Blum Face Frame Mounting Plate
Item # 13624
Please Choose Or Scroll Down For More Info:
Starting at: $1.55 / Each
- Overlay Face Frame Adapter plate
- Front tabs align mounting plate
- B175H6000 (0mm) steel plate
- B175H6030 (3mm) steel plate
- B175H6060 (6mm) steel plate
- B175L6030.21 (3mm) cast metal plate (shown below)
Using Blum face frame mounting plate for inset doors
B175H5030.21 Inset Mount for Face Frame Cabinets | Blum Long Arm Hinge with B175H5030.21 Mount |
- Use B175H5030.21 which mounts on back side of face frame and is used with half crank Blum hinge
These hinges can also be used with the Blum 170 degree hinge.
Attach mounting plates with #6 wood screws
How to determine mounting plate thickness -
Selection of the hinge mounting plate will determine the amount of "overlap" or "overlay" of the door.
To determine plate requirement:
0mm = 3/4" overlay
3mm = 1/2" overlay
6mm = 3/8" overlay
-OR-
You can measure the thickness of the plate like this:
0MM | 3MM | 6MM |
1/4" thick | 3/8" thick | 1/2" thick |
Sold as each
Minimum order: 4
"How to" page for calculating hinge overlay
Questions? Visit the Cabinet Hinge Glossary