Concealed Heavy Duty Cabinet Door Hinge

Finally!  A heavy duty clip on hinge cabinet door hinge that is priced right and is easy to install.

If you are installing clip on hinges on commercial casework style cabinets, this is perfect for those heavy casework doors, and these offer twice the life!

Check out these great benefits:

• 110° opening angle
• Hinge and plate together provide 6 way adjustment (3 dimensional)--900 series
• Clip-on base plates available for a wide variety of European and face frame applications
• Cam adjustable plates allow full cam adjustment
• Cold rolled steel construction with nickel plating
• Tested beyond 100,000 cycles - Guaranteed to surpass all ANSI, BHMA & KCMA requirements

Mounting plates are conveniently offered with the hinges:

Cast Face Frame Mounting Plate	Steel Face Frame Mounting Plate

Choose from below for Face Frame Style cabinets:

• 0mm for full overlay (600.3553.65) Face frame cabinet
• 3mm for 1/2" overlay (600.3554.65) Face frame cabinet
• 0mm steel for full overlay (600.3456.65) Face frame cabinet
• 3mm steel for 1/2" overlay (600.3457.65) Face frame cabinet

Choose from below for Frameless or Euro Style cabinets:

• 0mm with 0mm crank for full overlay (600.0R23.05)
• 0mm with 9mm crank for 3/8" overlay (600.0R22.05)
• 0mm with 15mm crank for inset doors (600.0R22.05)
• Combine the 9mm crank hinge with the 0mm plate for 1/4" overlay
• Use 15mm crank hinge with the 0mm plate for an inset hinge

Do I need Press-on or Screw-on hinges? Standard hinge installation screws work well in solid wood stock and plywood, but screws lose strength in medium density fiberboard (MDF) or particleboard. If your cabinet doors or cases are made from these materials, you may want to choose hinges that include barbed plastic inserts that fit in predrilled holes. Tightening the installation screw pushes each dowel against the wall of the hole for a firm grip.
Back side of press-on hinge - note the dowels	Back side of screw-on hinge - no dowels
Cabinet door prepared for press-on hinges	Cabinet door prepared for screw-on hinges
Note:  The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes.  The dowels in that case are already mounted.  If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.

All hinges come with dowels, which may be removed if not needed.

Mounting plates may be purchased with hinges above (use pull-down menu)

Sold each

Minimum order 2

"How to" page for calculating hinge overlay

Questions? Visit the Cabinet Hinge Glossary

Cast Face Frame Mounting Plate	Steel Face Frame Mounting Plate