Blum 110 Degree Soft-Close Hinge w/Blumotion

Item #27473

Please Choose Or Scroll Down For More Info:




Starting at:$2.85 / Each

Add to Cart:
Product Description

Blum 110 Degree Soft-Close Clip On Hinge

Blum Self-Closing 110 degree hinge B071T3550

Features

  • Can be used with new Blumotion hinges
  • New geometry for door thicknesses up to 1"
  • Deactivation switch for small or lightweight doors
  • New Inserta design
  • For door overlays up to 22mm
  • Cup boring depth of 13mm
  • New insertion ram needed BMZM.0040 for press-in
  • Do not use rubber mallet to insert press-in hinges
  • Compatible with existing Clip mounting plates and hinge arm cover caps

Faceframe Applications

  • 1/4" overlay - Hinge B071B3650 and Mounting Plate B175H6000
  • 1/2" overlay - Hinge B071B3550 and Mounting Plate B175H6030
  • Full overlay - Hinge B071B3550 and Mounting Plate B175H6000
  • Inset doors - Hinge B071B3650 and Mounting Plate B175H5030.21

Frameless Applications

  • 1/4" overlay - Hinge B071B3650 and Mounting Plate B175H710
  • 1/2" overlay - Hinge B071B3550 and Mounting Plate B175H713
  • Full overlay - Hinge B071B3550 and Mounting Plate B175H710
  • Inset doors - Hinge B071B3750 and Mounting Plate B175H719

Specifications

  • Color: Nickel
  • Opening Degree: 110 deg
  • Hinge Cup Size: 35 mm

Do I need Press-on or Screw-on hinges?

Standard hinge installation screws work well in solid wood stock and plywood, but screws lose strength in medium density fiberboard (MDF) or particleboard. If your cabinet doors or cases are made from these materials, you may want to choose hinges that include barbed plastic inserts that fit in predrilled holes. Tightening the installation screw pushes each dowel against the wall of the hole for a firm grip.
Back side of press-on hinge - note the dowels Back side of screw-on hinge - no dowels
Picture of press-on type hinge, back side Picture of screw-on type hinge, back side
Cabinet door prepared for press-on hinges Cabinet door prepared for screw-on hinges
Picture of reverse side of cabinet door, prepared for press-on type hinge, note the additional dowel holes bored next to the mortise cup Picture of reverse side of cabinet door, prepared for screw-on type hinge, there is only the mortise cup bored
Note:  The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes.  The dowels in that case are already mounted.  If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.

Click here to order the mounting plates

Sold each
Model B071B3xxx

Minimum order 2 

"How to" page for calculating hinge overlay