Lama 110° Long Arm Hinges - 9mm Crank
Item # 27840
Please Choose Or Scroll Down For More Info:
Starting at: $2.07 / Each
Lama Clip-on or Long Arm Hinges
These full overlay 110° degree hinges with their mounting plates (sold separately) can be used in either a frameless cabinet or on face frame cabinet . These high quality hinges just clip on to the mounting plates which are mounted on the cabinet. This makes placement and removal of the doors extremely convenient. The Lama hinge can also a replacement for the Jfh hinge.
|When You Buy||You Save|
This hinge requires a mounting plate (sold seperately).
The 9mm crank hinge is the general use hinge and is used in combination with 0mm mounting plate for cabinet door applications with an overlay of 3/8".
Do I need Press-on or Screw-on hinges?
Standard hinge installation screws work well in solid wood stock and plywood, but screws lose strength in medium density fiberboard (MDF) or particleboard. If your cabinet doors or cases are made from these materials, you may want to choose hinges that include barbed plastic inserts that fit in predrilled holes. Tightening the installation screw pushes each dowel against the wall of the hole for a firm grip.
|Back side of press-on hinge - note the dowels||Back side of screw-on hinge - no dowels|
|Cabinet door prepared for press-on hinges||Cabinet door prepared for screw-on hinges|
|Note: The press-on type hinge was developed for the manufacturers as a way to automatically align hinges and place them on the cabinet door in the proper location by just "pressing" them into the holes. The dowels in that case are already mounted. If you are replacing this type of hinge, you can get either type of hinge and either use the new dowels (which are already attached to the hinge) or you can use the screw-on and just use the screws already in your doweled door.|
Mounting plates sold seperately.
Minimum purchase 4
Questions? Visit the Cabinet Hinge Glossary