RED OAK Custom Length Wood Floating Shelves (Unfinished)

Sleek & Versatile, Floating Shelves Are A Modern Design Element Gaining Popularity, Well Beyond The Kitchen.  Use Them For Clean-Lined Storage In The Kitchen Or Bath Or To Display Treasured Family Pictures & Accessories In All Areas Of The Home.  

Details

Each Floating Shelf Consists Of An Inner Support Frame & An Outer Shelf That Slides Into Place Over The Support Frame, The Two Pieces Are Not Sold Individually.

• Shelf:
  • Available In Custom Lengths Between 24" & 60"
  • The Front & Sides Of The Shelf Are Made From 3/4" Solid Wood Red Oak, Mitered At The Two Front Corners
  • The Shelf Top & Bottom Is 3/8" Thick Red Oak Plywood
  • Shelf Thickness/Height Is 2-1/2"
  • Shelf Depth Is 10"
• Support Frame:
  • Manufactured using 3/4" thick unselected hardwoods.
• IMPORTANT NOTES ABOUT INSTALLATION:
  • It Is Imperative That Floating Shelves Be Mounted/Secured To Two Or More Wall Studs Using Four Or More Course Thread Screws At Least 2-1/2" Long. (3" Washer Head Cabinet Screws Can be Added In Drop Down Above)
    • **60" Floating Shelves Should Be Mounted To Three Or More Studs**
  • Maximum Load Capacity For The Shelf & Support Frame Is 10lbs Per Lineal Foot, When Properly Installed With Two Or More High Quality Installation Screws Per Stud.
  • Once The Floating Shelf Is Fully Installed, It Is Recommended That The Shelf Be Secured To The Support Frame Using Headless Pins Or Small Finishing Nails So The Shelf Cannot
    Inadvertently Slide Off Of The Support Frame.

While Floating shelves Are Built From Strong, Sturdy Materials, The Load Capacity Of These Shelves Is Greatly Dependent On The Quality Of The Installation Screws & Whether The Shelves Are Secured Into The Wall Studs.  If Not Secured Into Two Or More Studs Using High Quality Installation Screws, The Shelf May Not Support The Desired Weight.  We Will Not Be Responsible For Shelf Failure Due To Inadequate Installation Techniques Or Materials.