Unpainted 1-Piece MDF Cabinet Doors & Drawer Fronts
Your price will be calculated based on option selections and size

Due to lumber and construction market conditions, lead time:  7-8 weeks for production
(All lead times are subject to variations in workload)

There is a minimum order of $25 for this manufacturer and if your order is less, there will be a $15 low order fee

These MDF cabinet doors offer both round and square corner patterns in the center routing panel area.
The illustrations below represent typical cabinet doors.

Unfinished cabinet doors and drawer fronts are made of 3/4" MDF.  (see finishing specifications for details on our finishing program)

Our MDF cabinet doors and drawer fronts can also be shipped finished. 

Select Your Door Style

1-Piece MDF Door Styles
PAY ATTENTION TO WIDTH & HEIGHT MINIMUMS TO PREVENT DELAYS IN PROCESSING
(**Cabinet Doors & Drawer Fronts Will Have A Minimum Size Charge Of 1 Square Foot**)

		Door Minimum Width: 7 5/8" Door Minimum Height: 7 5/8" Door Framing Width: 2 5/16" 10RC DRAWER FRONT Drawer Front Minimum Width: 7 5/8" Drawer Front Minimum Height: 6" Drawer Front Vertical Frame Width: 2 5/16" Drawer Front Horizontal Frame Width: 1 3/16" 20RC
Door Minimum Width: 7 5/8" Door Minimum Height: 7 5/8" Door Framing Width: 2 5/16" 10SQ3 DRAWER FRONT Drawer Front Minimum Width: 7 7/8" Drawer Front Minimum Height: 5 3/4" Drawer Front Vertical Frame Width: 2 5/16" Drawer Front Horizontal Frame Width: 1 1/4" 20SQ3	Door Minimum Width: 7 5/8" Door Minimum Height: 7 5/8" Door Framing Width: 2 5/16" 10RC DRAWER FRONT Drawer Front Minimum Width: 7 5/8" Drawer Front Minimum Height: 6" Drawer Front Vertical Frame Width: 2 5/16" Drawer Front Horizontal Frame Width: 1 3/16" 30RC	Door Minimum Width: 7 5/8" Door Minimum Height: 7 5/8" Door Framing Width: 2 5/16" 10SQ3 DRAWER FRONT Drawer Front Minimum Width: 7 7/8" Drawer Front Minimum Height: 5 3/4" Drawer Front Vertical Frame Width: 2 5/16" Drawer Front Horizontal Frame Width: 1 1/4" 30SQ3

Choose Your Framing Edge
(For All Door Styles)

Select Your Framing Edge
Use this reference guide to find your framing edge (outer edge of the door). CONCEALED HINGE BORING:  Note the available "Hinge Boring/Hinge Type" options for each profile.  Be sure to select the correct "Hinge Boring" option when placing doors in your cart. (see "Step 6:" for boring details) INSET DOORS:  Inset doors fit INSIDE the cabinet opening.  Some profiles will not allow the door to operate correctly.  If your doors are "Inset" please select ONLY Frame Edges with the (²) designation.  These are the only Framing Edges available for inset applications.
	Profiles With NO Hinge Boring Options B NO Hinge Boring Not For Inset Doors C NO Hinge Boring Not For Inset Doors FP NO Hinge Boring Not For Inset Doors H NO Hinge Boring Not For Inset Doors L-061 NO Hinge Boring ​​​​​​​Not For Inset Doors L-401 NO Hinge Boring ​​​​​​​Not For Inset Doors PRS NO Hinge Boring ​​​​​​​Not For Inset Doors Machine Edge w/ Rabbet NO Hinge Boring ​​​​​​​Not For Inset Doors O NO Hinge Boring ​​​​​​​Not For Inset Doors Round-2 NO Hinge Boring ​​​​​​​Not For Inset Doors       Sophisticate NO Hinge Boring ​​​​​​​Not For Inset Doors V NO Hinge Boring ​​​​​​​Not For Inset Doors       Profiles With ALL Hinge Boring Options B-2 "A", "B" & "C" Hinge Boring ​​​​​​​Not For Inset Doors LC-2 "A", "B" & "C" Hinge Boring ​​​​​​​Not For Inset Doors LC-Inset² "A", "B" & "C" Hinge Boring Inset Doors OK L-034 "A", "B" & "C" Hinge Boring ​​​​​​​Not For Inset Doors L-059 "A", "B" & "C" Hinge Boring ​​​​​​​Not For Inset Doors L-149² "A", "B" & "C" Hinge Boring Inset Doors OK L-785 "A", "B" & "C" Hinge Boring Not For Inset Doors L-803 "A", "B" & "C" Hinge Boring Not For Inset Doors L-966 "A", "B" & "C" Hinge Boring Not For Inset Doors L-977 "A", "B" & "C" Hinge Boring Not For Inset Doors     Machine Edge "A", "B" & "C" Hinge Boring Not For Inset Doors PRS-2 "A", "B" & "C" Hinge Boring Not For Inset Doors V-2 "A", "B" & "C" Hinge Boring Not For Inset Doors
Profiles With LIMITED Hinge Boring Options C-2 "B" & "C" Hinge Boring Only Not For Inset Doors E-2 "B" & "C" Hinge Boring Only Not For Inset Doors H-2 "B" & "C" Hinge Boring Only Not For Inset Doors J-2 "B" & "C" Hinge Boring Only Not For Inset Doors L-686² "B" & "C" Hinge Boring Only 5° back bevel Inset Doors OK         L-1323² "B" & "C" Hinge Boring Only 5° back bevel Inset Doors OK
Some Edge Profiles Are NOT Recommended For Use With Euro, Demountable Or Inserta Style Hinges.  SEE HINGE BORING NOTES UNDER EACH PROFILE. Edges Displayed Above Are Computer Generated To Represent The Actual product As Closely As Possible But May Not Be Exact. If You Are Seeking An Exact Match, Contact Us For A Sample.

Choose Your Hinge Boring

Select Hinge Boring

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a Compact Style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call.

For FACE FRAME Style Cabinets

Compact Style Hinge "A" Boring For Compact Style Hinges Compact Hinge Bore With Dowel Inserts Select ("A" with) Placement Is 3" To Center From Top & Bottom Of Door Compact Hinge Bore Without Dowel Inserts Select ("A" without) Placement Is 3" To Center From Top & Bottom Of Door

Long Arm Style Hinges "B" Boring For Long Arm Style Hinges Long Arm Hinge Bore With Dowel Inserts Select ("B" with) Placement Is 3" To Center From Top & Bottom Of Door Long Arm Hinge Bore Without Dowel Inserts Select ("B" without) Placement Is 3" To Center From Top & Bottom Of Door

For FRAMELESS Style Cabinets Using Long Arm Hinges

Long Arm Style Hinges "C" Boring For Long Arm Style Hinges Long Arm Hinge Bore With Dowel Inserts Select ("C" with) Placement Is 3 3/4" To Center From Top & Bottom Of Door Long Arm Hinge Bore Without Dowel Inserts Select ("C" without) Placement Is 3 3/4" To Center From Top & Bottom Of Door Hinge Boring Standards Doors 8  13/16"h To 42"h Receive Two Bores Doors 42-1/16"h To 72"h Receive Three Bores Doors 72-1/16"h & Longer Receive Four Bores With Center Holes Set 25" In From Each End. *Custom Boring Locations (Vertically ONLY) Is Available At Additional Cost Per Door.  The Dimension From The Vertical Edge Cannot Be Changed As This Dimension Is Determined Specifically By The Hinge Type. (Contact Customer Service If You Need More Information - Read Line Below) (Select "Custom Boring (*Applicable Hinge Type)" In The Dropdown Menu) Dowel Inserts Are NOT Included With Any Door.  The Dowel Inserts Come With The Hinge Or Can Be Purchased Separately Hinge Boring Dimensional Specifications Bore Hole Is 35mm Diameter, 13.5mm Deep & The Insert Holes Are 8mm Diameter & 11.9mm Deep

Optional Hand/Finger Pull

Optional Back Side Routed Hand/Finger Pulls (Priced Per Door)

Hand/Finger Pull Specifications: Hand/Finger Pull Routs Are On The Back Side Of The Door & Are Minimally Noticeable From A Front View Specify Location: Bottom Left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) Or Top Center (TC) Rout Is 3-5/8" Wide & 3/8" Deep. When Specified As Right Or Left, The Rout Begins 3" From The Edge Of The Door Rout Is Centered On Doors Less Than 10" Wide Routing Not Available With The Following Edge Profiles:  (E-2), (FP), (L-253), (L-304), (L-686), (L-947) & (RC-2) Adds One Additional Day To Lead Time.

Need A Mid-Rail?
Adding A Mid-Rail Is Meant To Offer Additional Support To An Oversized Door, Drawer Front Or Panel, Which Will Help To Mitigate Door Warpage Due To The Overall Dimensions Of The Door, Drawer Front Or Panel. (See "Manufacturer's Product Warranty Information" Below For Acceptable Warpage Tolerances)
Horizontal Mid-Rails
Single Horizontal Mid-Rail	We Recommend Adding A SINGLE HORIZONTAL MID-RAIL When The Door/Panel Is Between 48" & 60" Tall And A DOUBLE HORIZONTAL MID-RAIL When The Door/Panel Is Between 60" & 96" Tall Doors Shorter Than 48" Do Not Typically Require A Mid-Rail.  You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.	Double Horizontal Mid-Rail
Vertical Mid-Rails
Doors
Single Vertical Mid-Rail	We Recommend Adding A SINGLE VERTICAL MID-RAIL When The Door Is Between 24" & 36" Wide We Recommend Adding A DOUBLE VERTICAL MID-RAIL When The Door Is Greater Than 36" Wide Doors Narrower Than 24" Do Not Typically Require A Mid-Rail.  You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.	Double Vertical Mid-Rail
Drawer Fronts
Typically, Drawer Fronts Will Not Require A Mid-Rail.  However, On Larger/Oversized Drawer Fronts, It Is Good Practice To Use A Mid-Rail When The Drawer Box Is Less Than Or Equal To 1/2 The Height Of The Drawer Front. You Are Welcome To Add One If That Is The Look You Are Trying To Achieve.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

• Single panel up to 26" wide and 48" tall - 1/8"
• Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
• Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
• Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

>

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” Packages. Oversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.