Custom Applied Molding Doors and Drawer Fronts

Select your applied molding doors or drawer fronts and wood specie below.  These custom applied moulding doors will suit the most discriminating tastes..

Due to lumber and construction market conditions, lead time:  7-8 weeks for production
(All lead times are subject to variations in workload)

Just follow the steps below to select the options for your new doors.

Choose your Cabinet Door Style or Drawer Front Style
Click on any image to enlarge
(Minimum Width x Height Shown Under Profile Image)

Barcelona	Churchill
Specifications as Shown Above: Panel Raise G-Cove Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in all wood species Minimum W x H 9-5/8" x 9-5/8" Drawer Front Design Barcelona Drawer Front Panel Raise Design Specific Drawer Front Min W x H 9-1/8" x 6-1/8"	Specifications as Shown Above: Panel Raise P-008 Framing Bead Ogee Edge Profile L-149 Specie Cherry Note:  Available in All wood species Minimum W x H 8-7/8" 8-7/8" Drawer Front Design Churchill Drawer Front Panel Raise Design Specific Drawer Front Min W x H 7-7/8" x 4-7/8"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

Cornwall	Cotswald
Specifications as Shown Above: Panel Raise Louie XIII Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Paint Grade, excludes All Rustic/Knotty Minimum W x H 7-1/2" x 7-1/2" Drawer Front Design Cornwall Drawer Front Panel Raise Louis XIII Drawer Front Min W x H 7-1/2" x 5-7/8"	Specifications as Shown Above: Panel Raise Slant Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Paint Grade Hard Maple, excludes All Rustic/Knotty Minimum W x H 7-1/2" x 7-1/2" Drawer Front Design Cotswald Drawer Front Panel Raise Slant Drawer Front Min W x H 7-1/2" x 5-7/8"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

CRP10797	CRP10772
Specifications as Shown Above: Panel Raise Reverse G-Cove Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in All species Minimum W x H 7" x 6-3/4" Drawer Front Design CRP10797 Drawer Front Panel Raise P-057 Drawer Front Min W x H 7" x 4"	Specifications as Shown Above: Panel Raise Slant Framing Bead Regular Edge Profile L-149 Specie Cherry Note:  Available in All wood species excludes All Rustic/Knotty Minimum W x H 7-1/2" x 7-1/2" Drawer Front Design CRP10772 Drawer Front Panel Raise Slant Drawer Front Min W x H 7-1/2" x 5-7/8"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

CRP10A48	Hancock
Specifications as Shown Above: Panel Raise Presidential Framing Bead Ogee Edge Profile L-149 Specie Cherry Note:  Available in All wood species, excludes All Rustic/Knotty Minimum W x H 9-3/8" x 9-3/8" Drawer Front Design CRP10A48 Drawer Front Panel Raise P-125 Drawer Front Min W x H 8-3/8" x 4-7/8"	Specifications as Shown Above: Panel Raise Presidential Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in All wood specie Minimum W x H 9" x 9" Drawer Front Design Hancock Drawer Front Panel Raise Design Specific Drawer Front Min W x H 7-7/8" x 5-1/8"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

Kingston Discontinued	LaSalle
Specifications as Shown Above: Panel Raise Presidential Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Paint Grade Hard Maple, excludes All Rustic/Knotty Minimum W x H 7-1/2" x 7-1/2" Drawer Front Design Kingston Drawer Front Panel Raise Presidential Drawer Front Min  W x H 7-1/2" x 5-7/8"	Specifications as Shown Above: Panel Raise M-Bead Framing Bead Design Specific Edge Profile Design Specific Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Red Oak, Paint Grade Hard Maple, excludes All Rustic/Knotty Minimum W x H 8-5/8" x 8-5/8" Drawer Front Design LaSalle Drawer Front Panel Raise P-057 Drawer Front Min W x H 4-7/8" x 4-7/8"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

Marquis	Monaco Discontinued
Specifications as Shown Above: Panel Raise Louie XIII Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Red Oak, Paint Grade Hard Maple, excludes All Rustic/Knotty Minimum W x H 8-7/8" x 8-7/8" Drawer Front Design Marquis Drawer Front Panel Raise P-057 Drawer Front Min W x H 4-7/8" x 4-7/8"	Specifications as Shown Above: Panel Raise M-Bead Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Paint Grade Hard Maple, excludes All Rustic/Knotty Minimum W x H 8-1/4" x 8-1/4" Drawer Front Design Monaco Drawer Front Panel Raise P-057 Drawer Front Min W x H 4-7/8" x 4-7/8"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

Newbury	Ridgemont
Specifications as Shown Above: Panel Raise M-Bead Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Paint Grade Hard Maple, excludes All Rustic/Knotty Minimum W x H 7-1/2" x 7-1/2" Drawer Front Design Newbury Drawer Front Panel  M-Bead Drawer Front Min W x H 7-1/2" x 5-7/8"	Specifications as Shown Above: Panel Raise   P-602 Framing Bead   Design Specific Edge Profile   L-149 Specie   Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Red Oak, White Oak, Paint Grade, Hickory, Pine and All Rustic/Knotty Minimum W x H   9" x 9" Drawer Front Design   Ridgemont Drawer Front Panel Raise   P-057 Drawer Front Min W x H   7-7/8" x 4-3/4"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

Royal	Saxony
Specifications as Shown Above: Panel Raise 1/4" Veneered Panel Framing Bead Design Specific Edge Profile Design Specific Specie Cherry Note:  Available in Cherry, Hard Maple, Red Oak, Paint Grade Hard Maple, excludes All Rustic/Knotty Drawer Front Minimum W x H 5-5/8" x 5-5/8" Drawer Front Design Royal Drawer Front Panel  Design Specific Drawer Front Min W x H 5-5/8" x 5-5/8"	Specifications as Shown Above: Panel Raise RM Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Soft Maple, Red Oak, Paint Grade Hard Maple, excludes All Rustic/Knotty Drawer Front Minimum W x H 7-1/2" x 7-1/2" Drawer Front Design Saxony Drawer Front Panel  P-057 Drawer Front Min W x H 4-3/8" x 4-3/8"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

TW101486	TW101547
Specifications as Shown Above: Panel Raise 1/4" Veneered Panel Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Hickory, Red Oak, White Oak, Paint Grade Hard Maple, Pine, Walnut and Qtr Sawn Oaks, excludes All Rustic/Knotty Minimum W x H 8-3/8" x 8-3/8" Drawer Front Design TW101486 Drawer Front Panel  Design Specific Drawer Front Min W x H 8-3/8" x 5-3/4"	Specifications as Shown Above: Panel Raise 1/4" Veneered Panel Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Hickory, Red Oak, White Oak, Paint Grade Hard Maple, Pine, Walnut and Qtr Sawn Oaks, excludes All Rustic/Knotty Minimum W x H 7-3/8" x 7-3/8" Drawer Front Design TW101547 Drawer Front Panel  Design Specific Drawer Front Min W x H 7-3/8" x 5-3/4"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

TW10164	Verona
Specifications as Shown Above: Panel Raise 1/4" Veneered Panel Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Alder, Birch, Cherry, Hard Maple, Hickory, Red Oak, White Oak, Paint Grade Hard Maple, Pine, Walnut and Qtr Sawn Oaks, excludes All Rustic/Knotty Minimum W x H 7" x 6-3/4" Drawer Front Design TW10164 Drawer Front Panel  Design Specific Drawer Front Min W x H 7" x 5-1/4"	Specifications as Shown Above: Panel Raise 1/4" Veneered Panel Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in All woods, excludes Soft Maple and all Rustic or Knotty Minimum W x H 7-1/4" x 7-1/4" Drawer Front Design Verona Drawer Front Panel  Design Specific Drawer Front Min W x H 7-1/4" x 5-5/8"
(Drawing may vary from picture above, see specifications above)	(Drawing may vary from picture above, see specifications above)

Versailles

Specifications as Shown Above: Panel Raise 1/4" Veneered Panel Framing Bead Design Specific Edge Profile L-149 Specie Cherry Note:  Available in Cherry, Hard Maple, Red Oak, Paint Grade Hard Maple, excludes All Rustic/Knotty Minimum W x H 5-5/8" x 5-5/8" Drawer Front Design Versailles Drawer Front Panel  Design Specific Drawer Front Min W x H 5-5/8" x 5-5/8"

(Drawing may vary from picture above, see specifications above)

Select Door or Drawer Front

Make a selection for whether you are ordering a cabinet door or the matching drawer front.
Default value is CABINET DOOR

Select Your Door Material

Alder	Alder, Knotty	Birch, White*	Cherry*
Cherry, Rustic	Maple, Hard*	Maple, Hard Rustic	Maple, Soft
Oak, Red*	Oak, Red, Qtr Sawn	Oak, Red, Rustic	Oak, White*
Oak, White, Qtr Sawn	Paint Grade Hard Maple	Hickory*	Hickory, Rustic
Pine, Knotty*	Walnut*
* Premium Grade is available.  Click here for more information about wood species and grades

Choose Your Framing Edge
(For all drawer front styles)

B No hinge boring Rabbet 7/16" deep 3/8" high	B-2* Hinge boring okay	C No hinge boring Rabbet 7/16" deep 3/8" high	C-2 No hinge boring	CFP No hinge boring
CFP-2* Hinge boring okay	E-2 No hinge boring	FEP** Finished End Panel Rabbet 11/16" deep 3/16" high	FP No hinge boring	H No hinge boring Rabbet 7/16" deep 3/8" high
H-2* Hinge boring okay	J-2 No hinge boring	L-034* Hinge boring okay	L-059* Hinge boring okay	L-061 No hinge boring
L-120 No hinge boring	L-149* Hinge boring okay	L-253 No hinge boring 5 degree back bevel	L-281* Hinge boring okay	L-297*² Hinge boring okay
L-304² No hinge boring	L-686 No hinge boring 5 degree back bevel	L-772 No hinge boring	L-803* Hinge boring okay	LC-2* Hinge boring okay
LC-Inset*² Hinge boring okay	Machine Edge* Hinge boring okay	PRS-2* Hinge boring okay	RC-2 No hinge boring	V-2 No hinge boring

* indicates edge profiles which can be bored for concealed hinges
² indicates a premium edge which will result in additional charge per door

Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.

Hinge Boring Options

If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a compact style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 

• Doors 9" to 42" receive two bores
• Doors 42-1/16" to 72" receive three bores
• Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
• Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
• Custom boring is available at additional cost per door (contact customer service)
• Dowel inserts are not included with any door.  The dowel inserts come with the hinge or can be purchased separately.

For Face Frame Cabinets Using Compact Hinges
Compact Style Hinge for "A" boring
Compact hinge bore with dowel inserts Select ("A" with) Placement is 3" to center from top and bottom of door	Compact hinge bore without dowel inserts Select ("A" without) Placement is 3" to center from top and bottom of door
For Face Frame Cabinets Using Long Arm Hinges
Long Arm Style Hinge for "B" & "C" boring
Long Arm hinge bore with dowel inserts Select ("B" with) Placement is 3" to center from top and bottom of door	Long Arm hinge bore without dowel inserts Select ("B" without) Placement is 3" to center from top and bottom of door
For Frameless Cabinets Using Long Arm Hinges
Long arm hinge bore pattern with dowel inserts Select ("C" with) Placement is 3-3/4" to center from top and bottom of door	Long arm hinge bore pattern without dowel inserts Select ("C" without) Placement is 3-3/4" to center from top and bottom of door

Optional Hand or Finger Pulls

Back Side Routed Finger Pulls (priced per door)

(Click to enlarge)

Hand Pull Specifications: Hand pull routs are on the back side of the door and are minimally noticeable from a front view. Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC) Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide. Not available with the following edge profiles:  E-2, FP, L-253, L-304, L-686, L-947 and RC-2 Adds one day to lead time.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Allowable tolerances for warpage and twist for five piece doors are:

• Up to 25-15/16" wide and 47-15/16" high - 1/8"
• Up to 25-15/16" wide and 48" to 64-15/16" high - 1/4"
• Up to 25-15/16" wide and 65" to 83-15/16" high - 5/16"
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 

(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” Packages. Oversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.