Custom Stained Solid or Open Louver
Cabinet Doors

                                                                                   DUE TO LUMBER AND CONSTRUCTION MARKET CONDITIONS, LEAD TIME APPROX 8 WEEKS---SUBJECT TO WORKLOAD VARIATIONS

Choose your design and have them shipped finished, ready to install

Custom stain matching service is available, just contact Customer Service

Lead time: 15-17 work days, excluding date of order
(All lead times are subject to variations in workload)

Consider ordering a sample of your finish color/wood combination. Please view the color images and/or order a sample of your preferred color, do not ask us to select or recommend a matching or similar color.

Start by viewing and selecting your options below, then just use the menus above to select those options and click on the "add to cart" button to see the final price of your door.

Choose Your Door Style

7 ½" x 7 ½" min Stiles - 2-5/16" framing Slat width appearance is 1.531" Rail width varies from 2" to 2-13/16" depending on height of door	7 ½" x 7 ½" min Stiles - 2-5/16" framing Top rail 2-5/16" on face Bottom rail varies from 2-1/8" to 2-15/16" on face Louver size is 1.095" wide x .36" thick, spaced at .36" between louvers
"Solid" Louver Door Available Finished or Unfinished	"Open" Louver Door Available Unfinished Only

Select Your Door Material and Finish
Click On A Wood Type To See Stain & Glaze Choices

Alder	Birch, White*	Cherry*	Maple, Hard*
Maple, Soft	Oak, Red*	Oak, White*	Hickory*
Walnut*
* Premium Grade is available

See the
Select An Optional Glaze Color

The next step will address the framing edge choices for custom louvered doors.

Choose Your Framing Edge
(For all drawer front styles)

B No hinge boring Rabbet 7/16" deep 3/8" high	B-2* Hinge boring okay	C No hinge boring Rabbet 7/16" deep 3/8" high	C-2 No hinge boring	CFP No hinge boring
CFP-2* Hinge boring okay	E-2 No hinge boring	FEP** Finished End Panel Rabbet 11/16" deep 3/16" high	FP No hinge boring	H No hinge boring Rabbet 7/16" deep 3/8" high
H-2* Hinge boring okay	J-2 No hinge boring	L-034* Hinge boring okay	L-059* Hinge boring okay	L-061 No hinge boring
L-120 No hinge boring	L-149* Hinge boring okay	L-253 No hinge boring 5 degree back bevel	L-281* Hinge boring okay	L-297*² Hinge boring okay
L-304² No hinge boring	L-686 No hinge boring 5 degree back bevel	L-772 No hinge boring	L-803* Hinge boring okay	LC-2* Hinge boring okay
LC-Inset*² Hinge boring okay	Machine Edge* Hinge boring okay	PRS-2* Hinge boring okay	RC-2 No hinge boring	V-2 No hinge boring

* indicates edge profiles which can be bored for concealed hinges
² indicates a premium edge which will result in additional charge per door

Some edge profiles are NOT recommended for use with Euro, demountable or Inserta style hinges, note hinge boring notes under each profile.

Edges displayed above are computer generated to represent the actual product as closely as possible but may not be exact.  If you are seeking an exact match, contact us for a sample.

Choose Hinge Boring Options

If you intend to use a concealed European style hinge, here are your boring options. We normally recommend a compact style hinge if you have "Face Frame" style cabinets. If you have any questions, just give us a call.

• Doors 9" to 42" receive two bores
• Doors 42-1/16" to 72" receive three bores
• Doors 72-1/16" and longer receive four bores with center holes set 25" in from each end.
• Bore hole is 35mm diameter, 13.5mm deep and the insert holes are 8mm diameter and 11.9mm deep
• Custom boring is available at additional cost per door (contact customer service)
• Dowel inserts are not included with any door.  The dowel inserts come with the hinge or can be purchased separately.

For Face Frame Cabinets Using Compact Hinges
Compact Style Hinge for "A" boring
Compact hinge bore with dowel inserts Select ("A" with) Placement is 3" to center from top and bottom of door	Compact hinge bore without dowel inserts Select ("A" without) Placement is 3" to center from top and bottom of door
For Face Frame Cabinets Using Long Arm Hinges
Long Arm Style Hinge for "B" & "C" boring
Long Arm hinge bore with dowel inserts Select ("B" with) Placement is 3" to center from top and bottom of door	Long Arm hinge bore without dowel inserts Select ("B" without) Placement is 3" to center from top and bottom of door
For Frameless Cabinets Using Long Arm Hinges
Long arm hinge bore pattern with dowel inserts Select ("C" with) Placement is 3-3/4" to center from top and bottom of door	Long arm hinge bore pattern without dowel inserts Select ("C" without) Placement is 3-3/4" to center from top and bottom of door

Choose Your Other Options

Add Mid-Rail(s)
(click to enlarge)	Why Add a Mid-Rail? The addition of the midrails will assist in mitigating any door warpage or twist.  The addition of multiple hinges based on height of the door will also help with mitigation. Read the warranty size information below for additional details about your warrranty protection.
Back Side Routed Finger Pulls (priced per door)
(Click to enlarge)	Hand Pull Specifications: Hand pull routs are on the back side of the door and are minimally noticeable from a front view. Specify location: Bottom left (BL), Bottom Right (BR), Bottom Center (BC), Top Left (TL), Top Right (TR) or Top Center (TC) Rout is 3-5/8" wide and 3/8" deep. When specified as right or left, the rout begins 3" from the edge of door. Rout is centered on doors less than 10" wide. Not available with the following edge profiles: E-2, FP, L-253, L-304, L-686, L-947 and RC-2. Adds one day to lead time.

Product Warranty Information

Allowable tolerances for bow, warp or twist for single panel, multi-panel, frame only and mullion doors are as follows:

• Single panel up to 26" wide and 48" tall - 1/8"
• Multi-panel up to 26" wide and 48-1/16" to 64-15/16" tall = 1/4"
• Multi-panel up to 26" wide and 65" to 83-15/16" tall = 5/16"
• Single panel, single opening frame only and mullion doors over 26" wide and 48" tall will not be warranted (mullion lites not to be included in opening count)
• Any door exceeding 25-15/16" wide or 83-15/16" high will not be warranted.

Allowable tolerances for contraction, expansion and warpage for one and three piece products are:

• Up to 12" wide and 21-15/16" high - 1/8"
• 12-1/16" to 22" wide or 22" to 43-15/16" high - 1/4"
• Any one piece product exceeding 22" wide or 43-15/16" high will not be warranted
• All three piece products over 30" wide and 14" high are not warranted

Information about Conestoga product and finishing warranties.

Finishing Notes

When ordering unfinished, doors should be properly prepared prior to applying any finishing products. Be sure to read and understand the instructions provided by your finish manufacturer. You may need to perform additional sanding to prepare your products for finishing.

Cabinet doors are your way to reflect your personal vision on the look and feel of your kitchen. By selecting new cabinet doors for new construction or replacement cabinet doors for remodeling, you will find that your kitchen becomes your personal space in a whole new way. Your custom cabinet doors are available in a great selection of wood species which you will finish with your chosen stain, paint or finish.

If you need sample kitchen doors to try in your home, you may want to buy a full size door which can be used in your project, or you may order any size you prefer.

(Click on link or image above for measuring guide)

Special Handling Charges For Oversize Products