Compact Soft-Close Hinge 1/2" Overlay

Item # 27845


Please Choose Or Scroll Down For More Info:



$3.53  / Each

Add to Cart:

Product Description

1/2" Overlay Compact Soft-Close Concealed Hinge

105 Degree Compact Hinge with 6 Way Adjustment
With dowels for Press-In applications

1/2" overlay press-in hinge for refacing

  • 105 degree opening angle, 6 way adjustable
  • Built-in soft-close damper mechanism is hidden from view 
  • One piece compact assembly with vertical, horizontal and depth cam adjustment
  • Cold rolled steel construction and zinc die cast plate with nickel plating
  • Die cast face frame plate securely grasps the face frame and provides two attachment points
  • #6 x 5/8" pan-head wood screws recommended for plate installation
  • Guaranteed to surpass all ANSI, BHMA & KCMA requirements
  • Face frame application only
  • With Dowels

Do I need Press-on or Screw-on hinges?

Back side of press-on hinge - note the dowels Back side of screw-on hinge - no dowels
Picture of press-on type hinge, back side Picture of screw-on type hinge, back side
Cabinet door prepared for press-on hinges Cabinet door prepared for screw-on hinges
Picture of reverse side of cabinet door, prepared for press-on type hinge, note the additional dowel holes bored next to the mortise cup Picture of reverse side of cabinet door, prepared for screw-on type hinge, there is only the mortise cup bored
Note:  The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes.  The dowels in that case are already mounted.  If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.

Boring information:

Bore or "Tab" location is 5mm from edge.  Pattern shown below is for use with dowels.  Use same pattern without the smaller dowel holes for hinges using wood screws.

Hinge boring pattern for 22855 hinge
(Click to enlarge)

22855-9SFT

Sold Each

Minimum order 4 hinges

"How to" page for calculating hinge overlay

Questions? Visit the Cabinet Hinge Glossary