Custom Sized Unfinished Louver Cabinet Doors

Item #26747


Please Choose Or Scroll Down For More Info:















Starting at: $121.08 / Each

Add to Cart:

Product Description

Custom Sized Unfinished "Solid" Or "Open" Louver Cabinet Doors

Current Lead Time:  12-14 Business Days For Production
(All lead times are subject to variations in workload)

Choose Your Louvered Door Style
"Solid" Louver Door
(Available Unfinished or Painted)
"Open" Louver Door
(Available Unfinished Only)
Custom Wood Solid Louver Cabinet Door
(Shown In Walnut)
Custom Wood Individual Louver Cabinet Door
(Shown In Walnut)
Door Specifications
Louvered Doors With The "Closed" Louver Look
Air & Light Will Not Pass Through The Door
Built With Solid Wood Outer Frames & Solid Wood "Louvered Panel" Center Panel Staves (See Crosscut Image Below)
Louvered Doors With The "Open" Louver Look & Purpose
Air & Light Will Pass Through The Door
Built With Solid Wood Outer Frames & Solid Wood "Louver Strip" Center Panel (See Crosscut Image Below)
Custom Wood Solid Louver Cabinet Door
(("B")Slat Width Appearance From The Face View = 1.531")
Custom Wood Individual Louver Cabinet Door
(("B" & "D") Louver Size Is 1.095" Wide x .36" Thick, Spaced At .36" Between Louvers)
Dimensional Specifications
"Solid" Louver Door "Open" Louver Door
Minimum Door Width 7  1/2" Minimum Door Width 7  1/2"
Minimum Door Height
(See Step 4 Below For Hinge Boring Options)
7  1/2" For "NO" Hinge Boring
8 13/16" For "A" & "B" Hinge Boring
10" For "C" Hinge Boring
Minimum Door Height
(See Step 4 Below For Hinge Boring Options)
7  1/2" For "NO" Hinge Boring
8 13/16" For "A" & "B" Hinge Boring
10" For "C" Hinge Boring
Center Panel Raise N/A Center Panel Raise N/A
Inner Frame Edge Design Specific (Cannot Be Changed) Inner Frame Edge Design Specific (Cannot Be Changed)
Outer Frame Edge Options Available (Image Above Shows "Machine Edge") Outer Frame Edge Options Available (Image Above Shows "Machine Edge")
Grain Direction N/A Grain Direction N/A
Outer Frame Width Specifications
"Solid" Louver Door "Open" Louver Door
Stiles (Vertical Frame Pieces) 2  1/4" Default (Can Be Changed)
IMPORTANT NOTE: (2  1/8" Minimum With Hinge Boring)
Stiles (Vertical Frame Pieces) 2  1/4" Default (Can Be Changed)
IMPORTANT NOTE: (2  1/8" Minimum With Hinge Boring)
Rails (Horizontal Frame Pieces) Varies - 2" Thru 2  13/16" On Visible Face Surface
(Based On Overall Door Height)
Rails (Horizontal Frame Pieces) Varies - 2  1/8" Thru 2  15/16" On Visible Face Surface
(Based On Overall Door Height)
Mid-Rail Width Equal To Top & Bottom Rail Widths** Mid-Rail Width Equal To Top & Bottom Rail Widths**
**Based On The Overall Height Of The Door, Sometimes The Midrail Width Cannot Be Exactly Equal To The Top & Bottom Rails.
By Default, We Will Work To Match The Midrail Dimension ToThe Top & Bottom Rail Dimension.**


Select Your Wood Species
* Premium Grade Available 
Standard Grade Alder Standard Grade White Birch Standard Grade Cherry Standard Grade Hard Maple
Alder Birch, White* Cherry* Maple, Hard*
Standard Grade Hickory Standard Grade Red Oak
Hard Maple, Paint Grade Hickory* Oak, Red* Oak, White*
Standard Grade Walnut      
Walnut*        

Choose Your Framing Edge
The next step will address the framing edge choices for custom louvered doors.

Framing bead, framing edge and panel raise selections

Your Framing Edge Guide
B Framing Edge B-2 Framing Edge C Framing Edge C-2 Framing Edge CFP Framing Edge
B
No hinge boring
Rabbet 7/16" deep
3/8" high
B-2*
Hinge boring okay
C
No hinge boring
Rabbet 7/16" deep
3/8" high
C-2
No hinge boring
CFP
No hinge boring
CFP-2 Framing Edge E-2 Framing Edge FEP Framing Edge FP Framing Edge H Framing Edge
CFP-2*
Hinge boring okay

E-2
No hinge boring

FEP**
Finished End Panel
Rabbet 11/16" deep
3/16" high
FP
No hinge boring
H
No hinge boring
Rabbet 7/16" deep
3/8" high
H-2 Framing Edge J-2 Framing Edge L-034 Framing Edge L-059 Framing Edge L-061 Framing Edge
H-2*
Hinge boring okay
J-2
No hinge boring
L-034*
Hinge boring okay
L-059*
Hinge boring okay

 

L-061
No hinge boring

L-297 Framing Edge L-149 Framing Edge L-253 Framing Edge L-281 Framing Edge L-120 Framing Edge

L-297*
Hinge boring okay

Premium Edge Profile (+18.90)

L-149*
Hinge boring okay
L-253
No hinge boring
5 degree back bevel
L-281*
Hinge boring okay

L-120
No hinge boring

L-304 Framing Edge L-686 Framing Edge L-772 Framing Edge L-803 Framing Edge LC-2 Framing Edge

L-304
No hinge boring

Premium Edge Profile (+18.90)

L-686
No hinge boring
5 degree back bevel
L-772
No hinge boring
L-803*
Hinge boring okay
LC-2*
Hinge boring okay
LC-2 Framing Edge RC-2 Framing Edge Machine Framing Edge PRS-2 Framing Edge RC-2 Framing Edge

LC-Inset*
Hinge boring okay

Premium Edge Profile (+18.90)

Machine Edge*
Hinge boring okay
PRS-2*
Hinge boring okay
RC-2
No hinge boring
V-2
No hinge boring
Finished end panel edge

* indicates edge profiles which can be bored for concealed hinges

Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.


Select Hinge Boring
If you intend to use a concealed European style hinge, here are your boring options.  We normally recommend a Compact Style hinge if you have "Face Frame" style cabinets.  If you have any questions, just give us a call. 
For FACE FRAME Style Cabinets
Compact Style HingeCompact style hinge for Boring type "A"
"A" Boring For Compact Style Hinges
Hinge bore pattern for compact hinge with dowel inserts
Hinge bore pattern for compact hinges without dowel inserts
Compact Hinge Bore With Dowel Inserts
Select ("A" with)
Placement Is 3" To Center From Top & Bottom Of Door
Compact Hinge Bore Without Dowel Inserts
Select ("A" without)
Placement Is 3" To Center From Top & Bottom Of Door
Long Arm Style HingesLong arm style hinge for hinge boring type "B" & "C"
"B" Boring For Long Arm Style Hinges
Hinge bore pattern for long arm hinge with dowel inserts for face frame cabinets
Hinge bore pattern for long arm hinge without dowel inserts for face frame cabinets
Long Arm Hinge Bore With Dowel Inserts
Select ("B" with)
Placement Is 3" To Center From Top & Bottom Of Door
Long Arm Hinge Bore Without Dowel Inserts
Select ("B" without)
Placement Is 3" To Center From Top & Bottom Of Door
For FRAMELESS Style Cabinets Using Long Arm Hinges
Long Arm Style HingesLong arm style hinge for hinge boring type "B" & "C"
"C" Boring For Long Arm Style Hinges
Hinge bore pattern for long arm hinge with dowel insert holes
Hinge bore pattern for long arm hinge without dowel insert holes
Long Arm Hinge Bore With Dowel Inserts
Select ("C" with)
Placement Is 3 3/4" To Center From Top & Bottom Of Door
Long Arm Hinge Bore Without Dowel Inserts
Select ("C" without)
Placement Is 3 3/4" To Center From Top & Bottom Of Door
Hinge Boring Standards
Doors 8  13/16"h To 42"h Receive Two Bores
Doors 42-1/16"h To 72"h Receive Three Bores
Doors 72-1/16"h & Longer Receive Four Bores With Center Holes Set 25" In From Each End.

*Custom Boring Locations (Vertically ONLY) Is Available At Additional Cost Per Door.  The Dimension From The Vertical Edge Cannot Be Changed As This Dimension Is Determined Specifically By The Hinge Type.
(Contact Customer Service If You Need More Information - Read Line Below)
(Select "Custom Boring (*Applicable Hinge Type)" In The Dropdown Menu)

Dowel Inserts Are NOT Included With Any Door.  The Dowel Inserts Come With The Hinge Or Can Be Purchased Separately
Hinge Boring Dimensional Specifications
Bore Hole Is 35mm Diameter, 13.5mm Deep & The Insert Holes Are 8mm Diameter & 11.9mm Deep

Choose Your Other Options

  Your "Other Options" Guide
Add Mid-Rail(s)
Adding mid-rail(s) to Louvered Doors
(click to enlarge)

Why Add a Mid-Rail?

The addition of the midrails will assist in avoiding any door warpage or twist.

Read the warranty size information below for additional details about your warrranty protection.

Back Side Routed Finger Pulls
(priced per door)
Fingerpull rout selections
(Click to enlarge)

Hand Pull Specifications:

  • Hand pull routs are on the back side of the door and are minimally noticeable from a front view.
  • Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL),    Top Right (TR) or Top Center (TC)
  • Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide.
  • Not available with the following edge profiles: E-2, FP, L-253, L-304, L-686, L-947 and RC-2.

Product Warranty Information

Information about Conestoga product and finishing warranties.

Special note about door sizing:

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

  • Single panel up to 26" wide and 48" tall - 1/8"
  • Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
  • Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
  • Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
  • Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

  • Up to 12" wide and 21-15/16" high - 1/8"
  • 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
  • Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
  • All three piece products over 30" wide and 14" high are not warranted

Finishing Notes

**When ordering unfinished, doors should be properly prepared prior to applying any finishing products. Be sure to read and understand the instructions provided by your finish manufacturer. You may need to perform additional sanding to prepare your products for finishing.**

Measuring for new or replacement cabinet doors and drawers
(Click on link or image above for measuring guide)

Warranty Information

We warrant that all of our products are free from defects in material and workmanship for a period of one year from the date of shipment. Natural characteristics found in wood will not be considered defects. Wood will expand and contract in accordance with its environment. Please call for specific warranty information. Photography on this site is for illustration purposes only. Actual wood color and finish may vary slightly due to the electronic rendering process. For accurate color selection, we recommend that you obtain a product sample. Conestoga Wood Specialties reserves the right to change or modify our products as part of its ongoing product development.

Special Handling Charges For Oversize Products

Shipping Companies Do Charge Extra For "Oversize" Packages Or Packages That Exceed Certain Lengths Or Other Measurements.

If Your Product Is Going To Incur Additional Charges, We Will Get A Shipping Quote Prior To Finalizing Your Order.  The Shipping Shown On Your Order May Or May Not Include These "Oversize" Charges.  We Will Notify You Prior To Placing Your Order In Production.

FedEx Oversize Packages

Packages That Weigh 150 Pounds Or Less & Exceed 108 Inches In Length Or 130 Inches In "Girth" ((2 x width) + (2 x height)) Are Considered “Oversize” PackagesOversize Packages Are Rated Based On The Greater Of The Package's Actual Rounded Weight Or Dimensional Weight. All Oversize Packages Will Have A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As of 2020, This Surcharge Will Be $120 Per Oversize Package.

Fedex Peak Oversize Package Surcharge

During Peak Shipping Season (10/21/xx until 1/5/xx), Any Package Shipped During This Period Will Incur An Additional "Peak Oversize" Charge Of $37.50 Per Oversize Package.

UPS Oversize Packages

A Large Package Surcharge Will Be Applied To Each UPS Package When Its Length Plus "Girth" ((2 x width) + (2 x height)) Combined Exceeds 130 Inches, But Does Not Exceed The Maximum UPS Size Of 165 Inches. Large Packages Are Subject To A Minimum Billable Weight Of 90 Pounds In Addition To Any Oversize Package Surcharge(s).  As Of 2020, This Surcharge Will Be $115 Per Oversize Package.

Address Changes For FedEx & UPS

Both FedEx & UPS Charge For Address Changes & Corrections.  The Charge For An Address Change Is A Minimum Of $16.00 As Of 1/1/2019.  Please Check Your Shipping Address On Your Order Confirmation To Insure That It Is Correct.  The Cabinet Guy/QuikDrawers Is NOT Responsible For Incorrect Addresses.

If You Have Any Specific Questions, Let Us Know Or Refer Directly To The Carrier Websites For More Information.