Unfinished Wood Custom Drawer Fronts

Item # 26740

Please Choose Or Scroll Down For More Info:

Starting at: $22.76  / Each

Add to Cart:

Product Description

Custom unfinished wood cabinet drawer fronts

Design your own drawer fronts to match your doors and have them shipped, ready to finish

Due to lumber and construction market conditions, lead time:  7-8 weeks for production
(All lead times are subject to variations in workload)

Your price will be calculated based on option selections and size
There is a minimum order of $25 for this manufacturer and if your order is less, there will be a $15 low order fee

The illustrations below represent typical drawer fronts.

Finished drawer fronts and cabinet doors are 3/4" thick and sanded with 220 grit prior to shipping.  (see finishing specifications for details)

Our drawer fronts and cabinet doors can also be shipped unfinished or you can choose from a wide variety of stain and glaze colors. 

Design your Cabinet Drawer Fronts
(Model numbers are listed below style pictures)

Select model name/number below image

Albany Shaker Drawer Front Slab Front
Standard Square Raised Panel Door Profile
7½" x 5-7/8" minimum w x h
1½" Rails & 2-5/16" Stiles
Slant raise shown
Standard Slab Style Drawer Front
3½" x 6" minimum w x h
66½" x 29" Maximum w x h
(horizontal grain)
Machine edge shown
CRP10 Slab
#10 Flat Panel Drawer Front Keystone Flat Panel Drawer Front

#10 drawer fronts
3" x 3" minimum w x h
Matches Slant raise
(Edge Profile L-149 Only)

Keystone drawer fronts
2¾" x 2¾" minimum w x h
Matches G-Cove raise
(Edge Profile L-149 Only)

#10 Keystone

 Grooved Panel Drawer Fronts
(Grooved Panels REQUIRE selection of Reverse G-Cove Panel Raise)

FSC Certified - Ardmore grooved panel door FSC Certified - Yardley grooved panel door
Ardmore grooved panel door profile
7" x 5-1/8" minimum w x h
1½" Rails & 2-5/16" Stiles
3/8" Reverse G-Cove raise shown
G-015 rout - 1½" spacing
Yardley grooved panel door profile
7" x 5-1/8" minimum w x h
2-5/16" Framing
3/8" Reverse G-Cove raise shown
G-012 rout - 1½" spacing 
Ardmore Yardley

Select Your Drawer Front Material

Standard Grade Alder Rustic Knotty Alder Standard Grade White Birch Standard Grade Cherry
Alder Alder, Knotty Birch, White* Cherry*
Rustic Knotty Cherry Standard Grade Hard Maple Rustic Knotty Hard Maple Paint Grade Hard Maple
Cherry, Rustic Maple, Hard* Maple, Hard Rustic Maple, Soft
Standard Grade Red Oak Standard Grade Quarter Sawn Red Oak Rustic Knotty Red Oak Standard Grade White Oak
Oak, Red* Oak, Red, Quarter Sawn Oak, Red, Rustic Oak, White*
Standard Grade Quarter Sawn White Oak Paint Grade Hard Maple Standard Grade Hickory Rustic Knotty Hickory
Oak, White, Quarter Sawn Paint Grade Hard Maple Hickory* Hickory, Rustic
Standard Grade Knotty Pine Standard Grade Walnut    
Pine, Knotty* Walnut*    
* Premium Grade is available

The next 3 steps will address the framing bead, framing edge and panel raise choices for custom drawer fronts.  Slab Style fronts will require framing edge choice only.

Framing bead, framing edge and panel raise selections

Choose Your Framing Edge
(For all drawer front styles)

B Framing Edge B-2 Framing Edge C Framing Edge C-2 Framing Edge CFP Framing Edge
No hinge boring
Rabbet 7/16" deep
3/8" high
Hinge boring okay
No hinge boring
Rabbet 7/16" deep
3/8" high
No hinge boring
No hinge boring
CFP-2 Framing Edge E-2 Framing Edge FEP Framing Edge FP Framing Edge H Framing Edge
Hinge boring okay

No hinge boring

Finished End Panel
Rabbet 11/16" deep
3/16" high
No hinge boring
No hinge boring
Rabbet 7/16" deep
3/8" high
H-2 Framing Edge J-2 Framing Edge L-034 Framing Edge L-059 Framing Edge L-061 Framing Edge
Hinge boring okay
No hinge boring
Hinge boring okay
Hinge boring okay
No hinge boring
L-120 Framing Edge L-149 Framing Edge L-253 Framing Edge L-281 Framing Edge L-297 Framing Edge
No hinge boring
Hinge boring okay
No hinge boring
5 degree back bevel
Hinge boring okay
Hinge boring okay
L-304 Framing Edge L-686 Framing Edge L-772 Framing Edge L-803 Framing Edge LC-2 Framing Edge
No hinge boring
No hinge boring
5 degree back bevel
No hinge boring
Hinge boring okay
Hinge boring okay
LC-2 Framing Edge RC-2 Framing Edge Machine Framing Edge PRS-2 Framing Edge RC-2 Framing Edge
Hinge boring okay
Machine Edge*
Hinge boring okay
Hinge boring okay
No hinge boring
No hinge boring
Finished end panel edge

* indicates edge profiles which can be bored for concealed hinges
² indicates a premium edge which will result in additional charge per door

Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.

Choose Your Framing Bead
(For 5 piece drawer fronts only)

Framing Beads for Inside Frame

Choose Your Panel Raise Style
(For 5 piece drawer fronts only)

Cabinet Door Panel Options

Solid wood panels may be comprised of multiple pieces of wood joined together to achieve the necessary width.  Inverted panel IP115 is charged as raised panel plus the additional charge reflected above in the option menus.  Doors 45" tall and greater will have a center rail installed (RP120) to help prevent warpage (unless otherwise specified).

Panel Choices If Selecting Grooved Doors
(For Ardmore, Woodford and Yardley Only)

You must select the Reverse G-Cove from the Panel Raise Menu

G-012 Groove, 1-1/2" spacing from center to center G-121 Groove, 1-1/2" spacing from center to center G-015 Groove, 1-1/2" spacing from center <br>to center
1½" spacing center to center

Groove width 1/4"
Groove depth 1/16"
1½" spacing center to center

Groove width 1/4"
Groove depth 1/8"

¾" or 1½" spacing center to center
Groove width 3/32"
Groove depth 3/64"

Raius Corners and Hand or Finger Pulls

Radius Corners
(priced per item)
Radius corners for doors and drawer fronts

Radius Corners

  • Charged per door or front
  • Specify 1/8", 1/4", 1/2" or 1" radius
  • Available with B-2, C-2, CFP-2, H-2, L-059, L-149, L-281, L-772, L-1160, LC-2, Machine Edge, PRS-2 and V-2 edge profiles only
Back Side Routed Finger Pulls
(priced per door)
Fingerpull rout selections
(Click to enlarge)
Hand Pull Specifications:
  • Hand pull routs are on the back side of the door and are minimally noticeable from a front view.
  • Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC)
  • Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide.
  • Not available with the following edge profiles:  E-2, FP, L-253, L-304, L-686, L-947 and RC-2
  • Adds one day to lead time.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Special note about door sizing:

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

  • Single panel up to 26" wide and 48" tall - 1/8"
  • Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
  • Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
  • Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
  • Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

  • Up to 12" wide and 21-15/16" high - 1/8"
  • 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
  • Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
  • All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products.  Be sure to read and understand the instructions provided by your finish manufacturer.  You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen.  By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way.  Your custom cabinet doors are available in a great selection  of wood species which you will finish with your chosen stain, paint or finish. 

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer. 


Measuring for new or replacement cabinet doors and drawers
(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” PackagesOversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.