x 6¾" (Min W x H) 2-5/16" framing	CRP10533 7½" x 7½" (Min W x H) 2-5/16" framing	CRP10605 5-3/8" x 5-3/8" (Min W x H) 2-1/16" framing
CRP10751 7½" x 7½" (Min W x H) 2-5/16" framing	CRP10827 7½" x 7½" (Min W x H) 2-5/16" framing	CRP10875 8-5/8" x 8-5/8" (Min W x H) 2-7/8" framing	CRP10946 8" x 8" (Min W x H) 2-15/16" framing	Midland 8¾" x 8¾" (Min W x H) 3" framing
Milan 7½" x 7½" (Min W x H) 2-15/16" framing	Mirage 10-5/8" x 10-5/8" (Min W x H) 3-7/8" framing	Montclair Cherry & Hard Maple Only 8-5/8" x 8-5/8" (Min W x H) 2-7/8" framing	Presidential Miter 7-7/8" x 7-7/8" (Min W x H) 2½" framing	Prestige 7-7/8" x 7-7/8" (Min W x H) 2-7/8" framing

Select your cabinet door lite pattern

Choose The Lite Arrangement Or Style Of Your Mullion Doors (All lites evenly spaced.  Clear glass retainer moulding supplied with all doors.  Glass is not included.)
M1	M4	M6	M8
Minimum W x H 7-7/8" x 7-7/8" See Special Notes	Minimum W x H 7-7/8" x 7-7/8"	Minimum W x H 7-7/8" x 11-7/8"	Minimum W x H 7-7/8" x 14-7/8"
M10	M12	*M9 Offset (CRP10 frame only)	*M11 Offset (CRP10 frame only)
Minimum W x H 7-7/8" x 19-7/8"	Minimum W x H 11-7/8" x 17-7/8"	Minimum W x H 11-7/8" x 11-7/8"	Minimum W x H 11-7/8" x 14-5/8"
Odyssey
Minimum W x H 14-7/8" x 11-3/8" (Dimensional Sketch Required)
Special Notes
Frame Only Doors:  Frame only doors over 50" require hand sanding and will have an upcharge of $75 per door added to the order
Caution:  Long, continuous mullion strips are highly susceptible to bowing and warping.  This condition is typically the result of moisture absorption and expansion of door framing which applies pressure against the mullion strips.  Conestoga does not warranty mullions that bow due to exposure to high humidity conditions or environments.  A clear adhesive applied between the back of the mullion strip and glass panel may help reduce the amount of noticeable mullion movement.  Standard mullions are recommended for use in high moisture conditions. Glass is not included with any of the above doors. Shop your local glazier for your choices of glass and installation services.

Special Order Custom Design Mullion Doors

Contact QuikDrawers Sales for assistance with any designs below
(allow 3 business days for quotes)

Diamond	Double Diamond	Arched Lite	Double Arched Lite
Arched Lite with Horizontal Lite	Double Bow	Vesica	Double Bow Diamond
Hourglass Diamond	20Lite Double Diamond	Elliptical	X Lite
X Lite with Open Hub	X Lite with Solid Hub	X-Lite with Panel	Double X Lite
Double X Lite with Horizontal Lite	Triple X Lite	Triple X Lite with Horizontal Lite

Select Your Door Material

Alder	Alder, Knotty	Birch, White*	Cherry*
Cherry, Rustic	Maple, Hard*	Maple, Hard Rustic	Maple, Soft
Oak, Red*	Oak, Red, Qtr Sawn	Oak, Red, Rustic	Oak, White*
Oak, White, Qtr Sawn	Paint Grade Hard Maple	Hickory*	Hickory, Rustic
Pine, Knotty*	Walnut*
* Premium Grade is available

The next 2 steps will address the framing bead and framing edge choices for custom mullion doors.

Choose Your Framing Edge
(For all drawer front styles)

B No hinge boring Rabbet 7/16" deep 3/8" high	B-2* Hinge boring okay	C No hinge boring Rabbet 7/16" deep 3/8" high	C-2 No hinge boring	CFP No hinge boring
CFP-2* Hinge boring okay	E-2 No hinge boring	FEP** Finished End Panel Rabbet 11/16" deep 3/16" high	FP No hinge boring	H No hinge boring Rabbet 7/16" deep 3/8" high
H-2* Hinge boring okay	J-2 No hinge boring	L-034* Hinge boring okay	L-059* Hinge boring okay	L-061 No hinge boring
L-120 No hinge boring	L-149* Hinge boring okay	L-253 No hinge boring 5 degree back bevel	L-281* Hinge boring okay	L-297*² Hinge boring okay
L-304² No hinge boring	L-686 No hinge boring 5 degree back bevel	L-772 No hinge boring	L-803* Hinge boring okay	LC-2* Hinge boring okay
LC-Inset*² Hinge boring okay	Machine Edge* Hinge boring okay	PRS-2* Hinge boring okay	RC-2 No hinge boring	V-2 No hinge boring

Hinge Boring Options

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a compact style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 

• Doors 9" to 42" receive two bores
• Doors 42-1/16" to 72" receive three bores
• Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
• Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
• Custom boring is available at additional cost per door (contact customer service)
• Dowel inserts are not included with any door.  The dowel inserts come with the hinge or can be purchased separately.

For Face Frame Cabinets Using Compact Hinges
Compact Style Hinge for "A" boring
Compact hinge bore with dowel inserts Select ("A" with) Placement is 3" to center from top and bottom of door	Compact hinge bore without dowel inserts Select ("A" without) Placement is 3" to center from top and bottom of door
For Face Frame Cabinets Using Long Arm Hinges
Long Arm Style Hinge for "B" & "C" boring
Long Arm hinge bore with dowel inserts Select ("B" with) Placement is 3" to center from top and bottom of door	Long Arm hinge bore without dowel inserts Select ("B" without) Placement is 3" to center from top and bottom of door
For Frameless Cabinets Using Long Arm Hinges
Long arm hinge bore pattern with dowel inserts Select ("C" with) Placement is 3-3/4" to center from top and bottom of door	Long arm hinge bore pattern without dowel inserts Select ("C" without) Placement is 3-3/4" to center from top and bottom of door

Optional Hand or Finger Pulls

Back Side Routed Finger Pulls (priced per door)

(Click to enlarge)

Hand Pull Specifications: Hand pull routs are on the back side of the door and are minimally noticeable from a front view. Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC) Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide. Not available with the following edge profiles:  E-2, FP, L-253, L-304, L-686, L-947 and RC-2 Adds one day to lead time.

---

Special note about door sizing:

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

• Single panel up to 26" wide and 48" tall - 1/8"
• Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
• Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
• Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

Product Warranty Information

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

(Click on link or image above for measuring guide)

 

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” Packages. Oversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.