Unfinished 5-Piece MDF Drawer Fronts


Please Choose Or Scroll Down For More Info:












Starting at: $40.95  / Each

Add to Cart:

Product Description

Unfinished 5-Piece MDF cabinet drawer fronts

Design your own drawer fronts to match your doors and have them shipped, ready to finish

Lead time:  10-11 work days, excluding date of order
(All lead times are subject to variations in workload)

Your price will be calculated based on option selections and size
There is a minimum order of $25 for this manufacturer and if your order is less, there will be a $15 low order fee

The illustrations below represent typical drawer fronts.

Unfinished drawer fronts are 3/4" thick and are also available finished with your choice of Colourtones or Prism color coats and conversion varnish topcoat.  (see finishing specifications for details)

Our drawer fronts and cabinet doors can be shipped unfinished or you can choose from a wide variety of paint and glaze combinations. 



Design your Cabinet Drawer Fronts

Select model name/number below image

Standard Square Raised Panel Drawer Front TW10 Flat Panel Drawer Front TW10 Flat Panel Drawer Front
Standard Square Raised Panel Door Profile
7½" x 5-3/4" minimum w x h
1½" Rails & 2-5/16" Stiles
Slant raise shown
TW10 for flat panel doors and drawer fronts
7" x 3-7/8" minimum w x h
1½" Rails & 2-5/16" Stiles
Standard 1/4" MDF or P=057 panel only
 
TW-1038 Flat Panel Style Door
7" x 6-1/2" minimum w x h
2-5/16" Framing
3/8" Veneered MDF Core Panel 
CRP10 TW10 TW1038

(Cabinet doors and drawer fronts will have a minimum size charge of 1 square foot)


Select Your Drawer Front Material

Select Your Door Material

Standard Square Raised Panel Drawer Front 
3/4" MDF Only

The next 3 steps will address the framing bead, framing edge and panel raise choices for custom drawer fronts.  Slab Style fronts will require framing edge choice only.

Framing bead, framing edge and panel raise selections



Choose Your Framing Edge
(For all drawer front styles)

B-2 Framing Edge C-2 (L346 MDF) Framing Edge H-2 Framing Edge L-059 Framing Edge L-149 Framing Edge
B-2* C-2 H-2* L-059* L-149*
LC-2 Framing Edge Machine Framing Edge (L348) PRS-2 (L347 MDF) Framing Edge V-2 Framing Edge  
LC-2*

Machine Edge*

PRS-2* V-2  

*Indicates edge profiles which can be bored for concealed hinges.

Due to the nature of MDF, all surface edges will be slightly eased to prevent chipping and damage to the edges.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.


Choose Your Framing Bead

Framing Beads for Inside Frame


Choose Your Panel Raise Style
(For CRP10 only)

Cabinet Door Panel Options

Solid wood panels may be comprised of multiple pieces of wood joined together to achieve the necessary width.  Inverted panel IP115 is charged as raised panel plus the additional charge reflected above in the option menus.

Optional Panel Groove for CRP10 Drawer Front Style
(For CRP10 Only)

You must select the Reverse G-Cove from the Panel Raise Menu

G-012 Groove, 1-1/2" spacing from center to center
G-012
1½" spacing center to center

Groove width 1/4"
Groove depth 1/16"


Optional Hand or Finger Pulls

Back Side Routed Finger Pulls
(priced per door)
Fingerpull rout selections
(Click to enlarge)
Hand Pull Specifications:
 
  • Hand pull routs are on the back side of the door and are minimally noticeable from a front view.
  • Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC)
  • Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide.
  • Not available with the following edge profiles:  E-2, FP, L-253, L-304, L-686, L-947 and RC-2
  • Adds one day to lead time.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Special note about door sizing:

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

  • Single panel up to 26" wide and 48" tall - 1/8"
  • Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
  • Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
  • Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
  • Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

  • Up to 12" wide and 21-15/16" high - 1/8"
  • 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
  • Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
  • All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

 

Measuring for new or replacement cabinet doors and drawers
(Click on link or image above for measuring guide)