Original Jfh Clip On Or Long Arm Hinge

Concealed Screw-on hinge for frameless or face frame cabinets

These are original Jfh long arm hinge.  Jfh was widely used in the cabinet industry for many years and were installed in countless kitchen cabinets. 

We have these "hard to find" Jfh hinges and we offer them as direct replacements for your Jfh hinge.

These full overlay 110° hinges with their mounting plates (sold separately) can be used in either a frameless cabinet or on face frame cabinet .  These high quality hinges just clip on to the mounting plates which are mounted on the cabinet.  This makes placement and removal of the doors extremely convenient.  Our Lama hinge plates are a great replacement and are available in 0, 3 and 6mm thicknesses.

This Jfh hinges is the screw on model.  If you need "press in dowels" for mounting, you can add them in the pulldown menu at the top of the page.  Dowels include the special screws and both dowels and screws are shipped loose.

Do I need Press-on or Screw-on hinges? Standard hinge installation screws work well in solid wood stock and plywood, but screws lose strength in medium density fiberboard (MDF) or particleboard. If your cabinet doors or cases are made from these materials, you may want to choose hinges that include barbed plastic inserts that fit in predrilled holes. Tightening the installation screw pushes each dowel against the wall of the hole for a firm grip.
Back side of press-on hinge - note the dowels	Back side of screw-on hinge - no dowels
Cabinet door prepared for press-on hinges	Cabinet door prepared for screw-on hinges
Note:  The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes.  The dowels in that case are already mounted.  If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.

To determine mounting plate size:

0mm = 3/4" overlay(amount that the cabinet door overlaps the opening) using our full overlay hinge, 3/8" using a half overlay hinge (May be marked as 244.3653 on underside)

3mm = 1/2" overlay(amount that the cabinet door overlaps the opening) using our full overlay hinge, 5/16" using a half overlay hinge (May be marked as 244.3654 on underside)

6mm = 3/8" overlay(amount that the cabinet door overlaps the opening) using our full overlay hinge, 1/4" using a half overlay hinge (May be marked as 244.3655 on underside)

-OR-
You can measure the thickness of the plate like this:

0MM	3MM	6MM
1/4" thick	3/8" thick	1/2" thick

Screws are not  included but may be added above

Mounting plates and screws are sold seperately and may be selected above.

This hinge requires a mounting plate.

Mounting plates and screws are sold seperately.

Sold each

Minimum order 4

"How to" page for calculating hinge overlay

Questions? Visit the Cabinet Hinge Glossary