BLUM 120º Self-Closing Hinge For Overlay Doors

Item # 347

Please Choose Or Scroll Down For More Info:

Starting at: $2.25  / Each

Add to Cart:

Product Description

BLUM 120º Self-Closing Hinge For Overlay Doors

Designed to make installation and removal of doors a snap. A pressurized tab locks the hinge securely to the plate. Lifting the tab easily releases the hinge. Face frame construction is possible with the use of a face frame type mounting plate. 


  • Choose Hinge and Mounting plate to attain correct overlay or inset as follows:
  • 1/4" Overlay - Hinge B071T5650‚ Mounting Plate B175H710 - Frameless cabinet
  • 1/2" Overlay - Hinge B071T5550‚ Mounting Plate B175H713 - Frameless cabinet
  • Full Overlay - Hinge B071T5550‚ Mounting Plate B175H710 - Frameless cabinet
  • Inset - Hinge B071T5650‚ Mounting Plate B175H719 
  • 3/8" Overlay - Hinge B071T5550, Mounting Plate B175L6660.21 - Face frame cabinet
  • 1/2" Overlay - Hinge B071T5550, Mounting Plate B175L6630.21 - Face frame cabinet
  • 5/8" Overlay - Hinge B071T5550, Mounting Plate B175L6600.21 - Face frame cabinet
  • Inset - Hinge B071T5650, Mounting Plate B175H5030.21 - Face frame cabinet
  • All overlays based on a 5mm tab, or inset, from edge
  • Lifetime Warranty
  • Mounting Plates for Hinges are included in price when selected ab
Your Blum Hinge & Mounting Plate Reference Guide

Blum Face Frame Style Mounting Plate


Blum Frameless Style Mounting Plate

Blum Inset Mounting Block


Face Frame Style Cabinet Frameless Style Cabinet
Hinge Overlay Mounting Plate Hinge Overlay Mounting Plate
Inset (0 Overlay) Inset Overlay Framed Inset (0 Overlay) Inset Overlay Frameless
3/8" Overlay 3/8" Overlay Framed 1/2" Overlay 1/2" Overlay Frameless
1/2" Overlay 1/2" Overlay Framed 3/4" (Full) Overlay 3/4" Overlay Frameless
5/8" (Full) Overlay 5/8" Overlay Framed

Do I Need Press-On or Screw-On Hinges?

Back side of Press-In hinge - note the dowels Back side of Screw-On hinge - no dowels
Picture of press-on type hinge, back side Picture of screw-on type hinge, back side
Cabinet door prepared for Press-In hinges Cabinet door prepared for Screw-On hinges
Picture of reverse side of cabinet door, prepared for press-on type hinge, note the additional dowel holes bored next to the mortise cup Picture of reverse side of cabinet door, prepared for screw-on type hinge, there is only the mortise cup bored
Note:  The Press-In type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes.  The dowels in that case are already mounted.  If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.

Screws not included

Sold as each

Minimum order: 2

"How to" page for calculating hinge overlay

Questions? Visit the Cabinet Hinge Glossary